다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Mechanics research communications, v.78 pt.B, 2016년, pp.71 - 78
Park, Kyoungsoo (Department of Civil & Environmental Engineering, Yonsei University, 50 Yonsei-ro Seodaemun-gu, Seoul 03722, Korea, Korea) , Choi, Habeun (Department of Civil & Environmental Engineering, Yonsei University, 50 Yonsei-ro Seodaemun-gu, Seoul 03722, Korea, Korea) , Paulino, Glaucio H. (School of Civil & Environmental Engineering, Georgia Institute of Technology, 790 Atlantic Dr., Atlanta, GA 30332-0355, U.S.A, USA)
AI-Helper
The definition of a traction-separation relationship is essential in cohesive zone models because it describes the nonlinear fracture process zone. A few models are investigated in this paper and a comparative study is conducted. Among various traction-separation relationships, the one in Abaqus is ...
2013 Abaqus 6.13 Analysis User’s Manual
Compos. Sci. Technol. Benzeggagh 56 4 439 1996 10.1016/0266-3538(96)00005-X Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus
J. Compos. Mater. Camanho 37 16 1415 2003 10.1177/0021998303034505 Numerical simulation of mixed-mode progressive delamination in composite materials
Int. J. Adhes. Adhes. Campilho 44 48 2013 10.1016/j.ijadhadh.2013.02.006 Modelling adhesive joints with cohesive zone models: effect of the cohesive law shape of the adhesive layer
Eng. Fract. Mech. Cerrone 120 26 2014 10.1016/j.engfracmech.2014.03.010 Implementation and verification of the Park-Paulino-Roesler cohesive zone model in 3D
Int. J. Solids Struct. Chandra 39 10 2827 2002 10.1016/S0020-7683(02)00149-X Some issues in the application of cohesive zone models for metal-ceramic interfaces
Eng. Fract. Mech. Elices 69 2 137 2002 10.1016/S0013-7944(01)00083-2 The cohesive zone model: advantages, limitations and challenges
Eng. Fract. Mech. Harper 75 16 4774 2008 10.1016/j.engfracmech.2008.06.004 Cohesive zone length in numerical simulations of composite delamination
Int. J. Numer. Methods Eng. Jiang 69 1982 2007 10.1002/nme.1842 A concise interface constitutive law for analysis of delamination and splitting in composite materials and its application to scaled notched tensile specimens
Int. J. Adhes. Adhes. Lee 30 5 322 2010 10.1016/j.ijadhadh.2009.10.005 Determination of cohesive parameters for a mixed-mode cohesive zone model
Int. J. Numer. Methods Eng. Leon 100 555 2014 10.1002/nme.4744 Reduction in mesh bias for dynamic fracture using adaptive splitting of polygonal finite elements
J. Mech. Phys. Solids McGarry 63 1 336 2014 10.1016/j.jmps.2013.08.020 Potential-based and non-potential-based cohesive zone formulations under mixed-mode separation and over-closure. Part I: theoretical analysis
J. Mech. Phys. Solids Ó Máirtín 63 1 363 2014 10.1016/j.jmps.2013.08.019 Potential-based and non-potential-based cohesive zone formulations under mixed-mode separation and over-closure. Part II: finite element applications
Eng. Fract. Mech. De Morais 73 16 2264 2006 10.1016/j.engfracmech.2006.05.003 Evaluation of initiation criteria used in interlaminar fracture tests
J. Appl. Mech. - Trans. ASME Needleman 54 3 525 1987 10.1115/1.3173064 A continuum model for void nucleation by inclusion debonding
J. Mech. Phys. Solids Needleman 38 3 289 1990 10.1016/0022-5096(90)90001-K An analysis of tensile decohesion along an interface
Compos. Part B-Eng. Neto 91 448 2016 10.1016/j.compositesb.2016.01.054 Assessment of the dependence of CFRP-concrete behaviour on the width of the bonded materials
J. Mech. Phys. Solids Park 57 6 891 2009 10.1016/j.jmps.2008.10.003 A unified potential-based cohesive model of mixed-mode fracture
Cem. Concr. Res. Park 40 6 956 2010 10.1016/j.cemconres.2010.02.004 Cohesive fracture model for functionally graded fiber reinforced concrete
Eng. Fract. Mech. Park 93 239 2012 10.1016/j.engfracmech.2012.02.007 Computational implementation of the PPR potential-based cohesive model in ABAQUS: educational perspective
Appl. Mech. Rev. Park 64 6 060802 2013 10.1115/1.4023110 Cohesive zone models: a critical review of traction-separation relationships across fracture surfaces
Int. J. Numer. Methods Eng. Paulino 84 1303 2010 10.1002/nme.2943 Adaptive dynamic cohesive fracture simulation using nodal perturbation and edge-swap operators
Int. J. Solids Struct. Sørensen 46 3-4 741 2009 10.1016/j.ijsolstr.2008.09.024 Strength scaling of adhesive joints in polymer-matrix composites
Int. J. Fract. Spring 189 1 33 2014 10.1007/s10704-014-9961-5 Unstructured polygonal meshes with adaptive refinement for the numerical simulation of dynamic cohesive fracture
Eng. Fract. Mech. Spring 126 190 2014 10.1016/j.engfracmech.2014.04.004 A growing library of three-dimensional cohesive elements for use in ABAQUS
Mech. Mater. Turon 38 11 1072 2006 10.1016/j.mechmat.2005.10.003 A damage model for the simulation of delamination in advanced composites under variable-mode loading
Mater. Sci. Eng.: A Tvergaard 125 203 1990 10.1016/0921-5093(90)90170-8 Effect of fiber debonding in a whisker-reinforced metal
J. Mech. Phys. Solids Tvergaard 40 6 1377 1992 10.1016/0022-5096(92)90020-3 The relation between crack growth resistance and fracture process parameters in elastic-plastic solids
Mater. Struct. Wittmann 21 1 21 1988 10.1007/BF02472525 Fracture energy and strain softening of concrete as determined by means of compact tension specimens
Model. Simul. Mater. Sci. Eng. Xu 1 2 111 1993 10.1088/0965-0393/1/2/001 Void nucleation by inclusion debonding in a crystal matrix
Int. J. Fract. Yang 110 175 2001 10.1023/A:1010869706996 Mixed-mode fracture analyses of plastically-deforming adhesive
Int. J. Solids Struct. Yang 46 17 3222 2009 10.1016/j.ijsolstr.2009.04.013 Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.