최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기International journal of solids and structures, v.97/98, 2016년, pp.189 - 199
Wee, J.W. , Choi, B.H.
Because of the characteristic of high triaxial stress of a circular notched bar (CNB) specimen under tensile loads, it is a promising candidate for accelerated durability testing of high-density polyethylene (HDPE). To understand the slow crack growth (SCG) behavior of HDPE using a CNB specimen, it ...
Int. J. Press. Vessels Piping Ben Hadj Hamouda 86 228 2009 10.1016/j.ijpvp.2008.09.002 A local approach to creep fracture by slow crack growth in an MDPE: damage modelling
Int. J. Solids Struct. Cao 63 240 2015 10.1016/j.ijsolstr.2015.03.003 A model for ductile damage prediction at low stress triaxialities incorporating void shape change and void rotation
Polym. Eng. Sci. Choi 49 1421 2009 10.1002/pen.21436 The use of crack layer theory to predict the lifetime of the fatigue crack growth of high density polyethylene
Polym. Degrad. Stab. Choi 94 859 2009 10.1016/j.polymdegradstab.2009.01.016 Experimental and theoretical investigation of stress corrosion crack (SCC) growth of polyethylene pipes
Polym. Eng. Sci. Choi 49 2085 2009 10.1002/pen.21458 Modeling of the fracture mechanism of HDPE subjected to environmental stress crack resistance test
Int. J. Solids Struct. Choi 4 681 2005 10.1016/j.ijsolstr.2004.06.028 Fracture initiation associated with chemical degradation: observation and modeling
Chudnovsky, A., 1984. Crack Layer Theory. NASA report #174634.
Int. J. Eng. Sci. Chudnovsky 83 6 2014 10.1016/j.ijengsci.2014.05.015 Slow crack growth, its modeling and crack-layer approach: a review
Int. J. Eng. Sci. Chudnovsky 59 108 2012 10.1016/j.ijengsci.2012.03.016 Lifetime assessment of engineering thermoplastics
Eshelby 82 1999 Fundamental Contributions to the Continuum Theory of Evolving Phase Interfaces in Solids Energy relations and the energy-momentum tensor in continuum mechanics
Eng. Fract. Mech. Frank 76 2780 2009 10.1016/j.engfracmech.2009.06.009 A fracture mechanics concept for the accelerated characterization of creep crack growth in PE?HD pipe grades
Macromol. Symp. Frank 311 112 2012 10.1002/masy.201000096 Numerical assessment of PE 80 and PE 100 pipe lifetime based on Paris-Erdogan equation
Polym. Test. Frank 33 161 2014 10.1016/j.polymertesting.2013.11.013 Evaluation of the applicability of the cracked round bar test as standardized PE-pipe ranking tool
Int. J. Press. Vessels Piping Ha 81 401 2004 10.1016/j.ijpvp.2004.03.011 Creep crack growth properties for 12CrWCoB rotor steel using circular notched specimens
Eng. Fract. Mech. Hutar 78 3049 2011 10.1016/j.engfracmech.2011.09.001 A numerical methodology for lifetime estimation of HDPE pressure pipes
Polym. Eng. Sci. Kadota 32 1097 1992 10.1002/pen.760321607 Constitutive equations of crack layer growth
Eng. Fract. Mech. Kim 108 50 2013 10.1016/j.engfracmech.2013.04.015 Numerical analysis of asymmetric fatigue crack growth behaviors of circular notched bar specimen resulting from various geometric misalignments
Polymer Kurelec 46 6369 2005 10.1016/j.polymer.2005.05.061 Strain hardening modulus as a measure of environmental stress crack resistance of high density polyethylene
Polymer Lu 36 543 1995 10.1016/0032-3861(95)91563-M A fundamental theory for slow crack growth in polyethylene
J. Mater. Sci. Lu 26 917 1991 10.1007/BF00576768 Discontinuous crack growth in polyethylene under a constant load
Polym. Test. Nezbedova 32 106 2013 10.1016/j.polymertesting.2012.09.009 The applicability of the Pennsylvania notch Test for a new generation of PE pipe grades
Phys. Rev. Onsager 37 405 1931 10.1103/PhysRev.37.405 Reciprocal relations in irreversible processes. I
J. Mater. Sci. Parsons 34 3315 1999 10.1023/A:1004616728535 Correlation of stepwise fatigue and creep slow crack growth in high density polyethylene
J. Mater. Sci. Parsons 35 1857 2000 10.1023/A:1004741713514 Effect of strain rate on stepwise fatigue and creep slow crack growth in high density polyethylene
Polym. Test. Pinter 26 180 2007 10.1016/j.polymertesting.2006.09.010 Cyclic crack growth tests with CRB specimens for the evaluation of the long-term performance of PE pipe grades
Polymer Plummer 42 9551 2001 10.1016/S0032-3861(01)00476-1 Micromechanisms of slow crack growth in polyethylene under constant tensile loading
Plummer 3 2003 Fracture of Polymers, Composites and Adhesives II Micromechanisms of slow crack growth in polyethylene
Eng. Fract. Mech. Redhead 101 2 2013 10.1016/j.engfracmech.2012.09.022 Investigation of slow crack growth initiation in polyethylene pipe grades with accelerated cyclic tests
J. Mat. Sci. Lett. Sehanobish 4 890 1985 10.1007/BF00720531 Fractographic analysis of field failure in polyethylene pipe
J. Mater. Sci. Showaib 28 3617 1993 10.1007/BF01159845 Mechanistic analysis of fatigue crack initiation in medium-density polyethylene
J. Appl. Polym. Sci. Stojimirovic 46 1051 1992 10.1002/app.1992.070460614 An equilibrial process zone in polymeric materials
Tada 2000 The Stress Analysis of Cracks Handbook
Int. J. Eng. Sci. Zhang 83 42 2014 10.1016/j.ijengsci.2014.06.002 Applying the crack-layer concept to modeling of slow crack growth in polyethylene
Int. J. Soilds Struct. Zhang 38 5847 2001 10.1016/S0020-7683(00)00391-7 Numberical analysis of the influence of the load parameters on void growth
Int. J. Fatigue Zhao 51 26 2013 10.1016/j.ijfatigue.2013.01.016 Characterization of the fatigue crack behavior of pipe grade polyethylene using circular notched specimens
Int. J. Fract. Zhao 167 127 2011 10.1007/s10704-010-9532-3 Variation of the fatigue lifetime with the initial notch geometry of circular notched bar specimens
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.