$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Contact angle measurements of pure refrigerants

International journal of heat and mass transfer, v.102, 2016년, pp.877 - 883  

Lu, X. ,  Liu, J. ,  Xu, X.

Abstract AI-Helper 아이콘AI-Helper

The contact angle is the most important measurable characteristic to describe wettability, which plays a critical role in two-phase heat transfer. In this work, the contact angle of refrigerants (R134a, R22, R290, R600a, R32) with the metal copper/stainless steel/aluminum has been measured in the te...

주제어

참고문헌 (26)

  1. Adv. Colloid Interface Bourdon 221 34 2015 10.1016/j.cis.2015.04.004 Wettability influence on the onset temperature of pool boiling: experimental evidence onto ultra-smooth surfaces 

  2. Appl. Therm. Eng. Zupani 91 288 2015 10.1016/j.applthermaleng.2015.08.026 Enhanced pool-boiling heat transfer on laser-made hydrophobic/superhydrophilic polydimethylsiloxane-silica patterned surfaces 

  3. Int. J. Heat Mass Transfer Gong 85 635 2015 10.1016/j.ijheatmasstransfer.2015.02.008 Lattice Boltzmann simulations for surface wettability effects in saturated pool boiling heat transfer 

  4. Int. J. Heat Mass Transfer Phan 52 23-24 5459 2009 10.1016/j.ijheatmasstransfer.2009.06.032 Surface wettability control by nanocoating: the effects on pool boiling heat transfer and nucleation mechanism 

  5. Int. J. Heat Mass Transfer Wong 54 17-18 3921 2011 10.1016/j.ijheatmasstransfer.2011.04.033 Effect of copper surface wettability on the evaporation performance: tests in a flat-plate heat pipe with visualization 

  6. J. Heat Transfer Hao 136 8 82001 2014 10.1115/1.4027390 Effects of superhydrophobic and superhydrophilic surfaces on heat transfer and oscillating motion of an oscillating heat pipe 

  7. J. Heat Transfer Yulong 134 7 74502 2012 10.1115/1.4006111 Hydrophobic surface effect on heat transfer performance in an oscillating heat pipe 

  8. Rev. Mod. Phys. Craster 81 3 1131 2009 10.1103/RevModPhys.81.1131 Dynamics and stability of thin liquid films 

  9. Energy Convers. Manage. Kumar 48 12 3053 2007 10.1016/j.enconman.2007.05.021 Computational and experimental investigation of low ODP and low GWP HCFC-123 and HC-290 refrigerant mixture alternate to CFC-12 

  10. CIESC J. Zhang 66 12 5012 2015 Characteristics of refrigerant hold-up and heat transfer performance of falling film condenser under refrigerating condition 

  11. Int. J. Heat Mass Transfer Park 44 22 4277 2001 10.1016/S0017-9310(01)00068-0 Heat- and mass-transfer analysis for the condensing film flow along a vertical grooved tube 

  12. Wang 2011 Effect of surface coating distribution configurations on the falling liquid film flow and heat transfer 

  13. Soft Matter Marmur 2 1 12 2006 10.1039/B514811C Soft contact: measurement and interpretation of contact angles 

  14. Adv. Colloid Interface Kwok 81 3 167 1999 10.1016/S0001-8686(98)00087-6 Contact angle measurement and contact angle interpretation 

  15. Langmuir Kwok 13 10 2880 1997 10.1021/la9608021 Contact Angle Measurements and Contact Angle Interpretation. 1. Contact Angle Measurements by Axisymmetric Drop Shape Analysis and a Goniometer Sessile Drop Technique 

  16. Colloids Surf. A Physicochem. Eng. Aspects Gindl 181 1-3 279 2001 10.1016/S0927-7757(00)00795-0 A comparison of different methods to calculate the surface free energy of wood using contact angle measurements 

  17. Miner. Eng. Chau 22 3 213 2009 10.1016/j.mineng.2008.07.009 A review of techniques for measurement of contact angles and their applicability on mineral surfaces 

  18. Exp. Therm. Fluid Sci. Vadgama 31 8 979 2007 10.1016/j.expthermflusci.2006.10.010 Measurements of the contact angle between R134a and both aluminum and copper surfaces 

  19. Int. J. Refrig. Lin 61 23 2016 10.1016/j.ijrefrig.2015.09.001 Influence of oil concentration on wetting behavior during evaporation of refrigerant-oil mixture on copper surface 

  20. Adv. Colloid Interface Hoorfar 121 1-3 25 2006 10.1016/j.cis.2006.06.001 Recent progress in axisymmetric drop shape analysis (ADSA) 

  21. Colloids Surf. A Physicochem. Eng. Aspects Yongan Gu 122 1-3 135 1997 A novel contact angle measurement technique by analysis of capillary rise profile around a cylinder (ACRPAC) 

  22. Image Vision Comput. Ying-Dong 23 1 11 2005 10.1016/j.imavis.2004.07.003 A fast subpixel edge detection method using Sobel-Zernike moments operator 

  23. Optik - Int. J. Light Electron. Opt. Sun 127 14 5702 2016 10.1016/j.ijleo.2016.03.058 A subpixel edge detection method based on an arctangent edge model 

  24. Colloids Surf. A Bateni 219 1-3 215 2003 10.1016/S0927-7757(03)00053-0 A high-accuracy polynomial fitting approach to determine contact angles 

  25. J. Colloid Interface Sci. Chatterjee 314 1 199 2007 10.1016/j.jcis.2007.05.051 Prediction of coupled menisci shapes by Young-Laplace equation and the resultant variability in capillary retention 

  26. Int. J. Refrig. Yang 67 157 2016 10.1016/j.ijrefrig.2016.04.007 A mathematic model for predicting the volume of water bridge retaining between vertical fin surfaces 

관련 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로