최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Measurement science & technology, v.26 no.11, 2015년, pp.115602 -
Hernandez-Valle, Saul , Peters, Kara
In this work we apply the finite element (FE) method to simulate the results of pulsed phase thermography experiments on laminated composite plates. Specifically, the goal is to simulate the phase component of reflected thermal waves and therefore verify the calculation of defect depth through the i...
[1] Meola C and Carlomagno G M 2010 Impact damage in GFRP: new insights with infrared thermography Composites A 41 1839–47 10.1016/j.compositesa.2010.09.002 Impact damage in GFRP: new insights with infrared thermography Meola C and Carlomagno G M Composites 1359-835X 41 A 2010 1839 1847
[2] Ibarra-Castanedo C, Avdelidis N P, Grinzato E G, Bison P G, Marinetti S, Plescanu C C, Bendada A and Maldague X P 2011 Delamination detection and impact damage assessment of GLARE by active thermography Int. J. Mater. Prod. Technol. 41 5–16 10.1504/IJMPT.2011.040282 Delamination detection and impact damage assessment of GLARE by active thermography Ibarra-Castanedo C, Avdelidis N P, Grinzato E G, Bison P G, Marinetti S, Plescanu C C, Bendada A and Maldague X P Int. J. Mater. Prod. Technol. 41 2011 5 16
[3] Schmutzler H, Alder M, Kosmann N, Wittich H and Schulte K 2014 Degradation monitoring of impact damaged carbon fibre reinforced polymers under fatigue loading with pulse phase thermography Composites B 59 221–9 10.1016/j.compositesb.2013.12.010 Degradation monitoring of impact damaged carbon fibre reinforced polymers under fatigue loading with pulse phase thermography Schmutzler H, Alder M, Kosmann N, Wittich H and Schulte K Composites 1359-8368 59 B 2014 221 229
[4] Maldague X P and Marinetti S 1996 Pulse phase infrared thermography J. Appl. Phys. 79 2694–8 10.1063/1.362662 Pulse phase infrared thermography Maldague X P and Marinetti S J. Appl. Phys. 79 1996 2694 2698
[5] Ibarra-Castanedo C, Genest M, Servais P, Maldague X and Bendada A 2007 Qualitative and quantitative assessment of aerospace structures by pulsed thermography J. Nondestruct. Test. Eval. 22 199–215 10.1080/10589750701448548 Qualitative and quantitative assessment of aerospace structures by pulsed thermography Ibarra-Castanedo C, Genest M, Servais P, Maldague X and Bendada A J. Nondestruct. Test. Eval. 22 2007 199 215
[6] Kumar S S, Kumar M R, Sudheendra H N and Sathish R 2011 Puse phase thermographic non-destructive evaluation of composite aircraft structures Insight 53 312–15 10.1784/insi.2011.53.6.312 Puse phase thermographic non-destructive evaluation of composite aircraft structures Kumar S S, Kumar M R, Sudheendra H N and Sathish R Insight 53 2011 312 315
[7] Krishnapillai M, Jones R, Marshall I H, Bannister M and Rajic N 2006 NDTE using pulse thermography: numerical modeling of composite subsurface defects Compos. Struct. 75 241–9 10.1016/j.compstruct.2006.04.079 NDTE using pulse thermography: numerical modeling of composite subsurface defects Krishnapillai M, Jones R, Marshall I H, Bannister M and Rajic N Compos. Struct. 0263-8223 75 2006 241 249
[8] Bai W and Wong B S 2002 Thermal wave scattering from subsurface defects in plates with finite thickness under convective environments Meas. Sci. Technol. 13 700–5 10.1088/0957-0233/13/5/307 Thermal wave scattering from subsurface defects in plates with finite thickness under convective environments Bai W and Wong B S Meas. Sci. Technol. 0957-0233 13 5 307 2002 700 705
[9] Cannas B, Carcangiu S, Concu G and Trulli N 2012 Modeling of active infrared thermography for defect detection in concrete structures Proc. 2012 COMSOL Conference (Milan,) Modeling of active infrared thermography for defect detection in concrete structures Cannas B, Carcangiu S, Concu G and Trulli N Proc. 2012 COMSOL Conference 2012
[10] Hain M, Bartl J and Jacko V 2009 Active infrared thermography in non-destructive testing Proc. 7th Int. Conf. Measurement pp 339–43 Active infrared thermography in non-destructive testing Hain M, Bartl J and Jacko V Proc. 7th Int. Conf. Measurement 2009 339 343
[11] Chu T, Mahajan A, DiGregorio A and Russell S S 2005 Determination of optimal experimental parameters for transient thermography imaging using finite-element models Imag. Sci. J. 53 20–6 10.1179/136821904X13011 Determination of optimal experimental parameters for transient thermography imaging using finite-element models Chu T, Mahajan A, DiGregorio A and Russell S S Imag. Sci. J. 53 2005 20 26
[12] Oswald-Tranta B and Sorger M 2012 Scanning pulse phase thermography with line heating Quant. InfraRed Thermogr. J. 9 103–22 10.1080/17686733.2012.714967 Scanning pulse phase thermography with line heating Oswald-Tranta B and Sorger M Quant. InfraRed Thermogr. J. 9 2012 103 122
[13] Ptaszek G, Cawley P, Almond D and Pickering S 2012 Artificial disbonds for calibration of transient thermography inspection of thermal barrier coating systems NDT & E Int. 45 71–8 10.1016/j.ndteint.2011.09.008 Artificial disbonds for calibration of transient thermography inspection of thermal barrier coating systems Ptaszek G, Cawley P, Almond D and Pickering S NDT & E Int. 0308-9126 45 2012 71 78
[14] Van Leeuen J, Nahant M and Paez S 2011 Study of pulsed phase thermography for the detection of honeycombing defects in concrete structures Proc. CompNDT Study of pulsed phase thermography for the detection of honeycombing defects in concrete structures Van Leeuen J, Nahant M and Paez S Proc. CompNDT 2011
[16] Mayr G and Hendorfer G 2010 Characterization of defects in curved carbon fiber reinforced plastics using pulsed thermography Quant. InfraRed Thermogr. J. 7 3–16 10.3166/qirt.7.3-16 Characterization of defects in curved carbon fiber reinforced plastics using pulsed thermography Mayr G and Hendorfer G Quant. InfraRed Thermogr. J. 7 2010 3 16
[17] Hendorfer G 2009 Active thermography for quantitative analysis of defects in composites MP Mater. Test. 51 400–4 10.3139/120.110052 Active thermography for quantitative analysis of defects in composites Hendorfer G MP Mater. Test. 51 2009 400 404
[18] Susa M, Ibarra-Castanedo C, Maldague X, Bendada A, Svaic S and Boras I 2007 Pulse thermography applied on a complex structure sample: comparison and analysis of numerical and experimental results Proc. Conf. Panamericana de END Pulse thermography applied on a complex structure sample: comparison and analysis of numerical and experimental results Susa M, Ibarra-Castanedo C, Maldague X, Bendada A, Svaic S and Boras I Proc. Conf. Panamericana de END 2007
[19] Fachinotti V D and Bellet M 2006 Linear tetrahedral finite elements for thermal shock problems Int. J. Numer. Methods Heat Fluid Flow 16 590–601 10.1108/09615530610669120 Linear tetrahedral finite elements for thermal shock problems Fachinotti V D and Bellet M Int. J. Numer. Methods Heat Fluid Flow 0961-5539 16 2006 590 601
[20] Bai W and Wong B S 2001 Evaluation of defects in composite plates under convective environments using lock-in thermography Meas. Sci. Technol. 12 142–50 10.1088/0957-0233/12/2/303 Evaluation of defects in composite plates under convective environments using lock-in thermography Bai W and Wong B S Meas. Sci. Technol. 0957-0233 12 2 303 2001 142 150
[21] Maldague X P V 2001 Theory and Practice of Infrared Technology for Nondestructive Testing (New York: Wiley) chapter 10 Maldague X P V Theory and Practice of Infrared Technology for Nondestructive Testing 2001
[22] Culshaw H S and Jaeger J C 1959 Conduction of Heat in Solids (Oxford: Oxford University Press) Culshaw H S and Jaeger J C Conduction of Heat in Solids 1959
[24] Pawar S S and Peters K 2013 Through the thickness identification of impact damage in composite laminates through pulsed phase thermography Meas. Sci. Technol. 24 115601 10.1088/0957-0233/24/11/115601 Through the thickness identification of impact damage in composite laminates through pulsed phase thermography Pawar S S and Peters K Meas. Sci. Technol. 0957-0233 24 11 115601 2013
[25] www.engineeringtoolbox.com/air-properties-d_156.html
[26] Schimper R, Rinker M and Schauble R 2009 Prediction of material behaviour of closed cell rigid foams via mesoscopic modelling Int. Conf. on Composite Materials (ICCM) DVD (Edinburgh, 27–31 July 2009) Prediction of material behaviour of closed cell rigid foams via mesoscopic modelling Schimper R, Rinker M and Schauble R Int. Conf. on Composite Materials (ICCM) DVD 2009
[27] www.infrared-thermography.com/material-1.htm
[28] Churchill S W and Chu H 1975 Correlating equations for laminar and turbulent free convection from a vertical plate Int. J. Heat Mass Transfer 18 1323–9 10.1016/0017-9310(75)90243-4 Correlating equations for laminar and turbulent free convection from a vertical plate Churchill S W and Chu H Int. J. Heat Mass Transfer 0017-9310 18 1975 1323 1329
[29] Klein M T, Ibarra-Castanedo C, Maldague X P and Bendada A 2008 A straightforward graphical user interface for basic and advanced signal processing of thermographic infrared sequences Proc. SPIE 6939 693915 10.1117/12.777002 A straightforward graphical user interface for basic and advanced signal processing of thermographic infrared sequences Klein M T, Ibarra-Castanedo C, Maldague X P and Bendada A Proc. SPIE 0277-786X 6939 693915 2008
[30] Ramos A and Simões J A 2006 Tetrahedral versus hexahedral finite elements in numerical modelling of the proximal femur Med. Eng. Phys. 28 916–24 10.1016/j.medengphy.2005.12.006 Tetrahedral versus hexahedral finite elements in numerical modelling of the proximal femur Ramos A and Simões J A Med. Eng. Phys. 1350-4533 28 2006 916 924
[31] Benzley SE, Perry E, Merkley K, Clark B and Sjaardema G 1995 A comparison of all-hexahedral and all-tetrahedral finite element meshes for elastic and elasto-plastic analysis Proc. 4th Int. Meshing Roundtable (Sandia National Laboratories, NM) pp 179–91 A comparison of all-hexahedral and all-tetrahedral finite element meshes for elastic and elasto-plastic analysis Benzley SE, Perry E, Merkley K, Clark B and Sjaardema G Proc. 4th Int. Meshing Roundtable (Sandia National Laboratories, NM) 1995 179 191
[32] Wallbrink C, Wade S A and Jones R 2007 The effect of size on the quantitative estimation of defect depth in steel structures using lock-in thermography J. Appl. Phys. 101 104907 10.1063/1.2732443 The effect of size on the quantitative estimation of defect depth in steel structures using lock-in thermography Wallbrink C, Wade S A and Jones R J. Appl. Phys. 101 104907 2007
[33] Mabry N, Peters K and Seracino R 2015 Depth detection of bond defects in multilayered externally bonded CFRP-to-concrete using pulse phase thermography J. Compos. Constr. at press Depth detection of bond defects in multilayered externally bonded CFRP-to-concrete using pulse phase thermography Mabry N, Peters K and Seracino R J. Compos. Constr. 1090-0268 2015
[34] Ishikawa M, Hatta H, Habuka Y, Fukui R and Utsunomiya S 2013 Detecting deeper defects using pulse phase thermography Infrared Phys. Technol. 57 42–9 10.1016/j.infrared.2012.11.009 Detecting deeper defects using pulse phase thermography Ishikawa M, Hatta H, Habuka Y, Fukui R and Utsunomiya S Infrared Phys. Technol. 1350-4495 57 2013 42 49
[35] Ibarra-Castanedo C, Avdelidis N P, Grainzato E G, Bison P G, Marinetti S, Chen L, Genest M and Maldague X 2006 Quantitative inspection of non-planar composite specimens by pulsed phase thermography QIRT J. 3 25–40 10.3166/qirt.3.25-40 Quantitative inspection of non-planar composite specimens by pulsed phase thermography Ibarra-Castanedo C, Avdelidis N P, Grainzato E G, Bison P G, Marinetti S, Chen L, Genest M and Maldague X QIRT J. 3 2006 25 40
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.