최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of materials processing technology, v.240, 2017년, pp.233 - 239
Jin, Y. , Wan, Y. , Zhang, B. , Liu, Z.
Fused deposition modeling has become one of the most diffused rapid prototyping techniques, which is widely used to fabricate prototypes. However, further application of this technology is severely affected by poor surface roughness primarily due to staircase effect. It is necessary to adopt post-tr...
Rapid Prototyp. J. Ahn 8 248 2002 10.1108/13552540210441166 Anisotropic material properties of fused deposition modeling ABS
J. Mater. Process. Technol. Ahn 209 664 2009 10.1016/j.jmatprotec.2008.02.050 Surface roughness prediction using measured data and interpolation in layered manufacturing
J. Mater. Process. Technol. Ahn 209 5593 2009 10.1016/j.jmatprotec.2009.05.016 Representation of surface roughness in fused deposition modeling
J. Zhejiang Univ. Sci. A Bakar 11 972 2010 10.1631/jzus.A1001365 Analysis on fused deposition modelling performance
Rapid Prototyp. J. Boschetto 21 686 2015 10.1108/RPJ-10-2013-0105 Surface improvement of fused deposition modeling parts by barrel finishing
Int. J. Adv. Manuf. Technol. Boschetto 61 945 2012 10.1007/s00170-011-3744-1 Modelling micro geometrical profiles in fused deposition process
Rapid Prototyp. J. Boschetto 19 240 2013 10.1108/13552541311323254 3D roughness profile model in fused deposition modelling
CIRP Ann. - Manuf. Technol. Galantucci 58 189 2009 10.1016/j.cirp.2009.03.071 Experimental study aiming to enhance the surface finish of fused deposition modeled parts
CIRP Ann. - Manuf. Technol. Galantucci 59 247 2010 10.1016/j.cirp.2010.03.074 Quantitative analysis of a chemical treatment to reduce roughness of parts fabricated using fused deposition modeling
J. Intell. Manuf. Garg 1 2015 Laser power based surface characteristics models for 3-d printing process
Int. J. Adv. Manuf. Technol. Garg 86 603 2015 10.1007/s00170-015-8162-3 Energy component in the density of selective laser melting fabricated prototype
Int. J. Adv. Manuf. Technol. Garg 80 555 2015 10.1007/s00170-015-6989-2 A new computational intelligence approach in formulation of functional relationship of open porosity of the additive manufacturing process
Mater. Manuf. Process. Garg 31 522 2016 10.1080/10426914.2015.1070425 On surface finish and dimensional accuracy of FDM parts after cold vapor treatment
Rapid Prototyp. J. Ivanova 19 353 2013 10.1108/RPJ-12-2011-0127 Additive manufacturing (AM) and nanotechnology: promises and challenges
J. Mater. Res. Kasuga 14 418 1999 10.1557/JMR.1999.0060 Preparation of polylactic acid composites containing beta-Ca(PO3)(2) fibers
Int. J. Adv. Manuf. Technol. Mahapatra 60 1223 2012 10.1007/s00170-011-3675-x Bayesian regularization-based Levenberg-Marquardt neural model combined with BFOA for improving surface finish of FDM processed part
J. Mater. Process. Technol. Pandey 132 323 2003 10.1016/S0924-0136(02)00953-6 Improvement of surface finish by staircase machining in fused deposition modeling
Res. J. Appl. Sci. Eng. Technol. Percoco 4 3838 2012 Compressive properties of FDM rapid prototypes treated with a low cost chemical finishing
Int. J. Mech. Eng. Technol. Rao 3 531 2012 Investigation of post processing techniques to reduce the surface roughness of fused deposition modeled parts
Int. J. Adv. Manuf. Technol. Rianmora 46 1021 2010 10.1007/s00170-009-2162-0 Recommended slicing positions for adaptive direct slicing by image processing technique
Rapid Prototyp. J. Sun 14 72 2008 10.1108/13552540810862028 Effect of processing conditions on the bonding quality of FDM polymer filaments
Int. J. Mach. Tools Manuf. Thrimurthulu 44 585 2004 10.1016/j.ijmachtools.2003.12.004 Optimum part deposition orientation in fused deposition modeling
Rapid Prototyp. J. Turner 20 192 2014 10.1108/RPJ-01-2013-0012 A review of melt extrusion additive manufacturing processes: i. process design and modeling
Wohlers 2012 Wohlers Report 2012: Executive Summary
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.