최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Procedia engineering, v.130, 2015년, pp.835 - 844
Peng, W.Y. , Jin, H.J. , Wu, S.J.
In this study, four assessment procedures were used for the integrity analysis of the cracked Al alloy pressure vessel welds (PVWs), and the four methods are (1) to use BS 7910 Option 1 that is a conventional procedure, (2) to involve a modification to the FAD but retain the definition of Kr, (3) to...
A. R. Dowling, F. Peter, The development of structural integrity assessment methods: An overview in methods for the assessment of structural integrity components and structure. In: Lidbury D, Hirsh Mancy PJ, editors. London: 2003, pp.1-26.
10.1016/S0308-0161(98)00045-3 R. B. Nageswara, A.R. Acharya, Failure assessment on M300 grade maraging steel cylindrical stress vessels with an internal surface crack, Int. J. Pres. Ves. Pip. 75 (2010) 537-543.
British Standard Institution, Guide on methods for assessing the acceptability of flaws in metallic structures. BS7910, 2013.
British Energy, Assessment of the integrity of structures containing defects, R6, 2013.
10.1016/0308-0161(75)90014-9 A. R. Dowling, C.H. A. Townley, The effect of defect on structural failure: a two-criteria approach, Int. J. Pres. Ves. Pip. 3 (1975) 77-107.
10.1016/S0308-0161(03)00107-8 C. M. Davies, N.P. O’Dowd, D.W. Dean, K.M. Nikbin, R.A. Ainsworth, Failure assessment diagram analysis of creep crack initiation in 316H stainless steel, Int. J. Pres. Ves. Pip. 80 (2003) 541-551.
10.1016/j.ijpvp.2013.01.004 X. D. Qian, Failure assessment diagrams for circular hollow section X- and K-joints, Int. J. Pres. Ves. Pip. 104 (2013) 43-56.
10.1016/S0308-0161(98)00045-3 R. B. Nageswara, A.R. Acharya, Failure assessment on M300 grade maraging steel cylindrical stress vessels with an internal surface crack, Int. J. Pres. Ves. Pip. 75 (1998) 537-543.
10.1016/j.ijpvp.2006.04.004 S. Cravero, C. Ruggieri, Structural integrity analysis of axially cracked pipelines using conventional and constraint-based failure assessment diagrams, Int. J. Pres. Ves. Pip. 83 (2006) 607-617.
10.1016/S0013-7944(00)00074-6 R. A. Ainsworth, I. Sattari-Far, A.H. Sherry, D.G. Hooton, I. Hadley, Methods for including constraint effects within the SINTAP procedures, Eng. Fract. Mech. 76(2000) 563-571.
10.1016/0308-0161(95)98950-B M. Lennan, J.W. Hancock, Constraint-based failure assessment diagrams, Int. J. Pres. Ves. Pip. 64 (1995) 287-298.
10.1016/j.engfracmech.2010.02.026 S. Cicero, R.A. Ainsworth, F. Gutierrez-Solana, A Engineering approaches for the assessment of low constraint fracture conditions: A critical review, Eng. Fract. Mech. 77 (2010) 1360-1374.
10.1016/j.engfracmech.2004.12.009 A. H. Sherry, M.A. Wilkes, D.W. Beardsmore, D.P. G. Lidbury, Material constraint parameters for the assessment of shallow defects in structural components-Part I: Parameter solutions, Eng. Fract. Mech. 72 (2005) 2373-2395.
10.1016/j.engfracmech.2004.12.010 A. H. Sherry, D.G. Hooton, D.W. Beardsmore, D.P. G. Lidbury, Material constraint parameters for the assessment of shallow defects in structural components. Part II: Constraint-based assessment of shallow defects, Eng. Fract. Mech. 72 (2005) 2396-2415.
10.1016/S0013-7944(00)00112-0 J. R. Donoso, F. Labbe, Q-stresses and constraint behavior of the notched cylindrical tensile specimen, Eng. Fract. Mech. 68 (2001) 487-496.
10.1016/0022-5096(68)90014-8 J. W. Hutchinson, Singular behaviour at the end of a tensile crack in a hardening material, J. Mech. Phys. Solids 16 (1968) 13-31.
10.1016/0022-5096(68)90013-6 J. R. Rice, G.F. Rosengren, Plane strain deformation near a crack tip in a power-law hardening material, J. Mech. Phys. Solids 16 (1968) 1-12.
10.1016/0022-5096(91)90029-N M. Al-Ani, J.W. Hancock, J-dominance of short cracks in tension and bending, J. Mech. Phys. Solids 39 (1991) 23-43.
10.1016/0022-5096(91)90049-T N. P. O’Dowd, C.F. Shih, Family of crack-tip characterized by a triaxiality parameter - I. Structure of fields, J. Mech. Phys. Solids 39 (1991) 989-1015.
10.1016/0022-5096(92)90057-9 N. P. O’Dowd, C.F. Shih, Family of crack-tip characterized by a triaxiality parameter - II. Fracture applications. J. Mech. Phys. Solids 40 (1992) 939-963.
10.1016/0308-0161(95)98949-7 R. A. Ainsworth, A constraint-based failure assessment diagram for fracture assessment, Int. J. Pres. Ves. Pip. 64 (1995) 277-285.
10.1115/1.2842121 R. A. Ainsworth, N.P. O’Dowd, Constraint in the failure assessment diagram approach for fracture assessment, J. Appl. Mech. 117 (1995) 260-267.
J. D. G. Sumpter and J. W. Hancock, Status of the J Plus T Stress, in Proceedings of the 10th European Conference on Fracture. K-H Schwalbe and C Bergers, editors. EMAS, Warley, UK: 1994, pp. 617-626.
10.1016/S0022-5096(97)00068-9 Y. Huang, W. Brocks, Quantification of constraint effects in elastic-plastic crack front fields, J. Mech. Phys. Solids 46 (1998) 219-241.
10.1007/BF00018498 Y. J. Kim, G. Lin, A. Cornec, K.H. Schwalbe, Fully plastic crack-tip fields for plane strain shallow-cracked specimens under pure bending, Int. J. Fracture 78 (1996) 21-34.
10.1016/S0013-7944(03)00169-3 A. Neimitz, I. Dzioba, J. Ga kiewicz, R. Molasy, A study of stable crack growth using experimental methods, finite elements and fractography, Eng. Fract. Mech. 71 (2004) 1325-1355.
10.1016/j.ijpvp.2015.09.001 H. J. JIN, S.J. WU, Effect of plasticity constraint on structural integrity assessment of pressure vessel welds, Int. J. Pres. Ves. Pip. (2015) http://dx.doi.org/10.1016/j.ijpvp.2015.09.001 (accept).
J. Lu, M.R. James, Handbook of Measurement of Residual Stresses. Fairmount Press, Lilburn, GA, 1996.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.