$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Effect of temperature and strain rate on single lap joints with dissimilar lightweight adherends bonded with an acrylic adhesive

Composite structures, v.152, 2016년, pp.34 - 44  

Avendano, R. ,  Carbas, R.J.C. ,  Marques, E.A.S. ,  da Silva, L.F.M. ,  Fernandes, A.A.

Abstract AI-Helper 아이콘AI-Helper

The use of innovative lightweight materials for structural design in the automotive industry is no longer a novelty. When joining different parts made of these new materials it is clear that adhesives are one of the best solutions. However, the selection of a suitable adhesive for this application a...

주제어

참고문헌 (36)

  1. da Silva 2011 Handbook of adhesion technology 

  2. J Adhes Marques 91 556 2015 10.1080/00218464.2014.943395 Adhesive joints for low-and high-temperature use: an overview 

  3. Proc Inst Mech Eng L J Mater Des Appl Pethrick 2014 Design and ageing of adhesives for structural adhesive bonding - A review 

  4. Int J Adhes Adhes Kadioglu 56 73 2013 10.1016/j.ijadhadh.2014.08.001 Flexible adhesives for automotive application under impact loading 

  5. J Adhes Loureiro 86 765 2010 10.1080/00218464.2010.482440 Comparison of the mechanical behaviour between stiff and flexible adhesive joints for the automotive industry 

  6. Int J Adhes Adhes Zhang 56 3 2015 10.1016/j.ijadhadh.2014.07.008 Experimental study of strain rate effects on the strength of adhesively bonded joints after hygrothermal exposure 

  7. Int J Adhes Adhes Beevers 4 13 1984 10.1016/0143-7496(84)90055-1 Impact behaviour of bonded mild steel lap joints 

  8. J Adhes Sci Technol Banea 25 2461 2011 10.1163/016942411X580144 Effects of temperature and loading rate on the mechanical properties of a high temperature epoxy adhesive 

  9. Int J Adhes Adhes Goglio 28 329 2008 10.1016/j.ijadhadh.2007.08.004 High strain-rate compression and tension behaviour of an epoxy bi-component adhesive 

  10. Biel A, Stigh U, Walander T. A Critical Study of an Alternative Method to Measure Cohesive Properties of Adhesive Layers. 2013. 

  11. Int J Adhes Adhes Zgoul 24 355 2004 10.1016/j.ijadhadh.2003.11.006 Numerical modelling of lap joints bonded with a rate-dependent adhesive 

  12. Avendano R, Carbas RJC, Chaves FJP, da Silva LFM, Fernandes AA. Impact loading of single lap joints of dissimilar lightweight adherends bonded with a crash-resistant epoxy adhesive. J Eng Mater Technol, in press. 

  13. Int J Adhes Adhes Vaidya 26 184 2006 10.1016/j.ijadhadh.2005.03.013 Experimental-numerical studies of transverse impact response of adhesively bonded lap joints in composite structures 

  14. J Mater Sci Harding 18 1810 1983 10.1007/BF00542078 A tensile testing technique for fibre-reinforced composites at impact rates of strain 

  15. Adv Compos Mater Taniguchi 16 167 2007 10.1163/156855107780918937 Tensile strength of unidirectional CFRP laminate under high strain rate 

  16. Int J Adhes Adhes Adams 12 185 1992 10.1016/0143-7496(92)90052-W The effect of temperature on the strength of adhesive joints 

  17. Int J Adhes Adhes Grant 29 535 2009 10.1016/j.ijadhadh.2009.01.002 Effect of the temperature on the strength of adhesively bonded single lap and T joints for the automotive industry 

  18. Int J Fract Carlberger 155 155 2009 10.1007/s10704-009-9337-4 Influence of temperature and strain rate on cohesive properties of a structural epoxy adhesive 

  19. J Adhes Sharon 31 21 1989 10.1080/00218468908048211 Effects of loading rate and temperature on the mechanical properties of structural adhesives containing a carrier 

  20. Int J Adhes Adhes Banea 31 273 2011 10.1016/j.ijadhadh.2010.09.005 Mode I fracture toughness of adhesively bonded joints as a function of temperature: experimental and numerical study 

  21. Compos Sci Technol Campilho 65 1948 2005 10.1016/j.compscitech.2005.04.007 Modelling single and double-lap repairs on composite materials 

  22. Compos B Eng Campilho 40 149 2009 10.1016/j.compositesb.2008.10.008 Modelling the tensile fracture behaviour of CFRP scarf repairs 

  23. J Adhes Sci Technol Campilho 21 855 2007 10.1163/156856107781061477 Stress and failure analyses of scarf repaired CFRP laminates using a cohesive damage model 

  24. Int J Adhes Adhes Campilho 29 195 2009 10.1016/j.ijadhadh.2008.03.005 Numerical prediction on the tensile residual strength of repaired CFRP under different geometric changes 

  25. J Adhes Pinto 85 351 2009 10.1080/00218460902880313 Single-lap joints of similar and dissimilar adherends bonded with an acrylic adhesive 

  26. Int J Adhes Adhes Pinto 28 452 2008 10.1016/j.ijadhadh.2008.04.003 Shear strength of adhesively bonded polyolefins with minimal surface preparation 

  27. J Adhes Sci Technol da Silva 22 15 2008 10.1163/156856108X292241 Alternative methods to measure the adhesive shear displacement in the thick adherend shear test 

  28. J Adhes Chaves 90 955 2014 10.1080/00218464.2013.859075 Fracture mechanics tests inadhesively bonded joints: a literaturereview 

  29. J Adhes Sci Technol de Moura 23 1477 2009 10.1163/156856109X433036 Mixed-mode cohesive damage model applied to the simulation of the mechanical behaviour of laminated composite adhesive joints 

  30. Int J Solids Struct Campilho 45 1497 2008 10.1016/j.ijsolstr.2007.10.003 Using a cohesive damage model to predict the tensile behaviour of CFRP single-strap repairs 

  31. Int J Adhes Adhes de Moura 28 419 2008 10.1016/j.ijadhadh.2008.04.004 Cohesive and continuum mixed-mode damage models applied to the simulation of the mechanical behaviour of bonded joints 

  32. J Adhes Sci Technol Higuchi 16 1585 2002 10.1163/15685610260255233 Three-dimensional finite element analysis of single-lap adhesive joints under impact loads 

  33. Int J Adhes Adhes Liao 31 612 2011 10.1016/j.ijadhadh.2011.06.008 3-D FEM stress analysis and strength evaluation of single-lap adhesive joints subjected to impact tensile loads 

  34. Int J Adhes Adhes Liao 44 91 2013 10.1016/j.ijadhadh.2013.02.007 Experimental and FEM studies on mechanical properties of single-lap adhesive joint with dissimilar adherends subjected to impact tensile loadings 

  35. J Adhes Sci Technol Sawa 17 2157 2003 10.1163/156856103772150760 Three-dimensional finite element stress analysis of single-lap adhesive joints of dissimilar adherends subjected to impact tensile loads 

  36. Latin American J Solids Struct Silva 13 835 2016 10.1590/1679-78252762 Behaviour under impact of mixed adhesive joints for the automotive industry 

관련 콘텐츠

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로