참고문헌 (29)

1. A. R. Dowling, F. Peter, The development of structural integrity assessment methods: An overview in methods for the assessment of structural integrity components and structure. In: Lidbury D, Hirsh Mancy PJ, editors. London: 2003, pp.1-26. 

2. 10.1016/S0308-0161(98)00045-3 R. B. Nageswara, A.R. Acharya, Failure assessment on M300 grade maraging steel cylindrical stress vessels with an internal surface crack, Int. J. Pres. Ves. Pip. 75 (2010) 537-543. 

   상세보기

3. British Standard Institution, Guide on methods for assessing the acceptability of flaws in metallic structures. BS7910, 2013. 

4. British Energy, Assessment of the integrity of structures containing defects, R6, 2013. 

5. 10.1016/0308-0161(75)90014-9 A. R. Dowling, C.H. A. Townley, The effect of defect on structural failure: a two-criteria approach, Int. J. Pres. Ves. Pip. 3 (1975) 77-107. 

   상세보기

6. 10.1016/S0308-0161(03)00107-8 C. M. Davies, N.P. O’Dowd, D.W. Dean, K.M. Nikbin, R.A. Ainsworth, Failure assessment diagram analysis of creep crack initiation in 316H stainless steel, Int. J. Pres. Ves. Pip. 80 (2003) 541-551. 

   상세보기

7. 10.1016/j.ijpvp.2013.01.004 X. D. Qian, Failure assessment diagrams for circular hollow section X- and K-joints, Int. J. Pres. Ves. Pip. 104 (2013) 43-56. 

   상세보기

8. 10.1016/S0308-0161(98)00045-3 R. B. Nageswara, A.R. Acharya, Failure assessment on M300 grade maraging steel cylindrical stress vessels with an internal surface crack, Int. J. Pres. Ves. Pip. 75 (1998) 537-543. 

   상세보기

9. 10.1016/j.ijpvp.2006.04.004 S. Cravero, C. Ruggieri, Structural integrity analysis of axially cracked pipelines using conventional and constraint-based failure assessment diagrams, Int. J. Pres. Ves. Pip. 83 (2006) 607-617. 

   상세보기

10. 10.1016/S0013-7944(00)00074-6 R. A. Ainsworth, I. Sattari-Far, A.H. Sherry, D.G. Hooton, I. Hadley, Methods for including constraint effects within the SINTAP procedures, Eng. Fract. Mech. 76(2000) 563-571. 

    상세보기

11. 10.1016/0308-0161(95)98950-B M. Lennan, J.W. Hancock, Constraint-based failure assessment diagrams, Int. J. Pres. Ves. Pip. 64 (1995) 287-298. 

    상세보기

12. 10.1016/j.engfracmech.2010.02.026 S. Cicero, R.A. Ainsworth, F. Gutierrez-Solana, A Engineering approaches for the assessment of low constraint fracture conditions: A critical review, Eng. Fract. Mech. 77 (2010) 1360-1374. 

    상세보기

13. 10.1016/j.engfracmech.2004.12.009 A. H. Sherry, M.A. Wilkes, D.W. Beardsmore, D.P. G. Lidbury, Material constraint parameters for the assessment of shallow defects in structural components-Part I: Parameter solutions, Eng. Fract. Mech. 72 (2005) 2373-2395. 

    상세보기

14. 10.1016/j.engfracmech.2004.12.010 A. H. Sherry, D.G. Hooton, D.W. Beardsmore, D.P. G. Lidbury, Material constraint parameters for the assessment of shallow defects in structural components. Part II: Constraint-based assessment of shallow defects, Eng. Fract. Mech. 72 (2005) 2396-2415. 

    상세보기

15. 10.1520/STP18024S M. T. Kirk, K.C. Koppenhoefer and F. C. Shih, Effect of constraint on specimen dimensions needed to obtain structurally relevant toughness measures. Constraint Effects in Fracture, Philadelphia: ASTM STP 1171, American Society for Testing and Materials; 1993, p.79-103. 

    

16. 10.1016/S0013-7944(00)00112-0 J. R. Donoso, F. Labbe, Q-stresses and constraint behavior of the notched cylindrical tensile specimen, Eng. Fract. Mech. 68 (2001) 487-496. 

    상세보기

17. 10.1016/0022-5096(68)90014-8 J. W. Hutchinson, Singular behaviour at the end of a tensile crack in a hardening material, J. Mech. Phys. Solids 16 (1968) 13-31. 

    상세보기

18. 10.1016/0022-5096(68)90013-6 J. R. Rice, G.F. Rosengren, Plane strain deformation near a crack tip in a power-law hardening material, J. Mech. Phys. Solids 16 (1968) 1-12. 

    상세보기

19. 10.1016/0022-5096(91)90029-N M. Al-Ani, J.W. Hancock, J-dominance of short cracks in tension and bending, J. Mech. Phys. Solids 39 (1991) 23-43. 

    상세보기

20. 10.1016/0022-5096(91)90049-T N. P. O’Dowd, C.F. Shih, Family of crack-tip characterized by a triaxiality parameter - I. Structure of fields, J. Mech. Phys. Solids 39 (1991) 989-1015. 

    상세보기

21. 10.1016/0022-5096(92)90057-9 N. P. O’Dowd, C.F. Shih, Family of crack-tip characterized by a triaxiality parameter - II. Fracture applications. J. Mech. Phys. Solids 40 (1992) 939-963. 

    상세보기

22. 10.1016/0308-0161(95)98949-7 R. A. Ainsworth, A constraint-based failure assessment diagram for fracture assessment, Int. J. Pres. Ves. Pip. 64 (1995) 277-285. 

    상세보기

23. 10.1115/1.2842121 R. A. Ainsworth, N.P. O’Dowd, Constraint in the failure assessment diagram approach for fracture assessment, J. Appl. Mech. 117 (1995) 260-267. 

    상세보기

24. J. D. G. Sumpter and J. W. Hancock, Status of the J Plus T Stress, in Proceedings of the 10th European Conference on Fracture. K-H Schwalbe and C Bergers, editors. EMAS, Warley, UK: 1994, pp. 617-626. 

25. 10.1016/S0022-5096(97)00068-9 Y. Huang, W. Brocks, Quantification of constraint effects in elastic-plastic crack front fields, J. Mech. Phys. Solids 46 (1998) 219-241. 

    상세보기

26. 10.1007/BF00018498 Y. J. Kim, G. Lin, A. Cornec, K.H. Schwalbe, Fully plastic crack-tip fields for plane strain shallow-cracked specimens under pure bending, Int. J. Fracture 78 (1996) 21-34. 

    상세보기

27. 10.1016/S0013-7944(03)00169-3 A. Neimitz, I. Dzioba, J. Ga kiewicz, R. Molasy, A study of stable crack growth using experimental methods, finite elements and fractography, Eng. Fract. Mech. 71 (2004) 1325-1355. 

    상세보기

28. 10.1016/j.ijpvp.2015.09.001 H. J. JIN, S.J. WU, Effect of plasticity constraint on structural integrity assessment of pressure vessel welds, Int. J. Pres. Ves. Pip. (2015) http://dx.doi.org/10.1016/j.ijpvp.2015.09.001 (accept). 

    상세보기

29. J. Lu, M.R. James, Handbook of Measurement of Residual Stresses. Fairmount Press, Lilburn, GA, 1996.