참고문헌 (26)

1. J Mater Sci Lu 26 917 1991 10.1007/BF00576768 Discontinuous crack growth in polyethylene under a constant load 

   상세보기

2. Chudnovsky A. Crack layer theory, NASA, Report #174634; 1984. 

3. Int J Fract Chudnovsky 97 83 1999 10.1023/A:1018683624720 Application of crack layer theory to modeling of slow crack growth in polyethylene 

   

4. Polym Engng Sci Choi 49 1421 2009 10.1002/pen.21436 The use of crack layer theory to predict the lifetime of the fatigue crack growth of high density polyethylene 

   상세보기

5. Polymer Chan 24 234 1983 10.1016/0032-3861(83)90139-8 Slow stable crack growth in high density polyethylenes 

   상세보기

6. J Mater Sci Parsons 34 3315 1999 10.1023/A:1004616728535 Correlation of stepwise fatigue and creep slow crack growth in high density polyethylene 

   상세보기

7. J Mater Sci Parsons 35 1857 2000 10.1023/A:1004741713514 Effect of strain rate on stepwise fatigue and creep slow crack growth in high density polyethylene 

   상세보기

8. Int J Fract Jasarevic 158 73 2000 10.1007/s10704-009-9365-0 Observation and modeling of brittle fracture initiation in a micro-heterogeneous material 

   상세보기

9. J Appl Phys Chudnovsky 62 4124 1987 10.1063/1.339128 A probabilistic model of brittle crack formation 

   상세보기

10. Int J Press Ves Pip Lei 73 199 1997 10.1016/S0308-0161(97)00070-7 Non-linear, axi-symmetric finite element analyses of a circumferentially cracked bar specimen 

    상세보기

11. Int J Press Ves Pip Nakano 44 3 1990 10.1016/0308-0161(90)90003-Z Measurement of dynamic fracture toughness by longitudinal impact of precracked round bar 

    상세보기

12. Int J Fract Scibetta 104 145 2000 10.1023/A:1007625612644 Fracture toughness analysis of circumferentially-cracked round bars 

    

13. Polymer Favier 43 1375 2002 10.1016/S0032-3861(01)00701-7 Slow crack propagation in polyethylene under fatigue at controlled stress intensity 

    상세보기

14. Engng Fract Mech Frank 76 2780 2009 10.1016/j.engfracmech.2009.06.009 A fracture mechanics concept for the accelerated characterization of creep crack growth in PE-HD pipe grades 

    상세보기

15. Polym Test Pinter 26 180 2007 10.1016/j.polymertesting.2006.09.010 Cyclic crack growth tests with CRB specimens for the evaluation of the long-term performance of PE pipe grades 

    상세보기

16. Zhou 2006 Crack initiation in pipe grade polyethylene. ANTEC 2006 

17. Engng Fract Mech Redhead 101 2 2013 10.1016/j.engfracmech.2012.09.022 Investigation of slow crack growth initiation in polyethylene pipe grades with accelerated cyclic tests 

    상세보기

18. Choi 2010 Evaluation of the crack initiation characteristics of pipe grade polyethylene under fatigue loads. ANTEC 2010 

19. Int J Fract Zhao 167 127 2011 10.1007/s10704-010-9532-3 Variation of the fatigue lifetime with the initial notch geometry of circular notched bar specimens 

    상세보기

20. Engng Fract Mech Ibrahim 28 455 1987 10.1016/0013-7944(87)90190-1 Validity requirements for fracture toughness measurements from small circumferentially notched cylindrical specimens 

    상세보기

21. ASME PVP Ibrahim 388 155 1999 An analytical approach for calculating KIc From eccentrically cracked cylinder specimen 

22. Int J Press Ves Pip Rihan 83 388 2006 10.1016/j.ijpvp.2006.02.019 Circumferential notched tensile (CNT) tests for generating KIscc data for cast iron vessels used in hot caustic solutions 

    상세보기

23. J Basic Engng Erdogan 85 519 1963 10.1115/1.3656897 On the crack extension in plates under plane loading and transverse shear 

    상세보기

24. Int J Press Ves Pip Ha 81 401 2004 10.1016/j.ijpvp.2004.03.011 Creep crack growth properties for 12CrWCoB rotor steel using circular notched specimens 

    상세보기

25. Int J Fract Yngvesson 102 L9 2000 10.1023/A:1007623622121 Eccentric circumferential cracks in cylindrical specimens 

    

26. Engng Fract Mech Ibrahim 64 49 1999 10.1016/S0013-7944(99)00056-9 Eccentricity correction for the evaluation of fracture toughness from cylindrical notched test small specimens 

    상세보기