$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Cure behaviors and mechanical properties of carbon fiber-reinforced nylon6/epoxy blended matrix composites

Composites. Part B, Engineering, v.112, 2017년, pp.15 - 21  

Kim, Kwan-Woo (R&D Division, Korea Institute of Carbon Convergence Technology, Jeonju 54853, Republic of Korea) ,  Kim, Dong-Kyu (R&D Division, Korea Institute of Carbon Convergence Technology, Jeonju 54853, Republic of Korea) ,  Kim, Byoung-Suhk (Department of Organic Materials & Fiber Engineering, Chonbuk National University, Jeonju 54896, Republic of Korea) ,  An, Kay-Hyeok (Department of Advanced Nano Materials, Jeonju University, Jeonju 22212, Republic of Korea) ,  Park, Soo-Jin (Department of Chemistry, Inha University, Incheon 55069, Republic of Korea) ,  Rhee, Kyong Yop (Department of Mechanical Engineering, Kyung Hee University, Yongin 17104, Republic of Korea) ,  Kim, Byung-Joo (R&D Division, Korea Institute of Carbon Convergence Technology, Jeonju 54853, Republic of Korea)

Abstract AI-Helper 아이콘AI-Helper

In this work, the composition effects of a nylon6 and epoxy blend system on the cure behaviors and mechanical properties of carbon fiber-reinforced nylon6/epoxy composites were investigated. Ethanol was used as a melting agent for nylon6 (alcohol-soluble nylon), and the content of nylon6 in the mixt...

주제어

참고문헌 (37)

  1. Carbon Fitzer 27 5 621 1989 10.1016/0008-6223(89)90197-8 PAN-based carbon fibers-present state and trend of the technology from the viewpoint of possibilities and limits to influence and control the fiber properties by the process parameters 

  2. Springer Seri Mater Sci Park 210 275 2015 10.1007/978-94-017-9478-7_8 Carbon fibers and their composites 

  3. Adv Mater Ruland 2 528 1990 10.1002/adma.19900021104 Carbon fibers 

  4. J Fluor Chem Du Toit 98 107 1999 10.1016/S0022-1139(99)00091-3 Surface fluorination of polypropylene 1. Characterisation of surface properties 

  5. J Colloid Interface Sci Park 237 91 2001 10.1006/jcis.2001.7441 Interfacial characteristics and fracture toughness of electrolytically Ni-plated carbon fiber-reinforced phenolic resin matrix composites 

  6. Carbon Lett Choi 14 1 58 2013 10.5714/CL.2012.14.1.058 Carbon fibers-reinfoced composites, catalyst, N-benzylpyrazinium hexafluoroantimonate, mechanical interfacial properties 

  7. J Korean Ind Eng Chem Park 14 176 2003 Studies on cure behavior and thermal stability of DGEBA/PMR-15 blend system 

  8. Polym J Kim 29 759 1997 10.1295/polymj.29.759 Effects of N-benzylpyrazinium hexafluoroantimonate concentration on rheological properties in cationic epoxy cure system 

  9. Compos Struct Alam 132 898 2015 10.1016/j.compstruct.2015.06.065 Effect of bond length on the behavior of CFRP strengthened concrete-filled steel tubes under transverse impact 

  10. Compos Sci Technol Tsotra 64 2385 2004 10.1016/j.compscitech.2004.05.003 Short carbon fiber reinforced epoxy resin/polyaniline blends: their electrical and mechanical properties 

  11. J Appl Polym Sci Kim 72 1055 1999 10.1002/(SICI)1097-4628(19990523)72:8<1055::AID-APP10>3.0.CO;2-8 Effects of mixing temperatures on the morphology and toughness of epoxy/polyamide blends 

  12. J Mater Sci Pearson 21 2462 1986 10.1007/BF01114294 Toughening mechanisms in elastomer-modified epoxies 1 Mechanical studies 

  13. J Mater Sci Pearson 21 2475 1986 10.1007/BF01114294 Toughening mechanisms in elastomer-modified epoxies 2 Microscopy studies 

  14. J Mater Sci Pearson 24 2571 1989 10.1007/BF01174528 Toughening mechanisms in elastomer-modified epoxies 3 the effect of cross-link density 

  15. Compos Part B Jhou 71 17 2015 10.1016/j.compositesb.2014.10.053 Crashworthiness characteristics of a carbon fiber reinforced dual-phase epoxy-polyurea hybrid matrix composite 

  16. Mater Sci Eng A Richard 352 344 2003 10.1016/S0921-5093(02)00895-X Reinforcement of rubbery epoxy by carbon nanofibres 

  17. Nanosci Nanotechnol Kim 14 9097 2014 10.1166/jnn.2014.10095 Effects of oxyfluorination on surface and mechanical properties of carbon fiber-reinforced polarized-polypropylene matrix composites 

  18. Polymer Zhong 39 3451 1998 10.1016/S0032-3861(97)10237-3 Miscibility and cure kineticcs of nylon/epoxy resin reactive blends 

  19. Compos Part B Xu 95 423 2016 10.1016/j.compositesb.2016.04.019 Temperature effect on nano-rubber toughening in epoxy and epoxy/carbon fiber laminated composites 

  20. Polymer Poncet 40 6811 1999 10.1016/S0032-3861(99)00104-4 Monitoring phase separation and reaction advanccment in situ in thermoplastic/epoxy blends 

  21. Skeist 331 1962 Handbook of adhesives 

  22. Houwink 1965 Adhesion and adhesives 

  23. Patric 1967 Treatise on adhesion and adhesives 

  24. Kohan 1995 Nylon plastics handbook 

  25. J Adhes Homer 32 141 1990 Cathodic Delamination of an epoxy/polyamide coating from steel 

  26. Corrosion Kosek 51 861 1995 10.5006/1.3293563 Effect of porosity on resistance of epoxy coatings to cold-wall blistering 

  27. Compos Part B Lim 41 67 2010 10.1016/j.compositesb.2009.03.006 Impact fracture behaviour of nylon 6-based ternary 

  28. Standard test method for determining the Charpy impact resistance of notched specimens of plastics. ASTM D6110. 

  29. Thermochim Acta Xia 427 129 2005 10.1016/j.tca.2004.09.002 Non-isothermal crystallization behavior of low-density polyethylene/copper nanocomposites 

  30. Bull Chem Soc Jpn Ozawa 38 1881 1965 10.1246/bcsj.38.1881 A new method of analyzing thermogravimetric data 

  31. J Res Natl Bur Stds Kissinger 57 217 1956 10.6028/jres.057.026 Variation of peak temperature with heating rate in differential thermal analysis 

  32. Eur Polym J Liu 39 2359 2003 10.1016/S0014-3057(03)00166-6 Crystallization, morphology, and dynamic mechanical properties of poly(trimethylene terephthalate)/clay nanocomposites 

  33. Eur Polym J Liu 38 1383 2002 10.1016/S0014-3057(01)00304-4 Non-isothermal crystallization behaviors of polyamide6/clay nanocomposites 

  34. Polymer Weng 44 8119 2003 10.1016/j.polymer.2003.10.028 Crystallization kinetics and melting behaviors of nylon 6/foliated graphite nanocomposite 

  35. Prime 1981 Thermal characterization of polymeric materials 

  36. Anal Chem Doyle 33 1 77 1961 10.1021/ac60169a022 Estimating thermal stability of experimental polymers by empirical thermogravimetric Analysis 

  37. Text Sci Eng Park 38 14 2001 Studies on the thermal stability and electrical properties of conductive acetylene black/high density polyethylene composites 

LOADING...

관련 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로