최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Robotics and computer-integrated manufacturing, v.41, 2016년, pp.92 - 101
Boschetto, A. , Bottini, L. , Veniali, F.
Fused Deposition Modeling is a filament extrusion-base Additive Manufacturing process that integrates Computer Aided Design system, material science, Computer Numerical Control and the extrusion process to fabricate physical parts without geometrical limitations. Notwithstanding the wide industrial ...
Gibson 2010 Additive Manufacturing Technologies, Rapid Prototyping to Direct Digital Manufacturing
Hopkinson 2005 Rapid Manufacturing: An Industrial Revolution for the Digital Age
Chua 2010 Rapid Prototyping: Principles and Applications
Masood 69 2014 Comprehensive Materials Processing Advances in fused deposition modeling
Boschetto 249 2014 Surface Engineering Techniques and Applications: Research Advancements Surface characterization of fused deposition modeling
B. Vasudevarao, D.P. Natarajan, M. Henderson, A. Razdan. Sensitivity of RP surface finish to process parameter variation, in: Proceedings of the Solid Free Form Fabrication Symposium, Austin, 2000, p. 252-258.
Int. J Mach. Tools Manuf. Ahn 47 3-4 593 2007 10.1016/j.ijmachtools.2006.05.004 Fabrication direction optimization to minimize post-machining in layered manufacturing
J. Mater. Process. Technol. Anitha 118 385 2001 10.1016/S0924-0136(01)00980-3 Critical parameters influencing the quality of prototypes in fused deposition modelling
J Mater. Process. Technol. Pandey 1 1-3 323 2003 10.1016/S0924-0136(02)00953-6 Improvement of surface finish by staircase machining in fused deposition modelling
J. Mater. Process. Technol. Ahn 209 664 2009 10.1016/j.jmatprotec.2008.02.050 Surface roughness prediction using measured data and interpolation in layered manufacturing
Comput. Aided Des. Campbell 34 717 2002 10.1016/S0010-4485(01)00201-9 Surface roughness visualization for rapid prototyping models
Rapid Prototyp. J. Armillotta 12 1 35 2006 10.1108/13552540610637255 Assessment of surface quality on textured FDM prototypes
Int. J. Adv. Manuf. Technol. Boschetto 61 9-12 945 2011 Modelling micro geometrical profile in fused deposition process
Rapid Prototyp. J. Boschetto 19 4 240 2013 10.1108/13552541311323254 3D roughness profile model in fused deposition modelling
Int. J. Adv. Manuf. Technol. Boschetto 67 9-12 2727 2013 10.1007/s00170-012-4687-x Surface roughness prediction in fused deposition modelling by neural networks
CIRP Ann. Ippolito 44 1 157 1995 10.1016/S0007-8506(07)62296-3 A benchmarking of rapid prototyping techniques in terms of dimensional accuracy and surface finish
Rapid Prototyp. J. Mahesh 10 2 123 2004 10.1108/13552540410526999 Benchmarking for comparative evaluation of RP systems and processes
Rapid Prototyp. J. El-Katatny 16 1 36 2010 10.1108/13552541011011695 Error analysis of FDM fabricated medical replicas
Rapid Prototyp. .J Singh 19 1 58 2013 10.1108/13552541311292745 Some investigations for small-sized product fabrication with FDM for plastic components
Mater. Des. Sood 30 10 4243 2009 10.1016/j.matdes.2009.04.030 Improving dimensional accuracy of fused deposition modelling processed part using grey Taguchi method
Rapid Prototyp. J. Tong 14 1 4 2008 10.1108/13552540810841517 Amine error compensation for fused deposition modeling (FDM) machine by correcting slice files
Int. J. Manuf. Technol. Manag. Kumar 14 1-2 228 2008 10.1504/IJMTM.2008.017497 A robust process optimisation for fused deposition modelling
Int. J. Adv. Manuf. Technol. Chang 53 9-12 1027 2011 10.1007/s00170-010-2882-1 Studies on profile error and extruding aperture for the RP parts using the fused deposition modeling process
Int. J. Prod. Qual. Manag. Equbal 7 1 22 2001 Prediction of dimensional accuracy in fused deposition modelling: a fuzzy logic approach
Int. J. Adv. Manuf. Technol. Boschetto 73 913 2014 10.1007/s00170-014-5886-4 Accuracy prediction in fused deposition modeling
CIRP Ann. Manuf. Technol. Galantucci 58 1 189 2009 10.1016/j.cirp.2009.03.071 Experimental study aiming to enhance the surface finish of fused deposition modeled parts
J. Mater. Process. Technol. McCullough 213 947 2013 10.1016/j.jmatprotec.2012.12.015 Surface modification of fused deposition modelling ABS to enable rapid prototyping of biomedical microdevices
J. Mater. Process. Technol. Boschetto 219 181 2015 10.1016/j.jmatprotec.2014.12.021 Roughness prediction in coupled operations of fused deposition modeling and barrel finishing
Rapid Prototyp. J Kerbrat 16 1 63 2010 10.1108/13552541011011721 Manufacturability analysis to combine additive and subtractive processes
Comput. Ind. Kerbrat 62 7 684 2011 10.1016/j.compind.2011.04.003 A new DFM approach to combine machining and additive manufacturing
J. Manuf. Process. Zhu 15 4 404 2013 10.1016/j.jmapro.2013.06.006 The development of a novel process planning algorithm for an unconstrained hybrid manufacturing process
Robot. Comput. Integr. Manuf. Karunakaran 26 5 490 2010 10.1016/j.rcim.2010.03.008 Low cost integration of additive and subtractive processes for hybrid layered manufacturing
Comput. Aided Des. Hur 34 741 2002 10.1016/S0010-4485(01)00203-2 Hybrid rapid prototyping system using machining and deposition
J. Manuf. Sci. E-T ASME Kulkarni 122 100 2000 10.1115/1.538891 On the integration of layered manufacturing and material removal processes
J. Mater. Process. Technol. Lee 214 11 2366 2014 10.1016/j.jmatprotec.2014.05.004 Development of a hybrid rapid prototyping system using low-cost fused deposition modeling and five-axis machining
J. Mater. Process. Technol. Alauddin 54 40 1995 10.1016/0924-0136(95)01917-0 Plastics and their machining: a review
Int. J. Mech. Sci. Xiao 44 2317 2002 10.1016/S0020-7403(02)00178-9 The role of viscous deformation in the machining of polymers
Sustain. Constr. Des. Keresztes 106 2011 Machinability of engineering polymers
Machining guidelines for semi-finished plastics, 〈www.ensinger-online.com〉, 2010.
Rapid Prototyp. J. Rodriguez 6 3 175 2000 10.1108/13552540010337056 Characterization of the mesostructure of fused-deposition acrylonitrile-butadiene styrene materials
J. Mater. Process. Technol. Ahn 209 5593 2009 10.1016/j.jmatprotec.2009.05.016 Representation of surface roughness in fused deposition modeling
Int. J. Adv. Manuf. Technol. Chang 53 1027 2011 10.1007/s00170-010-2882-1 Studies on profile error and extruding aperture for the RP parts using the fused deposition modeling process
Int. J. Adv. Manuf. Technol. Boschetto 80 99 2015 10.1007/s00170-015-6992-7 Triangular mesh offset aiming to enhance Fused Deposition Modeling accuracy
ISO 4287, Geometrical product specifications (GPS) - surface texture: profile method-terms, definitions and surface texture parameters, Technical Report ISO, 1997, p. 1-25.
ISO 4288, Geometrical Product Specifications (GPS) - Surface texture: Profile method -- Rules and procedures for the assessment of surface texture, Technical Report ISO, 1997, p. 1-8.
ISO 16610-21, Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters, Technical Report ISO, 2011, p. 1-23.
A.R. Wallace, H.W. Whittington, Performance Prediction of Standardized Impulse Turbines for Micro Hydro, Elsevier B.V. Sutton., International. Water Power & Dam Construction, U.K., 2008.
Renew. Sustain. Energy Rev. Elbatran 43 40 2015 10.1016/j.rser.2014.11.045 Operation, performance and economic analysis of low head micro-hydropower turbines for rural and remote areas: a review
Energy Barelli 58 695 2013 10.1016/j.energy.2013.06.038 Mini-hydro: a design approach in case of torrential rivers
Energy Procedia Takagi 61 1593 2014 10.1016/j.egypro.2014.12.179
Z. Hussian, M. Abdullah, Z. Alimuddin, Pelton Turbine, in: Basic Fluid Mechanics and Hydraulic Machines, BS Publication, Hyderabad, 2009, pp. 99-126.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.