최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기International journal of automotive technology, v.15 no.4, 2014년, pp.565 - 571
Xie, M. S. , Zhang, G. R. , Li, J. H. , Fritsch, R.
초록이 없습니다.
Tribology L. Bowei 29 385 2009 Bowei, L., Yang, Y. and Xiang, X. (2009). The research on brake noise of automobile. Tribology, 29, 385-342.
Wear M. Eriksson 252 26 2002 10.1016/S0043-1648(01)00849-3 Eriksson, M., Bergman, F. and Jacobson, S. (2002). On the nature of tribiological contact in automotive brakes. Wear, 252, 26-36.
J. Sound and Vibration J. Flint 254 1 2002 10.1006/jsvi.2001.4052 Flint, J. and Hulten, J. (2002). Lining deformation induced modal coupling as squeal generator in a distributed parameter disc brake model. J. Sound and Vibration, 254, 1-21.
J. Sound and Vibration D. Guan 261 297 2003 10.1016/S0022-460X(02)01074-X Guan, D. and Huang, J. (2003). The method of feed-inenergy on disc brake squeal. J. Sound and Vibration, 261, 297-307.
China J. Mechanical Engineering C. Guangxiong 38 85 2002 Guangxiong, C., Zhongrong, Z., Hong, L. and Qiyue, L. (2002). Profile analysis related to friction induced noise under reciprocating sliding conditions. China J. Mechanical Engineering, 38, 85-88.
Wear L. Hammerström 261 53 2006 10.1016/j.wear.2005.09.021 Hammerström, L. and Jacobson, S. (2006). Surface modication of brake discs to reduce squeal problems. Wear, 261, 53-57.
Tribology H. Hetzler 46 237 2012 10.1016/j.triboint.2011.05.019 Hetzler, H. and Willner, K. (2012). On the influence of contact tribology on brake squeal. Tribology, 46, 237-246.
Int. J. Automotive Technology Y. G. Joe 9 2 161 2008 10.1007/s12239-008-0021-x Joe, Y. G., Cha, B. G., Sim, H. J., Lee, H. J. and Oh, J. E. (2008). Analysis of disc brake instability due to frictioninduced vibration using a distributed parameter model. Int. J. Automotive Technology 9, 2, 161-171.
Int. J. Automotive Technology Y. G. Joe 9 2 161 2008 10.1007/s12239-008-0021-x Joe, Y. G., Cha, B. G., Sim, H. J., Lee, H. J. and Oh, J. E. (2008). Analysis of disc brake instability due to frictioninduced vibration using a distributed parameter model. Int. J. Automotive Technology 9, 2, 161-171.
J. Sound and Vibration N. M. Kinkaid 267 105 2003 10.1016/S0022-460X(02)01573-0 Kinkaid, N. M., O’Reilly, O. M. and Papadopoulos, P. (2003). Automotive disc brake squeal. J. Sound and Vibration, 267, 105-166.
Applied Acoustics P. Liu 68 603 2007 10.1016/j.apacoust.2006.03.012 Liu, P., Zheng, H., Cai, C., Wang, Y. Y., Lu, C., Ang, K. N. and Liu, G. R. (2007). Analysis of disc brake squeal using the complex eigenvalue method. Applied Acoustics, 68, 603-615.
Applied Acoustics T. Mário 69 147 2008 10.1016/j.apacoust.2007.10.003 Mário, T., Samir, N. Y. and Roberto, J. (2008). Analysis of brake squeal noise using the finite element method: A parametric study. Applied Acoustics, 69, 147-162.
J. Sound and Vibration V. G. Oancea 213 577 1998 10.1006/jsvi.1997.1496 Oancea, V. G. and Laursen, T. A. (1998). Investigations of low frequency stick-slip motion: Experiments and numerical modeling. J. Sound and Vibration, 213, 577-600.
Wear A. Rahim 264 1069 2008 10.1016/j.wear.2007.08.015 Rahim, A. and Ouyang, H. (2008). Wear prediction of friction material and brake squeal using the finite element method. Wear, 264, 1069-1076.
Int. J. Automotive Technology K. Shin 5 1 61 2004 Shin, K., Brennan, M. J, Joe, Y. G. and Oh, J.-E. (2004). Simple models to investigate the effect of velocity dependent friction on the disc brake squeal noise. Int. J. Automotive Technology 5, 1, 61-67.
J. Sound and Vibration R. Singh 30 10 18 1998 Singh, R., Sheikh, A. and Mitchell, M. (1998). Viscoelastic damping to control disc brake squeal. J. Sound and Vibration 30, 10, 18-22.
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.