참고문헌 (22)

1. Exp. Therm. Fluid Sci. Tadrist 28 193 2004 10.1016/S0894-1777(03)00039-6 About the use of fibrous materials in compact heat exchangers 

   상세보기

2. ASME J. Heat Transfer Calmidi 122 3 557 2000 10.1115/1.1287793 Forced convection in high porosity metal foams 

   상세보기

3. J. ASME J. Heat Transfer Mancin 133 6 2011 Heat transfer performance of aluminum foams 

4. Exp. Therm. Fluid Sci. Mancin 36 224 2012 10.1016/j.expthermflusci.2011.09.016 Experimental air heat transfer and pressure drop through copper foams 

   상세보기

5. Int. J. Heat Mass Transfer Lu 49 2751 2006 10.1016/j.ijheatmasstransfer.2005.12.012 Thermal analysis on metal-foam filled heat exchangers. Part I: metal-foam filled pipes 

   상세보기

6. Int. J. Heat Mass Transfer Zhao 49 2762 2006 10.1016/j.ijheatmasstransfer.2005.12.014 Thermal analysis on metal-foam filled heat exchangers. Part II: tube heat exchangers 

   상세보기

7. J. Heat Transfer Kim 122 3 572 2000 10.1115/1.1287170 Flow and heat transfer correlations for porous fin in a plate-fin heat exchanger 

   상세보기

8. Appl. Therm. Eng. Ranut 69 230 2014 10.1016/j.applthermaleng.2013.11.056 High resolution microtomography-based CFD simulation of flow and heat transfer in aluminum metal foams 

   상세보기

9. Exp. Therm. Fluid Sci. Ranut 67 30 2015 10.1016/j.expthermflusci.2014.10.018 High resolution X-ray microtomography-based CFD simulation for the characterization of flow permeability and effective thermal conductivity of aluminum metal foams 

   상세보기

10. Int. J. Multiphase Flow Diani 76 111 2015 10.1016/j.ijmultiphaseflow.2015.07.003 Low-GWP refrigerants flow boiling heat transfer in a 5 PPI copper foam 

    상세보기

11. Int. J. Heat Mass Transfer Mancin 74 77 2014 10.1016/j.ijheatmasstransfer.2014.02.070 R134a and R1234ze(E) liquid and flow boiling heat transfer in a high porosity copper foam 

    상세보기

12. Int. J. Refrig. Zhu 34 509 2011 10.1016/j.ijrefrig.2010.10.006 Influence of oil on nucleate pool boiling heat transfer of refrigerant on metal foam covers 

    상세보기

13. Appl. Therm. Eng. Hu 62 433 2014 10.1016/j.applthermaleng.2013.09.051 Effect of tube diameter on pressure drop characteristics of refrigerant-oil mixture flow boiling inside metal-foam filled tubes 

    상세보기

14. Int. J. Heat Mass Transfer Zhu 91 446 2015 10.1016/j.ijheatmasstransfer.2015.07.096 Flow boiling of refrigerant in horizontal metal-foam filled tubes: part 1 - two-phase flow pattern visualization 

    상세보기

15. Int. J. Heat Mass Transfer Zhu 91 502 2015 10.1016/j.ijheatmasstransfer.2015.07.099 Flow boiling of refrigerant in horizontal metal-foam filled tubes: part 2 - a flow-pattern based prediction method for heat transfer 

    상세보기

16. 10.1016/j.ijheatmasstransfer.2016.03.042 G.B. Abadi, C. Moon, K.C. Kim, Flow boiling visualization and heat transfer in metal-foam-filled mini tubes - Part II: Developing predictive methods for heat transfer coefficient and pressure drop, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2016.03.042. 

    상세보기

17. Energy Abadi 93 2363 2015 10.1016/j.energy.2015.10.092 Experimental study of a 1 kW organic Rankine cycle with a zeotropic mixture of R245fa/R134a 

    상세보기

18. Exp. Therm. Fluid Sci. Abadi 72 112 2016 10.1016/j.expthermflusci.2015.11.006 Flow boiling characteristics of R134a and R245fa mixtures in a vertical circular tube 

    상세보기

19. Appl. Therm. Eng. Abadi 2016 Thermal performance of a 10-kW phase-change plate heat exchanger with metal foam filled channels 

20. ASME J. Fluids Eng. Moffat 107 2 173 1985 10.1115/1.3242452 Using uncertainty analysis in the planning of an experiment 

    상세보기

21. Int. J. Heat Mass Transfer Wojtan 48 2955 2005 10.1016/j.ijheatmasstransfer.2004.12.012 Investigation of flow boiling in horizontal tubes: part I - a new diabatic two-phase flow pattern map 

    상세보기

22. Int. Chem. Eng. Gnielinski 16 2 359 1976 New equations for heat and mass transfer in turbulent pipe and channel flow