[논문]Qualification of Hairpin Motors Insulation for Automotive Applications

Mancinelli, Paolo; Stagnitta, Simone; Cavallini, Andrea

doi:10.1109/TIA.2016.2619670

Qualification of Hairpin Motors Insulation for Automotive Applications 원문보기

IEEE transactions on industry applications, v.53 no.3 pt.2, 2017년, pp.3110 - 3118

Mancinelli, Paolo , Stagnitta, Simone , Cavallini, Andrea

Abstract ▼ AI-Helper

This paper is focused on the reliability evaluation of an electric vehicle (EV) motor based on hairpin technology. Besides bearings (not discussed here), the weak point of an electric motor is its insulating system. For inverter-fed motors, the inception of partial discharges might lead to failure in a matter of days, and thus, deserves particular attention. Qualification and lifetime evaluation of inverter-fed machines are described in IEC 60034-18-41, which specifies accelerated aging procedures and considers partial discharge inception as the end-of-life criterion. This standard was used as a reference for this paper. The only exception is that insulation models were subjected to the mechanical stress profile reported in the ISO 16750-3-2012 standard since an automotive motor is subject to significant vibrations during its operation. From the tests performed, we observed that, with the hairpin technology, turn-to-turn is the weakest link in the insulation system. All the insulation models were partial discharge (PD) free from the beginning of the tests to breakdown and the root cause for breakdown was, in all cases, traced back to cracks on the surface of the insulation. This suggests that, depending on insulating enamel thickness and conductor geometry, some insulation systems are intrinsically PD free by design, despite the effect of aging. Considering the severe vibration profiles typical of EVs, and the principal breakdown mechanism (cracking of the insulation), mechanical stress coupled with thermal stress appears as the main aging driver. Therefore, this paper spotlights the lack of proper standards for the qualification of automotive electric motors and hints at the possibility that IEC 60034-18-41 considers dealing with motors that might be intrinsically partial discharge free even after long-term exposure to operational stresses.

참고문헌 (25)

Dymond, J.H., Stranges, N., Younsi, K., Hayward, J.E.. Stator winding failures: contamination, surface discharge, tracking. IEEE transactions on industry applications, vol.38, no.2, 577-583.

상세보기
10.1049/ic:19950269
Hirose, Hideo. A Method to Estimate the Lifetime of Solid Electrical Insulation. IEEE transactions on electrical insulation, vol.ei22, no.6, 745-753.

상세보기
Kaufhold, M., Aninger, H., Berth, M., Speck, J., Eberhardt, M.. Electrical stress and failure mechanism of the winding insulation in PWM-inverter-fed low-voltage induction motors. IEEE transactions on industrial electronics : a publication of the IEEE Industrial Electronics Society, vol.47, no.2, 396-402.

상세보기
High-Voltage Test Techniques—Partial Discharge Measurements 2000
Kerkman, R.J., Leggate, D., Skibinski, G.L.. Interaction of drive modulation and cable parameters on AC motor transients. IEEE transactions on industry applications, vol.33, no.3, 722-731.

상세보기
Cavallini, Andrea, Fabiani, Davide, Montanari, Gian. Power electronics and electrical insulation systems ߝ Part 1: Phenomenology overview. IEEE electrical insulation magazine : a publication of the IEEE Electrical Insulation Society, vol.26, no.3, 7-15.

상세보기
Cavallini, Andrea, Fabiani, Davide, Montanari, Gian Carlo. Power electronics and electrical insulation systems - part 2: life modeling for insulation design. IEEE electrical insulation magazine : a publication of the IEEE Electrical Insulation Society, vol.26, no.4, 33-39.

상세보기
Partial Discharge Free Electrical Insulation Systems (Type I) Used in Rotating Electrical Machines Fed From Voltage Converters—Qualification and Quality Control Tests 2014
Functional Evaluation of Insulation Systems—Test Procedures for Wire-Wound Windings—Thermal Evaluation and Classification 2012
10.1109/IEMDC.2015.7409222
10.4271/2016-01-1235
10.24084/repqj14.256
Int J Life Cycle Assessment Environmental impact of traction electric motors for electric vehicles applications hernandez 2015 1
10.1109/9780470544778
10.1201/9781420030389
2015
Electrical Insulation for Rotating Machines Design Evaluation Aging Testing and Repair stone 2004
Weiss, M., Bonnel, P., Kuhlwein, J., Provenza, A., Lambrecht, U., Alessandrini, S., Carriero, M., Colombo, R., Forni, F., Lanappe, G., Le Lijour, P., Manfredi, U., Montigny, F., Sculati, M.. Will Euro 6 reduce the NO_x emissions of new diesel cars? - Insights from on-road tests with Portable Emissions Measurement Systems (PEMS). Atmospheric environment, vol.62, 657-665.

상세보기
Evaluation and Qualification of Electrical Insulation Systems 2011
Cavallini, A, Fabiani, D, Montanari, G C. Power electronics and electrical insulation systems - Part 3: Diagnostic properties. IEEE electrical insulation magazine : a publication of the IEEE Electrical Insulation Society, vol.26, no.5, 30-40.

상세보기
Road Vehicles—Environmental Conditions and Testing for Electrical and Electronic Equipment—Part 3 Mechanical Loads 2012
Escobar, Luis A., Meeker, William Q.. A Review of Accelerated Test Models. Statistical science : a review journal of the Institute of Mathematical Statistics, vol.21, no.4,

상세보기
Stone, G.C.. Partial discharge diagnostics and electrical equipment insulation condition assessment. IEEE transactions on dielectrics and electrical insulation : a publication of the IEEE Dielectrics and Electrical Insulation Society, vol.12, no.5, 891-904.

상세보기
10.1109/ICD.2016.7547528

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Qualification of Hairpin Motors Insulation for Automotive Applications 원문보기

Abstract ▼ AI-Helper

참고문헌 (25)

이 논문을 인용한 문헌

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트