최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기The Journal of oral implantology, v.40 no.6, 2014년, pp.641 - 648
Haselhuhn, Klaus (Department of Prosthodontics and Biomaterials, Centre for Implantology, University Hospital RWTH Aachen, Aachen, Germany.) , Marotti, Juliana (Department of Prosthodontics and Biomaterials, Centre for Implantology, University Hospital RWTH Aachen, Aachen, Germany.) , Tortamano, Pedro (Department of Prosthodontics, School of Dentistry, University of Sã) , Weiss, Claudia (o Paulo, Sã) , Suleiman, Lubna (o Paulo-SP, Brazil.) , Wolfart, Stefan (Institute for Medical Statistics, University Hospital RWTH Aachen, Aachen, Germany.)
Passive fit of the prosthetic superstructure is important to avoid complications; however, evaluation of passive fit is not possible using conventional procedures. Thus, the aim of this study was to check and locate mechanical stress in bar restorations fabricated using two casting techniques. Fifte...
Int J Oral Maxillofac Implants Karl 19 30 2004 In vitro study on passive fit in implant-supported 5-unit fixed partial dentures
J Craniofac Surg Monteiro 21 2026 2010 10.1097/SCS.0b013e3181f537fa Gennari Filho H, Pesqueira AA. Passivity in implant-supported prosthesis
Int J Prosthodont Ortorp 16 194 2003 Comparisons of precision of fit between cast and CNC-milled titanium implant frameworks for the edentulous mandible
J Prosthet Dent Takahashi 89 256 2003 10.1067/mpr.2003.40 Fit of implant frameworks: an in vitro comparison between two fabrication techniques
Int J Oral Maxillofac Implants Tahmaseb 25 247 2010 Parameters of passive fit using a new technique to mill implant-supported superstructures: an in vitro study of a novel three-dimensional force measurement-misfit method
Clin Oral Implants Res Heckmann 17 345 2006 10.1111/j.1600-0501.2005.01177.x Loading of bone surrounding implants through three-unit fixed partial denture fixation: a finite-element analysis based on in vitro and in vivo strain measurements
Int J Oral Maxillofac Implants Yamamoto 25 1115 2010 Accuracy of four transfer impression techniques for dental implants: a scanning electron microscopic analysis
Int J Oral Maxillofac Implants Del Acqua 25 1153 2010 Mollo Fde A Jr. The effect of splint material rigidity in implant impression techniques
Int J Oral Maxillofac Implants Abduo 25 506 2010 Assessing the fit of implant fixed prostheses: a critical review
Int J Oral Maxillofac Implants Kano 22 879 2007 A classification system to measure the implant-abutment microgap
J Prosthodont Clelland 5 193 1996 10.1111/j.1532-849X.1996.tb00296.x Comparison of strains transferred to a bone simulant between as-cast and postsoldered implant frameworks for a five-implant-supported fixed prosthesis
Quintessence Int Fischer 40 515 2009 Misfit of suprastructures on implants processed by electrical discharge machining or the Cresco method
J Prosthet Dent Prasad 101 221 2009 10.1016/S0022-3913(09)00037-7 Repairing an implant titanium milled framework using laser welding technology: a clinical report
Stomatologija Silva 10 96 2008 De Arruda Nobilo MA, Pessanha Henriques GE, Mesquita MF, Guimaraes MB. Influence of laser-welding and electroerosion on passive fit of implant-supported prosthesis
J Prosthodont de Aguiar 18 230 2009 10.1111/j.1532-849X.2008.00405.x Mattos Mde G, Ribeiro RF. An alternative section method for casting and posterior laser welding of metallic frameworks for an implant-supported prosthesis
J Prosthet Dent Longoni 91 595 2004 10.1016/j.prosdent.2004.02.016 A simplified method to reduce prosthetic misfit for a screw-retained, implant-supported complete denture using a luting technique and laser welding
Int J Oral Maxillofac Implants Valente 24 234 2009 Accuracy of computer-aided oral implant surgery: a clinical and radiographic study
Int J Oral Maxillofac Implants Winter 25 947 2010 Bone loading caused by different types of misfits of implant-supported fixed dental prostheses: a three-dimensional finite element analysis based on experimental results
J Prosthodont Clelland 4 243 1995 10.1111/j.1532-849X.1995.tb00350.x Comparison of strains transferred to a bone simulant among implant overdenture bars with various levels of misfit
Dent Mater Ortorp 27 356 2011 10.1016/j.dental.2010.11.015 The fit of cobalt-chromium three-unit fixed dental prostheses fabricated with four different techniques: a comparative in vitro study
J Prosthodont Carr 5 248 1996 10.1111/j.1532-849X.1996.tb00507.x The accuracy of implant verification casts compared with casts produced from a rigid transfer coping technique
Quintessence Int Rubeling 30 38 1999 New techniques in spark erosion: the solution to an accurately fitting screw-retained implant restoration
Clin Oral Implants Res Mericske-Stern 11 Suppl 1 108 2000 10.1034/j.1600-0501.2000.011S1108.x Management of the edentulous patient
Int J Prosthodont Murphy 15 133 2002 A prospective 5-year study of two cast framework alloys for fixed implant-supported mandibular prostheses
Int J Oral Maxillofac Implants Standlee 17 220 2002 Accuracy of mechanical torque-limiting devices for implants
Int J Oral Maxillofac Implants Tan 17 175 2002 The effect of 3 torque delivery systems on gold screw preload at the gold cylinder-abutment screw joint
Int J Oral Maxillofac Implants Watanabe 15 209 2000 Analysis of stress distribution in a screw-retained implant prosthesis
J Prosthet Dent Nissan 86 20 2001 10.1067/mpr.2001.115182 Stress levels for well-fitting implant superstructures as a function of tightening force levels, tightening sequence, and different operators
Int J Oral Maxillofac Implants Jemt 6 270 1991 Failures and complications in 391 consecutively inserted fixed prostheses supported by Branemark implants in edentulous jaws: a study of treatment from the time of prosthesis placement to the first annual checkup
J Prosthet Dent Branemark 50 399 1983 10.1016/S0022-3913(83)80101-2 Osseointegration and its experimental background
Implant Dent Sahin 10 85 2001 10.1097/00008505-200104000-00003 The significance of passive framework fit in implant prosthodontics: current status
J Prosthodont Kunavisarut 11 30 2002 Finite element analysis on dental implant-supported prostheses without passive fit
J Prosthodont Abreu 19 425 2010 10.1111/j.1532-849X.2010.00612.x Influence of material of overdenture-retaining bar with vertical misfit on three-dimensional stress distribution
J Prosthet Dent Burns 89 250 2003 10.1067/mpr.2003.38 Accuracy of open tray implant impressions: an in vitro comparison of stock versus custom trays
Int J Oral Maxillofac Implants Jemt 7 40 1992 Failures and complications in 127 consecutively placed fixed partial prostheses supported by Branemark implants: from prosthetic treatment to first annual checkup
Int J Oral Maxillofac Implants Kallus 9 169 1994 Loose gold screws frequently occur in full-arch fixed prostheses supported by osseointegrated implants after 5 years
J Prosthet Dent Carr 76 500 1996 10.1016/S0022-3913(96)90008-6 The response of bone in primates around unloaded dental implants supporting prostheses with different levels of fit
Int J Oral Maxillofac Implants Jemt 11 620 1996 Book K. Prosthesis misfit and marginal bone loss in edentulous implant patients
Oral Surg Oral Med Oral Pathol Oral Radiol Endod Michaels 83 198 1997 10.1016/S1079-2104(97)90006-8 Effect of prosthetic superstructure accuracy on the osteointegrated implant bone interface
J Dent Hayashi 33 669 2005 10.1016/j.jdent.2005.01.006 Influence of explorer tip diameter in identifying restoration margin discrepancies
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.