참고문헌 (34)

1. Adv. Heat Transfer Martin 13 1 1977 10.1016/S0065-2717(08)70221-1 Heat and mass transfer between impinging gas jets and solid surfaces 

   

2. Int. J. Heat Fluid Flow Jambunathan 13 2 106 1992 10.1016/0142-727X(92)90017-4 A review of heat transfer data for single circular jet impingement 

   상세보기

3. Adv. Heat Transfer Webb 26 105 1995 10.1016/S0065-2717(08)70296-X Single-phase liquid jet impingement heat transfer 

   

4. Annu. Rev. Heat Transfer Garimella 11 413 1999 10.1615/AnnualRevHeatTransfer.v11.90 Heat transfer and flow fields in confined jet impingement 

   상세보기

5. Heat Transfer Eng. Agostini 28 258 2007 10.1080/01457630601117799 State of the art of high heat flux cooling technologies 

   상세보기

6. Int. J. Heat Mass Transfer Ndao 52 4317 2009 10.1016/j.ijheatmasstransfer.2009.03.069 Multi-objective thermal design optimization and comparative analysis of electronics cooling technologies 

   상세보기

7. Top. Heat Transfer HTD Sullivan 206-2 103 1993 Use of smooth and roughened spreader plates to enhance impingement cooling of small heat sources with single circular liquid jets 

8. Int. J. Heat Fluid Flow Ekkad 23 22 2002 10.1016/S0142-727X(01)00139-4 Jet impingement heat transfer on dimpled target surfaces 

   상세보기

9. Int. J. Rotating Mach. Azad 8 161 2002 Jet impingement heat transfer on pinned surfaces using a transient liquid crystal technique 

10. K.L. Teuscher, S. Ramadhyani, F.P. Incropera, Jet Impingement Cooling of an Array of Discrete Heat Sources with Extended Surfaces, In Enhanced cooling techniques for electronic applications, ASME HTD-Vol. 263, pp. 1-10, S.V. Garimella, M. Greiner, M.M. Yovanovich, V.W. Antonetti, Eds., ASME Winter Annual Meeting, New Orleans, November 28-December 3, 1993. 

11. IEEE Trans. Compon. Packag. Technol. Kondo 23 240 2000 Optimization of pin-fin heat sinks for impingement cooling of electronic pakages 

12. IEEE Trans. Compon. Packag. Technol. Brignoni 22 399 1999 10.1109/6144.796542 Experimental optimization of confined air jet impingement on a pin fin heat sink 

    상세보기

13. IEEE Trans. Compon. Packag. Technol. El-Sheikh 23 113 2001 Heat transfer from pin-fin heat sinks under muliple impinging jets 

14. IEEE Trans. Compon. Packag. Technol. El-Sheikh 23 300 2000 10.1109/6144.846768 Enhancement of air jet impingement heat transfer using pin-fin heat sinks 

    상세보기

15. IEEE Trans. Compon. Packag. Technol. Maveety 25 3 459 2002 10.1109/TCAPT.2002.803650 Heat transfer from square pin-fin heat sinks using air impingement cooling 

    상세보기

16. J. Heat Transfer Jang 127 770 2005 10.1115/1.1924628 Fluid flow and thermal characteristics of a microchannel heat sink subject to an impinging air jet 

    상세보기

17. Int. J. Heat Mass Transfer Li 48 5386 2005 10.1016/j.ijheatmasstransfer.2005.07.007 Thermal performance measurement of heat sinks with confined impinging jet by infrared thermography 

    상세보기

18. Int. J. Heat Mass Transfer Kim 52 3510 2009 10.1016/j.ijheatmasstransfer.2009.02.041 Comparison of thermal performaces of plate-fin and pin-fin heat sinks subject to an impinging flow 

    상세보기

19. Int. J. Heat Mass Transfer Lee 42 1555 1999 10.1016/S0017-9310(98)00265-8 Comparative analysis of jet impingement and microchannel cooling for high heat flux applications 

    상세보기

20. IEEE Trans. Compon. Packag. Technol. Jonsson 24 142 2001 10.1109/6144.926376 Modeling of the thermal and hydraulic performance of plate fin, strip fin, and pin fin heat sinks - influence of flow bypass 

    상세보기

21. Int. J. Heat Mass Transfer Yang 50 4661 2007 10.1016/j.ijheatmasstransfer.2007.03.006 A comparative study of the airside performance of heat sinks having pin fin configurations 

    상세보기

22. J. Electron. Packag. Khan 128 324 2006 10.1115/1.2351896 The role of fin geometry in heat sink performance 

    상세보기

23. Appl. Therm. Eng. Sahiti 27 111 2007 10.1016/j.applthermaleng.2006.05.018 Selection and optimization of pin cross-sections for electronics cooling 

    상세보기

24. S. Ndao, Single-phase and flow boiling heat transfer of jet impingement on smooth and enhanced micro structured surfaces, Ph.D. Thesis, Rensselaer Polytechnic Institute, Troy, NY, 2010. 

25. Int. J. Heat Mass Transfer Ndao 55 413 2012 10.1016/j.ijheatmasstransfer.2011.09.037 Heat transfer enhancement from micro pin fins subjected to an impinging jet 

    상세보기

26. Mech. Eng. Kline 75 3 1953 Describing uncertainties in single sample experiments 

27. J. Electron. Packag. Lee 129 221 2007 10.1115/1.2753884 Jet impingement cooling of chips equipped with multiple cylindrical pedestral fins 

    상세보기

28. Exp. Therm. Fluid Sci. Armellini 33 604 2009 10.1016/j.expthermflusci.2008.12.005 Separated flow structures around a cylindrical obstacle in a narrow channel 

    상세보기

29. Int. J. Heat Fluid Flow Delibra 31 740 2010 10.1016/j.ijheatfluidflow.2010.03.004 Vortex structures and heat transfer in a wall-bounded pin matrix: LES with a RANS wall-treatment 

    상세보기

30. Int. J. Heat Mass Transfer Lawson 54 4099 2011 10.1016/j.ijheatmasstransfer.2011.04.001 Heat transfer from multiple row arrays of low aspect ratio pin fins 

    상세보기

31. Int. J. Heat Mass Transfer Won 47 1731 2004 10.1016/j.ijheatmasstransfer.2003.10.007 Spatially-resolved heat transfer and flow structure in a rectangular channel with pin fins 

    상세보기

32. Int. J. Heat Mass Transfer Liu 54 5602 2011 10.1016/j.ijheatmasstransfer.2011.07.013 Experimental study on liquid flow and heat transfer in micro square pin fin heat sink 

    상세보기

33. Int. J. Microcircuits Electron. Packag. Soodphakdee 24 68 2001 A comparison of fin geometries for heatsinks in laminar forced convection: Part I. Round, elliptical, and plate fins in staggered and in-line configurations 

34. Int. J. Heat Mass Transfer Ndao 55 50935101 2012 10.1016/j.ijheatmasstransfer.2012.05.009 Experimental investigation of flow boiling heat transfer of jet impingement on smooth and micro structured surfaces 

    상세보기

활용도 Top5 논문

더보기

해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.