최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Construction & building materials, v.154, 2017년, pp.504 - 513
Mohammed, Alyaa (Department of Civil and Construction Engineering, Swinburne University of Technology, PO Box 218, Victoria 3122, Australia) , Al-Saadi, Nihad Tareq Khshain (Department of Civil and Construction Engineering, Swinburne University of Technology, PO Box 218, Victoria 3122, Australia) , Al-Mahaidi, Riadh (Department of Civil and Construction Engineering, Swinburne University of Technology, PO Box 218, Victoria 3122, Australia)
Abstract Efficient transfer of load between concrete substrate and fibre reinforced polymer (FRP) by the bonding agent is the key factor in any FRP strengthening system. An innovative high-strength self-compacting non-polymer cementitious adhesive (IHSSC-CA) was recently developed by the authors an...
J. Compos. Constr. Taljsten 11 2 120 2007 10.1061/(ASCE)1090-0268(2007)11:2(120) Mineral-based bonding of carbon FRP to strengthen concrete structures
Compos. Struct. Gamage 75 1 199 2006 10.1016/j.compstruct.2006.04.068 Bond characteristics of CFRP plated concrete members under elevated temperatures
Compos. Struct. Ombres 94 1 143 2011 10.1016/j.compstruct.2011.07.008 Flexural analysis of reinforced concrete beams strengthened with a cement based high strength composite material
J. Compos. Constr. D’Ambrisi 15 5 707 2011 10.1061/(ASCE)CC.1943-5614.0000218 Flexural strengthening of RC beams with cement-based composites
Constr. Build. Mater. Hashemi 26 1 268 2012 10.1016/j.conbuildmat.2011.06.021 Experimental and finite element analysis of flexural behavior of FRP-strengthened RC beams using cement-based adhesives
Aust. J. Struct. Eng. Al-Saadi 17 1 28 2016 10.1080/13287982.2015.1116180 Bond behaviour between NSM CFRP strips and concrete substrate using single-lap shear testing with cement-based adhesives
Constr. Build. Mater. Park 23 1 434 2009 10.1016/j.conbuildmat.2007.11.003 Drying effect of polymer-modified cement for patch-repaired mortar on constraint stress
Mater. Res. Reis 15 4 645 2012 10.1590/S1516-14392012005000091 Effect of temperature on the mechanical properties of polymer mortars
Constr. Build. Mater. Rashid 94 414 2015 10.1016/j.conbuildmat.2015.07.035 Experimental and analytical investigations on the behavior of interface between concrete and polymer cement mortar under hydrothermal conditions
Constr. Build. Mater. Mohammed 127 872 2016 10.1016/j.conbuildmat.2016.10.066 Bond behaviour between NSM CFRP strips and concrete at high temperature using innovative high-strength self-compacting cementitious adhesive (IHSSC-CA) made with graphene oxide
Compos. Struct. Al-Saadi 160 392 2017 10.1016/j.compstruct.2016.10.084 Performance of RC beams rehabilitated with NSM CFRP strips using innovative high-strength self-compacting cementitious adhesive (IHSSC-CA) made with graphene oxide
Compos. Struct. Al-Saadi 163 44 2017 10.1016/j.compstruct.2016.12.015 Fatigue performance of NSM CFRP strips embedded in concrete using innovative high-strength self-compacting cementitious adhesive (IHSSC-CA) made with graphene oxide
J. Mater. Civ. Eng. Mohammed 04016258 2016 Utilization of graphene oxide to synthesis high-strength cement-based adhesive
A. Al-Abdwais, R. Al-Mahaidi, K. Abdouka, 2013. Modified cement-based adhesive for near-surface mounted CFRP strengthening system, in: Proceedings of the 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), Melbourne, Australia, pp. 1-8.
ACI Struct. J. De Lorenzis 99 2 123 2002 Bond between near surface mounted FRP rods and concrete in structural strengthening
Cem. Concr. Res. De Belie 40 12 1723 2010 10.1016/j.cemconres.2010.08.014 Influence of pozzolans and slag on the microstructure of partially carbonated cement paste by means of water vapour and nitrogen sorption experiments and BET calculations
Constr. Build. Mater. Santos 21 8 1688 2007 10.1016/j.conbuildmat.2006.05.044 Correlation between concrete-to-concrete bond strength and the roughness of the substrate surface
Constr. Build. Mater. Santos 38 912 2013 10.1016/j.conbuildmat.2012.09.045 A state-of-the-art review on roughness quantification methods for concrete surfaces
Constr. Build. Mater. Hoła 84 111 2015 10.1016/j.conbuildmat.2015.03.014 Usefulness of 3D surface roughness parameters for nondestructive evaluation of pull-off adhesion of concrete layers
Constr. Build. Mater. Erdem 40 70 2013 10.1016/j.conbuildmat.2012.11.013 Fractal-fracture analysis and characterization of impact-fractured surfaces in different types of concrete using digital image analysis and 3D nanomap laser profilometery
Cem. Concr. Res. Ficker 40 6 947 2010 10.1016/j.cemconres.2010.02.002 Roughness of fracture surfaces and compressive strength of hydrated cement pastes
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.