최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Chemical engineering science, v.130, 2015년, pp.41 - 55
Tian, Z. , Chen, K.R. , Liu, B.P. , Luo, N. , Du, W.L. , Qian, F.
This work aims to develop a model that can predict the short-chain branching distribution (SCBD) of bimodal polyethylene (BPE) for an industrial Borstar process and correlate it with an updated structure-performance model (SPM) to estimate the slow crack growth (SCG) performance of the product. To c...
Polym. Eng. Sci. Early View Adib 2014 The effect of microstructure on the slow crack growth resistance in polyethylene resins
Chem. Eng. J. Alizadeh 97 27 2004 10.1016/S1385-8947(03)00133-5 Modeling of fluidized bed reactor of ethylene polymerization
Macromol. React. Eng. Al-Saleh 5 587 2011 10.1002/mren.201100053 The integrated deconvolution estimation model: estimation of reactivity ratios per site type for ethylene/1-butene copolymers made with a heterogeneous Ziegler-Natta catalyst
Macromol. React. Eng. Al-Saleh 6 189 2012 10.1002/mren.201100079 The integrated deconvolution estimation model: effect of inter-laboratory 13C NMR analysis on IDEM performance
Macromol. Symp. Alt 163 135 2001 10.1002/1521-3900(200101)163:1<135::AID-MASY135>3.0.CO;2-7 Bimodal polyethylene-interplay of catalyst and process
Adv. Mater. Bohm 4 234 1992 10.1002/adma.19920040317 High-density polyethylene pipe resins
Angew. Chem. Int. Ed. Bohm 42 5010 2003 10.1002/anie.200300580 The ethylene polymerization with Ziegler catalysts: fifty years after the discovery
Polymer Cazenave 47 3904 2006 10.1016/j.polymer.2006.03.094 Short-term mechanical and structural approaches for the evaluation of polyethylene stress crack resistance
Macromol. React. Eng. Chadwick 3 428 2009 10.1002/mren.200900043 Polyolefins-catalyst and process innovations and their impact on polymer properties
CIESC J Chen 65 1978 2014 Application of PC-SAFT with updated binary interaction parameters in phase equilibrium calculation for supercritical ethylene coordination polymerization system
Ind. Eng. Chem. Res. Chen 53 19905 2014 10.1021/ie503456e Modeling and simulation of Borstar bimodal polyethylene process based on a rigorous PC-SAFT equation of state model
Chem. Eng. Sci. Covezzi 56 4059 2001 10.1016/S0009-2509(01)00077-X The multizone circulating reactor technology
Polymer Deblieck 52 2979 2011 10.1016/j.polymer.2011.03.055 Failure mechanisms in polyolefines: the role of crazing, shear yielding and the entanglement network
Polym. Eng. Sci. DesLauriers 45 1203 2005 10.1002/pen.20390 A comparative study of multimodal vs. bimodal polyethylene pipe resins for PE-100 applications
J. Polym. Sci. Polym. Chem. Deslauriers 45 3135 2007 10.1002/pola.22174 Short chain branching profiles in polyethylene from the Phillips Cr/silica catalyst
Macromol. Symp. DesLauriers 282 136 2009 10.1002/masy.200950814 Estimating slow crack growth performance of polyethylene resins from primary structures such as molecular weight and short chain branching
DesLauriers, P.J., Rohlfing, D.C., 2010. Method for Employing SEC-FTIR Data to Predict Mechanical Properties of Polyethylene. US 7803629 B2.
DesLauriers, P.J., Rohlfing, D.C., 2011. System and Method for Estimating Density of a Polymer. US 0035193 A1.
J. Appl. Polym. Sci. Garcia 121 3269 2011 10.1002/app.33911 Effects of the structural components on slow crack growth process in polyethylene blends. Composition intervals prediction for pipe applications
Macromol. React. Eng. Gemoets 4 109 2010 10.1002/mren.200900055 Kinetic study of ethylene homopolymerization in slurry using a Ziegler-Natta catalyst
CIESC J. Gu 64 649 2013 Optimization of ethylene slurry polymerization conditions based on molecular weight distribution
J. Mater. Sci. Huang 23 3648 1988 10.1007/BF00540508 The effect of molecular weight on slow crack slow growth in linear polyethylene homopolymers
J. Polym. Sci. Polym. Phys. Huang 29 129 1991 10.1002/polb.1991.090290116 Denpendence of slow crack growth in polyethylene on butyl branch density-morphology and theory
Polymer Hubert 42 8425 2001 10.1016/S0032-3861(01)00351-2 Physical and mechanical properties of polyethylene for pipes in relation to molecular architecture. I. Microstructure and crystallisation kinetics
J. Appl. Polym. Sci. Hubert 84 2308 2002 10.1002/app.10538 Physical and mechanical properties of polyethylene for pipes in relation to molecular architecture. II. Short-term creep of isotropic and drawn materials
Ind. Eng. Chem. Res. Jiang 52 2501 2013 10.1021/ie301971k Advanced catalyst technology for broad/bimodal polyethylene, achieved by polymer-coated particles supporting hybrid catalyst
Ind. Eng. Chem. Res. Khare 41 5601 2002 10.1021/ie020451n Steady-state and dynamic modeling of commercial slurry high-density polyethylene (HDPE) processes
Ind. Eng. Chem. Res. Khare 43 884 2004 10.1021/ie030714t Steady-state and dynamic modeling of gas-phase polypropylene processes using stirred-bed reactors
Chem. Eng. Technol. Kiashemshaki 27 1227 2004 10.1002/ceat.200401964 Reactor modeling of gas-phase polymerization of ethylene
J. Process. Control Kiparissides 16 205 2006 10.1016/j.jprocont.2005.06.004 Challenges in particulate polymerization reactor modeling and optimization: a population balance perspective
Macromolecules Krishnaswamy 41 1693 2008 10.1021/ma070454h Effect of the distribution of short-chain branches on crystallization kinetics and mechanical properties of high-density polyethylene
Macromolecules Kurek 46 9197 2013 10.1021/ma401971c Silica nanofoam (NF) supported single- and dual-site catalysts for ethylene polymerization with morphology control and tailored bimodal molar mass distributions
Ind. Eng. Chem. Res. Li 53 1088 2014 10.1021/ie403315v Bimodal/broad polyethylene prepared in a disentangled state
Eur. Polym. J. Liu 49 1823 2013 10.1016/j.eurpolymj.2013.04.008 Synthesis of molecular weight controllable bimodal polyethylene from fluorinated FI-Ti catalyst coupled with ZnEt2
Chem. Eng. J. Luo 149 370 2009 10.1016/j.cej.2009.01.021 Steady-state and dynamic modeling of commercial bulk polypropylene process of Hypol technology
AIChE J. McAuley 36 837 1990 10.1002/aic.690360605 A kinetic model for industrial gas-phase ethylene polymerization
Chem. Eng. Sci. McAuley 49 2035 1994 10.1016/0009-2509(94)E0030-T A comparison of two-phase and well-mixed models for fluidized-bed reactors
Chin. J. Chem. Eng. Meng 21 850 2013 10.1016/S1004-9541(13)60553-4 Modeling and simulation of ethylene polymerization in industrial slurry reactor series
J. Polym. Sci. Polym. Phys. Mirabella 40 1637 2002 10.1002/polb.10228 Determination of the crystallinity of polyethylene/alpha-olefin copolymers by thermal analysis: relationship of the heat of fusion of 100% polyethylene crystal and the density
Macromol. React. Eng. Mueller 5 261 2011 10.1002/mren.201100011 Polymerization reactor modeling in industry
Prog. Polym. Sci. Muller 30 559 2005 10.1016/j.progpolymsci.2005.03.001 Thermal fractionation of polymers
J. Appl. Polym. Sci. Patel 60 749 1996 10.1002/(SICI)1097-4628(19960502)60:5<749::AID-APP14>3.0.CO;2-U Theoretical prediction of tie-chain concentration and its characterization using postyield response
AIChE J. Pontes 54 2346 2008 10.1002/aic.11566 Optimal operating policies for tailored linear polyethylene resins production
AIChE J. Pontes 57 2149 2011 10.1002/aic.12438 Optimal process operation for the production of linear polyethylene resins with tailored molecular weight distribution
AIChE J. Reginato 49 2642 2003 10.1002/aic.690491017 Modeling and simulation of propylene polymerization in nonideal loop reactors
Polymer Shan 43 7345 2002 10.1016/S0032-3861(02)00703-6 HDPE/LLDPE reactor blends with bimodal microstructures-Part 1: Mechanical properties
Polymer Shan 44 177 2003 10.1016/S0032-3861(02)00721-8 HDPE/LLDPE reactor blends with bimodal microstructures-Part II: Rheological properties
Comput. Chem. Eng. Shamiri 36 35 2012 10.1016/j.compchemeng.2011.07.015 Improved single phase modeling of propylene polymerization in a fluidized bed reactor
Soares 229 2012 Polyolefin Reaction Engineering
Macromol. React. Eng. Soares 8 235 2014 10.1002/mren.201300173 The use of instantaneous distributions in polymerization reaction engineering
J. Appl. Polym. Sci. Tian 125 2668 2012 10.1002/app.36473 Modeling and simulation of polypropylene particle size distribution in industrial horizontal stirred bed reactors
AIChE J. Tian 59 4468 2013 10.1002/aic.14248 An atmosphere-switching polymerization process: a novel strategy to advanced polyolefin materials
Chem. Eng. Sci. Tian 101 686 2013 10.1016/j.ces.2013.07.004 A model for the structures of impact polypropylene copolymers produced by an atmosphere-switching polymerization process
Chem. Eng. Sci. Touloupides 65 3208 2010 10.1016/j.ces.2010.02.014 Modeling and simulation of an industrial slurry-phase catalytic olefin polymerization reactor series
Macromol. React. Eng. Touloupidis 8 508 2014 10.1002/mren.201300188 Catalytic olefin polymerization process modeling: multi-scale approach and modeling guidelines for micro-scale/kinetic modeling
AIChE J. Weng 60 2498 2014 10.1002/aic.14445 A novel strategy for dynamic optimization of grade transition processes based on molecular weight distribution
Ind. Eng. Chem. Res. Xie 33 449 1994 10.1021/ie00027a001 Gas-phase ethylene polymerization-production processes, polymer properties, and reactor modeling
Chem. Eng. Sci. Zacca 48 3743 1993 10.1016/0009-2509(93)80218-F Modelling of the liquid phase polymerization of olefins in loop reactors
Chem. Eng. Sci. Zacca 52 1941 1997 10.1016/S0009-2509(97)00026-2 Reactor residence-time distribution effects on the multistage polymerization of olefins.2. Polymer properties: bimodal polypropylene and linear low-density polyethylene
Ind. Eng. Chem. Res. Zhang 52 7240 2013 10.1021/ie302488v Equation-oriented optimization on an industrial high-density polyethylene slurry process with target molecular weight distribution
Ind. Eng. Chem. Res. Zheng 50 322 2011 10.1021/ie101699b Steady-state and dynamic modeling of the basell multireactor olefin polymerization process
Macromol. Chem. Phys. Zhao 215 1434 2014 10.1002/macp.201400204 Novel SiO2-supported silyl-chromate(Cr)/imido-vanadium(V) bimetallic catalysts producing polyethylene and ethylene /1-hexene copolymers with bimodal molecular-weight distribution
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.