참고문헌 (36)

1. Mutua J, Kihiu JM, Rading GO, Kimotho JK. Use of magnesium alloys in optimizing the weight of automobile: current trends and opportunities. 

2. Amory 2005 Winning the oil endgame 

3. Mater Des Li 25 579 2004 10.1016/j.matdes.2004.02.018 Experimental study of glass-fiber mat thermoplastic material impact properties and lightweight automobile body analysis 

   상세보기

4. Int J Automot Compos Belingardi 1 1 2014 10.1504/IJAUTOC.2014.064128 Design optimization and Implementation of composite and recyclable thermoplastic materials for automotive bumper 

   

5. Mater Des Ning 30 983 2009 10.1016/j.matdes.2008.06.066 Design and development of thermoplastic composite roof door for mass transit bus 

   상세보기

6. Compos Part A Appl Sci Manuf Thattaiparthasarthy 39 1512 2008 10.1016/j.compositesa.2008.05.017 Process simulation, design and manufacturing of a long fiber thermoplastic composite for mass transit application 

   상세보기

7. Compos Struct Janowski 80 82 2007 10.1016/j.compstruct.2006.04.090 Thermoplastic sandwich structure design and manufacturing for the body panel of mass transit vehicle 

   상세보기

8. Compos Struct Ning 80 105 2007 10.1016/j.compstruct.2006.04.036 Design, manufacture and analysis of a thermoplastic composite frame structure for mass transit 

   상세보기

9. J Thermoplast Compos Mater Bartus 19 131 2006 10.1177/0892705706062184 Design and development of a long fiber thermoplastic bus seat 

   상세보기

10. Int J Crash Yang 17 295 2012 10.1080/13588265.2012.661211 Application of FRP in a vehicle for student formula SAE competition of Japan 

    상세보기

11. Compos Struct Liu 97 231 2013 10.1016/j.compstruct.2012.09.052 Lightweight design of carbon twill weave fabric composite body structure for electric vehicle 

    상세보기

12. Compos Sci Technol Bouchet 60 1891 2000 10.1016/S0266-3538(00)00058-0 Static and dynamic behavior of combined composite aluminium tube for automotive applications 

    상세보기

13. J Compos Struct Belingardi 102 217 2013 10.1016/j.compstruct.2013.02.013 Geometrical optimization of bumper beam profile made of pultruded composite by numerical simulation 

    상세보기

14. Int J Automot Compos Koricho 1 1 90 2014 10.1504/IJAUTOC.2014.064129 Design of a composite engine support sub-frame to achieve lightweight vehicles 

    

15. Thin-Walled Struct Bambach 74 1 2014 10.1016/j.tws.2013.09.018 Fibre composite strengthening of thin steel passenger vehicle roof structures 

    상세보기

16. Compos Struct Obradovic 94 23 2014 Lightweight design and crash analysis of composite frontal impact energy absorbing structures 

17. Compos Struct Mamalis 69 407 2004 10.1016/j.compstruct.2004.07.021 On the response of thin-walled CFRP composite tubular components subjected to static and dynamic axial compressive loading: experimental 

    상세보기

18. Key Eng Mater Yang 334-335 581 2007 10.4028/www.scientific.net/KEM.334-335.581 Energy absorption capability of 3D braided-textile composite tubes with rectangular cross section 

    상세보기

19. Mater Des Ghasemnejad 31 1105 2009 10.1016/j.matdes.2009.09.043 Effect of delamination failure in crashworthiness analysis of hybrid composite box structures 

    상세보기

20. Int J Crashworthiness Boria 17 4 345 2012 10.1080/13588265.2011.648516 Numerical investigation of energy absorbers in composite materials for automotive applications 

    상세보기

21. Cramer 2002 Proc. of the 19th int. battery, hybrid and fuel cell electric vehicle symposium & exhibit Design and manufacture of an affordable advanced-composite automotive body structure 

22. Lobst S, Berger L, Schroeder J (from GM), Dahl J, Houston D (from Ford), Mao M (from DC). Automotive composite consortium B-pillar molding program. 

23. Compos Part B Eng Feraboli 35 323 2004 10.1016/j.compositesb.2003.11.010 Development of carbon/epoxy structural components for a high performance vehicle 

    상세보기

24. J Reinf Plast Compos Jacob 54 38 2010 BMW counts on carbon fiber for its megacity vehicle 

25. Belingardi 2010 14th European conference on composite materials Implementation of composite material car body structural joint and investigation of its characteristics with geometry modifications 

26. Belingardi 1 2009 978-86-80941-34-9 XXII Intl. automotive conference, Belgrade, April 2009 Influence of geometry modification of vehicle body joints on their structural behaviour 

27. J Teknol Fai 47 A 35 2007 The effect of diaphragm in continuous sill member on the strength of automotive B-Pillar 

28. Jong-Keun C, Yong R, Seok H, Jung H. Study on the beam modelling box channel structure: for the T type joint structure, SAE paper 960554. 

29. Compos Part A Cavatorta 38 4 1251 2007 10.1016/j.compositesa.2006.06.010 A finite element simulation and experimental validation of a composite bolted joint loaded in bending and torsion 

    상세보기

30. Adv Struct Mater Ghazijahani 16 119 2012 10.1007/978-3-642-22700-4_7 Bending experiments on thin cylindrical shells 

    

31. Abaqus 6.9 documentation. 

32. Compos Struct Vo 94 954 2012 10.1016/j.compstruct.2011.10.027 Low-impulse blast behaviour of fibre-metal laminates 

    상세보기

33. Koricho 2012 Implementation of composites and plastics materials for vehicle lightweight 

34. Lamb 2007 Experimental investigation and numerical modelling of composite-honeycomb materials used in formula 1 crash structures 

35. Tsai 2008 Strength & life of composites 

36. Fibres Text East Eur Lohrasbi 19 5(88) 2011 Influence of weave type and weft density on worsted fabric pilling