참고문헌 (16)

1. Appl. Energy R. T. Doucette 88 7 2315 2011 10.1016/j.apenergy.2011.01.045 R. T. Doucette and M. D. McCulloch, Modeling the prospects of plug-in hybrid electric vehicles to reduce CO2 emissions, Appl. Energy, 88 (7) (2011) 2315-2323. 

   상세보기

2. Appl. Energy Y. Y. Hsu 87 11 3546 2010 10.1016/j.apenergy.2010.06.008 Y. Y. Hsu and S. Y. Lu, Design and implementation of a hybrid electric motorcycle management system, Appl. Energy, 87 (11) (2010) 3546-3551. 

   상세보기

3. Appl. Energy S. Eriksson 88 1 265 2011 10.1016/j.apenergy.2010.06.010 S. Eriksson and H. Bernhoff, Loss evaluation and design optimization for direct driven permanent magnet synchronous generators for wind power, Appl. Energy, 88 (1) (2011) 265-271. 

   상세보기

4. Appl. Energy M. Moya 88 12 4424 2011 10.1016/j.apenergy.2011.05.021 M. Moya, J. C. Bruno, P. Eguia, E. Torres, I. Zamora and A. Coronas, performance analysis of a trigeneration system based on a micro gas turbine and an air-cooled, indirect fired, ammonia-water absorption chiller, Appl. Energy, 88 (12) (2011) 4424-4440. 

   상세보기

5. ASME J. Eng. Gas Turbines Power S. Howard 131 2 022501 2009 10.1115/1.2966392 S. Howard, Misalignment in gas foil journal bearings: an experimental study, ASME J. Eng. Gas Turbines Power, 131 (2) (2009) 022501. 

   상세보기

6. ASME J. Lubr. Technol. H. Heshmat 105 4 647 1983 10.1115/1.3254697 H. Heshmat, J. A. Walowit and O. Pinkus, Analysis of gaslubricated foil journal bearings, ASME J. Lubr. Technol., 105 (4) (1983) 647-655. 

   상세보기

7. STLE Tribol. Trans. J. P. Peng 37 1 91 1994 10.1080/10402009408983270 J. P. Peng and M. Carpino, Coulomb friction damping effects in elastically supported gas foil bearings, STLE Tribol. Trans., 37 (1) (1994) 91-98. 

   상세보기

8. ASME J. Tribol. Z.-C. Peng 128 534 2006 10.1115/1.2197526 Z.-C. Peng and M. M. Khonsari, A thermohydrodynamic analysis of foil journal bearings, ASME J. Tribol., 128 (2006) 534-540. 

   상세보기

9. ASME J. Eng. Gas Turbines Power L. San Andrés 132 4 042504 2010 10.1115/1.3159386 L. San Andrés and T. H. Kim, Thermohydrodynamic analysis of bump type gas foil bearings: a model anchored to test data, ASME J. Eng. Gas Turbines Power, 132 (4) (2010) 042504. 

   상세보기

10. Tribol. Intl. K. Sim 48 137 2012 10.1016/j.triboint.2011.11.017 K. Sim and T. H. Kim, Thermohydrodynamic analysis of bump-type gas foil bearings using bump thermal contact and inlet flow mixing models, Tribol. Intl., 48 (2012) 137-148. 

    상세보기

11. K. Sim 2015 Submitted to J. Mech. Sci. Technol. K. Sim S.-M. Jang, Y.-B. Lee and T. H. Kim, Thermal analysis of high speed permanent magnet motor supported on gas foil bearings: Part I-Coupled thermal and loss modeling, Submitted to J. Mech. Sci. Technol. (2015). 

12. Y. B. Lee 420 2010 Proc. IFToMM Int. Conf. on Rotordynamics Y. B. Lee, S. B. Cho, T. Y. Kim, C. H. Kim and T. H. Kim, Rotordynamic performance measurement of an oil-free turbocompressor supported on gas foil bearings, Proc. IFToMM Int. Conf. on Rotordynamics, Seoul, Korea (2010) 420-426. 

13. Tribol. Intl. L. S. Andrés 42 1 111 2009 10.1016/j.triboint.2008.05.003 L. S. Andrés and T. H. Kim, Analysis of gas foil bearings integrating fe top foil models, Tribol. Intl., 42 (1) (2009) 111-120. 

    상세보기

14. Tribol. Intl. D.-J. Park 41 282 2008 10.1016/j.triboint.2007.08.001 D.-J. Park, C.-H. Kim, G.-H. Jang and Y.-B. Lee, Theoretical considerations of static and dynamic characteristics of air foil thrust bearing with tilt and slip flow, Tribol. Intl., 41 (2008) 282-295. 

    상세보기

15. ASME J. Tribol. M. Salei 123 3 566 2001 10.1115/1.1308038 M. Salei, E. Swanson and H. Heshmat, Thermal features of compliant foil bearings -theory and experiments, ASME J. Tribol., 123 (3) (2001) 566-571. 

    상세보기

16. ASME J. Eng. Gas Turbines Power T. H. Kim 134 2 024501 2012 10.1115/1.4004401 T. H. Kim, J. W. Song, Y. B. Lee and K. Sim, Thermal performance measurement of a bump type gas foil bearing floating on a hollow shaft for increasing rotating speed and static load, ASME J. Eng. Gas Turbines Power, 134 (2) (2012) 024501. 

    상세보기