최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Ceramics international, v.41 no.3 pt.A, 2015년, pp.3961 - 3967
Manshor, H. , Md Aris, S. , Azhar, A.Z.A. , Abdullah, E.C. , Ahmad, Z.A.
Ceramic composite made up of zirconia-toughened alumina (ZTA) with TiO2 as additive was constructed via a solid-state sintering route. The Vickers hardness of the obtained ZTA-TiO2 was evaluated at various levels of the TiO2 addition. Every sample was dry mixed, uniaxially pressed and sintered at 16...
Ceram. Int. Ye 34 1797 2008 10.1016/j.ceramint.2007.06.005 Microstructure and mechanical properties of yttria-stabilized ZrO2/Al2O3 nanocomposite ceramics
J. Mater. Process. Technol. Smuk 133 195 2003 10.1016/S0924-0136(02)00232-7 Alumina ceramics with partially stabilized zirconia for cutting tools
J. Alloys Compd. Azhar 478 608 2009 10.1016/j.jallcom.2008.11.156 Effect of Al2O3/YSZ microstructures on wear and mechanical properties of cutting inserts
Int. J. Refract. Met. Hard Mater. Rejab 36 162 2012 10.1016/j.ijrmhm.2012.08.010 The effects of CeO2 addition on the physical, microstructural and mechanical properties of yttria stabilized zirconia toughened alumina (ZTA)
Ceram. Int. Sktani 40 6211 2014 10.1016/j.ceramint.2013.11.076 The influence of in-situ formation of hibonite on the properties of zirconia toughened alumina (ZTA) composites
J. Alloys Compd. Azhar 513 91 2012 10.1016/j.jallcom.2011.09.092 Effects of Cr2O3 addition on the mechanical properties, microstructure and wear performance of zirconia-toughened-alumina (ZTA) cutting inserts
J. Eur. Ceram. Soc. Magnani 25 3383 2005 10.1016/j.jeurceramsoc.2004.09.025 Effect of the composition and sintering process on mechanical properties and residual stresses in zirconia-alumina composites
Mater. Sci. Eng. A Basu 380 215 2004 10.1016/j.msea.2004.03.065 Toughness tailoring of yttria-doped zirconia ceramics
Adv. Mater. Res. Wang 488-489 335 2012 10.4028/www.scientific.net/AMR.549.335 Effect of MgO additive on microstructure of Al2O3
Ceram. Int. Rittidech 39 S433 2013 10.1016/j.ceramint.2012.10.108 Effect of adding Y2O3 on structural and mechanical properties of Al2O3-ZrO2 ceramics
Ceram. Int. Zu 40 3989 2014 10.1016/j.ceramint.2013.08.049 Effects of liquid phases on densification of TiO2-doped Al2O3-ZrO2 composite ceramics
J. Eur. Ceram. Soc. Ortmann 32 777 2012 10.1016/j.jeurceramsoc.2011.11.002 Preparation and characterization of ZTA bioceramics with and without gradient in composition
J. Am. Ceram. Soc. Bagley 53 136 1970 10.1111/j.1151-2916.1970.tb12055.x Effect of TiO2 on initial sintering of Al2O3
Ceram. Int. Maitra 33 239 2007 10.1016/j.ceramint.2005.09.007 The role of TiO2 in the densification of low cement Al2O3-MgO spinel castable
Mater. Sci. Eng. A Wang 492 306 2008 10.1016/j.msea.2008.04.048 Effect of TiO2 addition on the sintering behavior, hardness and fracture toughness of an ultrafine alumina
J. Alloys Compd. Azhar 497 316 2010 10.1016/j.jallcom.2010.03.054 The effects of MgO addition on microstructure, mechanical properties and wear performance of zirconia-toughened alumina cutting inserts
Mater. Sci. Eng. A Rejab 595 18 2014 10.1016/j.msea.2013.11.091 Effects of MgO addition on the phase, mechanical properties, and microstructure of zirconia-toughened alumina added with CeO2 (ZTA-CeO2) ceramic composite
Ceram. Int. Cesari 32 249 2006 10.1016/j.ceramint.2005.02.012 Fracture toughness of alumina-zirconia composites
J. Alloys Compd. Basu 372 278 2004 10.1016/j.jallcom.2003.09.157 ZrO2-Al2O3 composites with tailored toughness
J. Am. Ceram. Soc. Miller 89 350 2006 10.1111/j.1551-2916.2005.00674.x Solubility limit of MgO in Al2O3 at 1600°C
10.1111/j.1151-2916.2000.tb01508.x Bondioli, F., Ferrari, A. M., Leonelli, C., Manfredini, T., Linati, L., & Mustarelli, P. (2000). Reaction mechanism in alumina/chromia (Al2O3-Cr2O3) solid solutions obtained by coprecipitation. Journal of the American Ceramic Society, 83(8), 2036-2040.
Wessel 2004 The Handbook of Advanced Materials: Enabling New Designs
Ceram. Int. Akin 37 3273 2011 10.1016/j.ceramint.2011.05.123 Effect of CeO2 addition on densification and microstructure of Al2O3-YSZ composites
J. Mater. Sci. Saha 35 3931 2000 10.1023/A:1004849918509 Strengthening of alumina by cerium-zirconate (Ce2Zr2O7)
Ceram. Int. Li 31 945 2005 10.1016/j.ceramint.2004.10.007 Influence of cobalt phase on mechanical properties and thermal shock performance of Al2O3-TiC composites
Ceram. Int. Wang 40 11139 2014 10.1016/j.ceramint.2014.03.139 Microstructures and mechanical properties of Al2O3-C refractories with addition of microcrystalline graphite
Ceram. Int. Liang 40 10699 2014 10.1016/j.ceramint.2014.03.055 In situ toughening of pressureless liquid phase sintered α-SiC by using TiO2
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.