참고문헌 (16)

1. J. Mater. Sci. M. Okayasu 47 241 2012 10.1007/s10853-011-5791-2 M. Okayasu, S. Takasu and M. Mizuno, Relevance of instrumented nano-indentation for the assessment of the mechanical properties of eutectic crystals and a-Al grain in cast aluminum alloys, J. Mater. Sci., 47 (2012) 241-250. 

   상세보기

2. Matell. Mater. Trans. A M. Zarif 42A 1684 2011 10.1007/s11661-010-0553-3 M. Zarif, B. Mckay and P. Schumacher, Study of heterogeneous nucleation of eutectic Si in high-purity Al-Si alloys with Sr addition, Matell. Mater. Trans. A, 42A (2011) 1684-1691. 

   상세보기

3. U.S. Patent No.1 A. Pacz 387 900 1921 A. Pacz, U.S. Patent No.1, 387 900 (1921). 

4. Mater. Sci. Eng. A Z. Yin 280 151 2000 10.1016/S0921-5093(99)00682-6 Z. Yin, Q. Pan, Y. Zhang and F. Jiang, Effect of minor Sc and Zr on the microstructure and mechanical properties of Al-Mg based alloys, Mater. Sci. Eng. A, 280 (2000) 151-155. 

   상세보기

5. Metall. Mater. Trans. A C. M. Dinnis 35 3531 2004 10.1007/s11661-004-0190-9 C. M. Dinnis, M. O. Otte, A. K. Dahle and J. A. Taylor, The influence of strontium on porosity formation in Al-Si alloys, Metall. Mater. Trans. A, 35 (2004) 3531-3541. 

   상세보기

6. Mater. Trans. JIM H. Nalae 33 1051 1992 10.2320/matertrans1989.33.1051 H. Nalae, K. Song and H. Fujii, New application of unidirectional solidification method for observation of interfacial morphology, Mater. Trans. JIM, 33 (1992) 1051-1056. 

   상세보기

7. J. Mater. Sci. J. Chang 33 5015 1998 10.1023/A:1004463125340 J. Chang, I. Moon and C. Choi, Refinement of cast microstructure of hypereutectic Al-Si alloys through the addition of rare earth metals, J. Mater. Sci., 33 (1998) 5015-5023. 

   상세보기

8. Therm. Acta. S. Farahany 584 72 2014 10.1016/j.tca.2014.04.001 S. Farahany, M. H. Idris and A. Ourdjini, Evaluations of antimony and strontium interaction in an Al-Si-Cu-Zn die cast alloy, Therm. Acta., 584 (2014) 72-78. 

   상세보기

9. Mater. Des. Y. Chen 64 423 2014 10.1016/j.matdes.2014.07.068 Y. Chen, Y. Pan, T. Lu, S. Tao and J. Wu, Effects of combinative addition of lanthanum and boron on grain refinement of Al-Si casting alloys, Mater. Des., 64 (2014) 423-426. 

   상세보기

10. Mater. Sci. T. H. Soda 11 1169 1995 10.1179/mst.1995.11.11.1169 H. Soda, G. Motoyasu, A. Mclean, C. K. Jen and O. Lisbôa, Method for continuous casting of metal wire and tube containing optical fibre, Mater. Sci. T., 11 (1995) 1169-1173. 

    상세보기

11. Metals M. Okayasu 5 1440 2015 10.3390/met5031440 M. Okayasu, Y. Miyamoto and K. Morinaka, Material properties of various cast aluminum alloys made using a heated mold continuous casting technique with and without ultrasonic vibration, Metals, 5 (2015) 1440-1453. 

    상세보기

12. Mater. Sci. Eng. A M. Okayasu 592 189 2014 10.1016/j.msea.2013.10.098 M. Okayasu, K. Ota, S. Takeuchi, H. Ohfuji and T. Shiraishi, Influence of microstructural characteristics on mechanical properties of ADC12 aluminum alloy, Mater. Sci. Eng. A, 592 (2014) 189-200. 

    상세보기

13. A. Ohno 113 1987 10.1007/978-3-642-95537-2 Solidification A. Ohno, Solidification, 1st ed., Springer, Germany (1987) 113-118. 

    

14. Thermochimica Acta. S. Farahany 559 59 2013 10.1016/j.tca.2013.02.024 S. Farahany, A. Ourdjini, M. H. Idrsi and S. G. Shabestari, Evaluation of the effect of Bi, Sb, Sr and cooling condition on eutectic phases in an Al-Si-Cu alloy (ADC12) by in situ thermal analysis, Thermochimica Acta., 559 (2013) 59-68. 

    상세보기

15. J. Mater. Sci. Technol. W. Eidhed 24 29 2008 W. Eidhed, Effects of solution treatment time and Srmodification on microstructure and mechanical property of Al-Si piston alloy, J. Mater. Sci. Technol., 24 (2008) 29-32. 

16. J. Mater. Sci. S. Khan 28 5957 1993 10.1007/BF00365208 S. Khan, A. Ourdjini, Q. S. Hamed, M. A. A. Najafabadi and R. Elliott, Hardness and mechanical property relationships in directionally solidified aluminum-silicon eutectic alloys with different silicon morphologies, J. Mater. Sci., 28 (1993) 5957-5962. 

    상세보기