최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composite structures, v.152, 2016년, pp.34 - 44
Avendano, R. , Carbas, R.J.C. , Marques, E.A.S. , da Silva, L.F.M. , Fernandes, A.A.
The use of innovative lightweight materials for structural design in the automotive industry is no longer a novelty. When joining different parts made of these new materials it is clear that adhesives are one of the best solutions. However, the selection of a suitable adhesive for this application a...
da Silva 2011 Handbook of adhesion technology
J Adhes Marques 91 556 2015 10.1080/00218464.2014.943395 Adhesive joints for low-and high-temperature use: an overview
Proc Inst Mech Eng L J Mater Des Appl Pethrick 2014 Design and ageing of adhesives for structural adhesive bonding - A review
Int J Adhes Adhes Kadioglu 56 73 2013 10.1016/j.ijadhadh.2014.08.001 Flexible adhesives for automotive application under impact loading
J Adhes Loureiro 86 765 2010 10.1080/00218464.2010.482440 Comparison of the mechanical behaviour between stiff and flexible adhesive joints for the automotive industry
Int J Adhes Adhes Zhang 56 3 2015 10.1016/j.ijadhadh.2014.07.008 Experimental study of strain rate effects on the strength of adhesively bonded joints after hygrothermal exposure
Int J Adhes Adhes Beevers 4 13 1984 10.1016/0143-7496(84)90055-1 Impact behaviour of bonded mild steel lap joints
J Adhes Sci Technol Banea 25 2461 2011 10.1163/016942411X580144 Effects of temperature and loading rate on the mechanical properties of a high temperature epoxy adhesive
Int J Adhes Adhes Goglio 28 329 2008 10.1016/j.ijadhadh.2007.08.004 High strain-rate compression and tension behaviour of an epoxy bi-component adhesive
Biel A, Stigh U, Walander T. A Critical Study of an Alternative Method to Measure Cohesive Properties of Adhesive Layers. 2013.
Int J Adhes Adhes Zgoul 24 355 2004 10.1016/j.ijadhadh.2003.11.006 Numerical modelling of lap joints bonded with a rate-dependent adhesive
Avendano R, Carbas RJC, Chaves FJP, da Silva LFM, Fernandes AA. Impact loading of single lap joints of dissimilar lightweight adherends bonded with a crash-resistant epoxy adhesive. J Eng Mater Technol, in press.
Int J Adhes Adhes Vaidya 26 184 2006 10.1016/j.ijadhadh.2005.03.013 Experimental-numerical studies of transverse impact response of adhesively bonded lap joints in composite structures
J Mater Sci Harding 18 1810 1983 10.1007/BF00542078 A tensile testing technique for fibre-reinforced composites at impact rates of strain
Int J Adhes Adhes Adams 12 185 1992 10.1016/0143-7496(92)90052-W The effect of temperature on the strength of adhesive joints
Int J Adhes Adhes Grant 29 535 2009 10.1016/j.ijadhadh.2009.01.002 Effect of the temperature on the strength of adhesively bonded single lap and T joints for the automotive industry
Int J Fract Carlberger 155 155 2009 10.1007/s10704-009-9337-4 Influence of temperature and strain rate on cohesive properties of a structural epoxy adhesive
J Adhes Sharon 31 21 1989 10.1080/00218468908048211 Effects of loading rate and temperature on the mechanical properties of structural adhesives containing a carrier
Int J Adhes Adhes Banea 31 273 2011 10.1016/j.ijadhadh.2010.09.005 Mode I fracture toughness of adhesively bonded joints as a function of temperature: experimental and numerical study
Compos Sci Technol Campilho 65 1948 2005 10.1016/j.compscitech.2005.04.007 Modelling single and double-lap repairs on composite materials
Compos B Eng Campilho 40 149 2009 10.1016/j.compositesb.2008.10.008 Modelling the tensile fracture behaviour of CFRP scarf repairs
J Adhes Sci Technol Campilho 21 855 2007 10.1163/156856107781061477 Stress and failure analyses of scarf repaired CFRP laminates using a cohesive damage model
Int J Adhes Adhes Campilho 29 195 2009 10.1016/j.ijadhadh.2008.03.005 Numerical prediction on the tensile residual strength of repaired CFRP under different geometric changes
J Adhes Pinto 85 351 2009 10.1080/00218460902880313 Single-lap joints of similar and dissimilar adherends bonded with an acrylic adhesive
Int J Adhes Adhes Pinto 28 452 2008 10.1016/j.ijadhadh.2008.04.003 Shear strength of adhesively bonded polyolefins with minimal surface preparation
J Adhes Sci Technol da Silva 22 15 2008 10.1163/156856108X292241 Alternative methods to measure the adhesive shear displacement in the thick adherend shear test
J Adhes Chaves 90 955 2014 10.1080/00218464.2013.859075 Fracture mechanics tests inadhesively bonded joints: a literaturereview
J Adhes Sci Technol de Moura 23 1477 2009 10.1163/156856109X433036 Mixed-mode cohesive damage model applied to the simulation of the mechanical behaviour of laminated composite adhesive joints
Int J Solids Struct Campilho 45 1497 2008 10.1016/j.ijsolstr.2007.10.003 Using a cohesive damage model to predict the tensile behaviour of CFRP single-strap repairs
Int J Adhes Adhes de Moura 28 419 2008 10.1016/j.ijadhadh.2008.04.004 Cohesive and continuum mixed-mode damage models applied to the simulation of the mechanical behaviour of bonded joints
J Adhes Sci Technol Higuchi 16 1585 2002 10.1163/15685610260255233 Three-dimensional finite element analysis of single-lap adhesive joints under impact loads
Int J Adhes Adhes Liao 31 612 2011 10.1016/j.ijadhadh.2011.06.008 3-D FEM stress analysis and strength evaluation of single-lap adhesive joints subjected to impact tensile loads
Int J Adhes Adhes Liao 44 91 2013 10.1016/j.ijadhadh.2013.02.007 Experimental and FEM studies on mechanical properties of single-lap adhesive joint with dissimilar adherends subjected to impact tensile loadings
J Adhes Sci Technol Sawa 17 2157 2003 10.1163/156856103772150760 Three-dimensional finite element stress analysis of single-lap adhesive joints of dissimilar adherends subjected to impact tensile loads
Latin American J Solids Struct Silva 13 835 2016 10.1590/1679-78252762 Behaviour under impact of mixed adhesive joints for the automotive industry
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.