[논문]Influence of Warm Bending on the Surface Topography of Titanium Alloy Ti-6Al-4V

Patrick, D.; Marion, M.

doi:10.1016/j.proeng.2017.04.006

Influence of Warm Bending on the Surface Topography of Titanium Alloy Ti-6Al-4V 원문보기

Procedia engineering, v.183, 2017년, pp.23 - 30

Patrick, D. , Marion, M.

Abstract ▼ AI-Helper

More frequently industry reverts to titanium alloys such as Ti-6Al-4V for several applications. This is due to its wide range of positive material characteristics like high biocompatibility, good corrosion resistance and high specific strength. Hence, Ti-6Al-4V is utilized for applications in medicine technique, marine and aerospace. However, forming of Ti-6Al-4V at room temperature is limited, which is caused by its hexagonal closed packed (hcp) grain structure. To overcome these limitations it is necessary to form Ti-6Al-4V at elevated temperatures. Thus, further gliding planes are activated and large scaled parts can be formed at low cycle times. Another promising process to generate Ti-6Al-4V structures is additive manufacturing. Via Laser Beam Melting (LBM) geometrical limitations of the forming process can be overcome. Nearly every conceivable geometry like undercuts is possible to generate. However, the process takes comparatively long time and the costs for large batch sizes are high. In order to merge the advantages of forming and LBM a combination of both processes is favorable. The sequence of forming and a subsequent additive process to produce a hybrid part leads to several challenges. Besides forming induced residual stresses in the sheet metal, the topography of the sheet has effect on the bonding quality of sheet metal and additive structure. Especially peaks in roughness may serve as crack initiators. In order to provide suitable parts for the subsequent additive process it is necessary to have a sound knowledge of the impact of the forming operation on the surface topography. For this reason this paper focuses on the investigation of the influence of warm bending on the surface topography of Ti-6Al-4V. Therefore bending tests with varying temperatures, punch radii and different bending angles are conducted and the topography is analyzed with confocal microscopy.

주제어

참고문헌 (14)

G. Lutjering, J.C. Williams: Titanium. Engineering Materials, Processes. Berlin, Heidelberg: Springer-Verlag, 2007, 2. Aufl.
R. Boyer, G. Welsch, E.W. Collings: Materials properties handbook : titanium alloys. Metals Park, Ohio: ASM International, 1994.
10.1002/9783527611089 M. Peters, C. Leyens, Titan und Titanlegierungen. Weinheim: WILEY-VCH Verlag GmbH, 2002, 1. Ed. .
E.L. Odenberger, J. Hertzman, P. Thilderkvist, M. Merklein, A. Kuppert, T. Stohr et al. , Thermo-mechanical sheet metal forming of aero engine components in Ti-6Al-4V - PART 1: Material characterisation. International Journal of Material Forming, 6 (2013) 3, 391-402. .
10.1002/nme.1620260904 N. Chandra, Analysis of superplastic metal forming by a finite element method. International Journal for Numerical Methods in Engineering 26 (1988), S. 1925-1944.

상세보기
10.1007/978-3-540-39533-1 F.K. Klocke, W. Konig, Fertigungsverfahren 4, Umformen, 5. Aufl., Springer, Berlin, 2006.
10.4028/www.scientific.net/KEM.549.311 M. Merklein, H. Hagenah, M. Kaupper, A. Schaub, Mechanical response of Ti-6Al-4V alloy on deformation at moderate temperatures. In: Key Engineering Material, 549 (2013) Trans Tech Publications, S. 311-316. .

상세보기
Physics Procedia Ahuja 56 90 2014 10.1016/j.phpro.2014.08.102 Developing LBM Process Parameters for Ti-6Al-4V Thin Wall Structures and Determining the Corresponding Mechanical Characteristics

상세보기
J. Schrage, Maschinenspezifische Kostentreiber bei der additiven Fertigung mittels Laserstrahlschmelzen (LBM), presented at the Rapid.Tech - International Trade Show & Conference for Additive Manufacturing, Erfurt, 2016.
A. Schaub, B. Ahuja, M. Karg, M. Schmidt, M. Merklein: Fabrication and Characterization of Laser Beam Melted Ti-6Al-4V Geometries on Sheet Metal; In: Fraunhofer Additive Manufacturing Alliance: DDMC, 2014.
M. Merklein, P. Dubjella, A. Schaub, L. Butzhammer, M. Schmidt: Interaction of Additive Manufacturing and Forming; 6th International Conference on Additive Technologies - iCAT2016, Nuremberg, 2016, submitted.
V. Juechter, A. Schaub, M. Merklein, R.F. Singer: Titanium metal sheet structures of various wall thicknesses with additional functional elements prepared by selective electron beam melting in a powder bed, 5th International Conference on Additive Technologies - iCAT2014, Interesansa - zavod, 2014, S. 119-122.
DIN EN ISO 4287, Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture paramtes, Deutsches Institut fur Normung e.V., Berlin, Beuth Verlag, 2010.
DIN EN ISO 25178, Geometrical product specifications (GPS) - Surfce texture: Areal - Part 2: Terms, definitions and surface texture parameters, Deutsches Institut fur Normung e.V., Berlin, Beuth Verlag, 2009.

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Influence of Warm Bending on the Surface Topography of Titanium Alloy Ti-6Al-4V 원문보기

Abstract ▼ AI-Helper

주제어

참고문헌 (14)

이 논문을 인용한 문헌

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

연관된 기능

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트