다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Journal of the European Ceramic Society, v.36 no.1, 2016년, pp.227 - 234
Carlton, H.D. , Elmer, J.W. , Freeman, D.C. , Schaeffer, R.D. , Derkach, O. , Gallegos, G.F.
AI-Helper
A new method for notching ceramics was developed using a picosecond laser for fracture toughness testing of alumina samples. The test geometry incorporated a single-edge-V-notch that was notched using picosecond laser micromachining. This method has been used in the past for cutting ceramics, and is...
J. Am. Ceram. Soc. Munro 80 1919 1997 10.1111/j.1151-2916.1997.tb03074.x Evaluated material properties for a sintered alpha-alumina
Quinn 1989 Flexure Strength of Advanced Ceramics: A Round Robin Exercise, Rept. No. MTL TR 89-62
Adv. Mater. Launey 21 2103 2009 10.1002/adma.200803322 On the fracture toughness of advanced materials
ASTM C1421 - 10. Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature.
Quinn 846 2008 Proceedings of the 18th Annual Conference on Composites and Advanced Ceramic Materials-B: Ceramic Engineering and Science Proceedings Fracture toughness by the surface crack in flexure (SCF) method: results of the Vamas Round Robin
Tracy 836 2008 Proceedings of the 18th Annual Conference on Composites and Advanced Ceramic Materials-B: Ceramic Engineering and Science Proceedings Fracture toughness by the surface crack in flexure (SCF) method
J. Am. Ceram. Soc. Munz 63 300 1980 10.1111/j.1151-2916.1980.tb10725.x Fracture toughness determination of A12O3 using four-point-bend specimens with straight-through and chevron notches
Lawn 1993 Fracture of Brittle Solids
Mater. Res. Strecker 8 121 2005 10.1590/S1516-14392005000200004 Fracture toughness measurements of LPS-SiC: a comparison of the indentation technique and the SEVNB method
Ceram. Int. Gogotsi 33 315 2007 10.1016/j.ceramint.2005.09.017 Evaluation of fracture resistance of ceramics: edge fracture tests
J. Kubler Fracture Toughness of Ceramics using the SEVNB Method; Round Robin (Single-Edge-V-Notched Beam), VAMAS Report No.37 (1999).
Fatigue Fract. Eng. Mater. Primas 20 513 1997 10.1111/j.1460-2695.1997.tb00284.x ESIS TC 6 Round Robin on fracture toughness
Dent. Mater. Scherrer 14 246 1998 10.1016/S0109-5641(98)00032-3 Comparison of three fracture toughness testing techniques using a dental glass and a dental ceramic
J. Am. Ceram. Soc. Nishida 77 606 1994 10.1111/j.1151-2916.1994.tb07038.x Effect of Notch-Root radius on the fracture toughness of a fine-grained alumina
J. Eur. Ceram. Soc. Damani 16 695 1996 10.1016/0955-2219(95)00197-2 Critical notch-root radius effect in SENB-S fracture toughness testing
J. Appl. Phys. Perry 85 6803 1999 10.1063/1.370197 Ultrashort-pulse laser machining of dielectric materials
J. Eur. Ceram. Soc. Turon-Vinas 34 3865 2014 10.1016/j.jeurceramsoc.2014.05.009 Fracture toughness of zirconia from a shallow notch produced by ultra-short pulsed laser ablation
J. Nucl. Mater. Fett 184 39 1991 10.1016/0022-3115(91)90530-K Subcritical crack growth in high-grade alumina
Carbon Elmer 50 4114 2012 10.1016/j.carbon.2012.04.059 Direct patterning of vertically aligned carbon nanotube arrays to 20μm pitch using focused laser beam micromachining
J. Mater. Sci. Quinn 32 4331 1997 10.1023/A:1018671823059 Indentation brittleness of ceramics: a fresh approach
ASTM Standard C1161-90. Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature.
Annu. Rev. Mater. Sci. Kinney 22 121 1992 10.1146/annurev.ms.22.080192.001005 X-Ray tomographic microscopy (XTM) using synchrotron radiation
Nucl. Instrums. Methods Phys. Res. A Vlassenbroeck J 442 2007 10.1016/j.nima.2007.05.073 Software tools for quantification of x-ray microtomography at the ‘Center for X-ray Tomography’ at Ghent University
Avizo™ 3D visualization framework. Chelmsford, MA.: Mercury CS, 2008.
Mater. Chem. Phys. Tuan 36 246 1994 10.1016/0254-0584(94)90037-X The mechanical performance of alumina as a function of grain size
Opt. Laser Eng. Yilbas 55 35 2014 10.1016/j.optlaseng.2013.10.006 Laser cutting of rectangular geometry into alumina tiles
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.