최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Materials today: proceedings, v.4 no.8, 2017년, pp.8498 - 8506
Ponnusamy, P. , Masood, S.H. , Palanisamy, S. , Rahman Rashid, R.A. , Ruan, D.
Additive manufacturing (AM) has revolutionized the way that engineering products are created through a simple concept of layer by layer addition of a part. Metallic components and its alloys have attracted worldwide attention due to the near net shape output and for the challenges posed in arriving ...
The International Journal of Advanced Manufacturing Technology Pupo 80 5-8 985 2015 10.1007/s00170-015-7040-3 Influence of process parameters on surface quality of CoCrMo produced by selective laser melting
Gibson 2010 Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Chinese Optics Letters Weihui 5 1 37 2007 Direct manufacturing of Cu-based alloy parts by selective laser melting
A. Spierings et al. Designing material properties locally with additive manufacturing technology SLM, 23rd Annual International Solid Free Form Fabrication (SFF) Symposium, Austin, Texas, SFF-2012, pp. 447-455.
10.1108/RPJ-04-2013-0045 A. Spierings et al. (2014). Optimization of SLM productivity by aligning 17-4PH material properties on part requirements, Rapid Prototyping Journal, 20(6)(2014) 444-448.
Optics and Laser Technology Lu 75 197 2015 10.1016/j.optlastec.2015.07.009 Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy
J Eng Manuf Childs 219 339 2005 10.1243/095440505X8109 Selective laser sintering (melting) of stainless and tool steel powders: experiments and modeling
Int J Adv Manuf Technol Wang 58 1189 2012 10.1007/s00170-011-3443-y Study on energy input and its influences on single track, multi-track and multi-layer in SLM
The International Journal of Advanced Manufacturing Technology Su 64 9-12 1231 2013 10.1007/s00170-012-4081-8 An investigation into direct fabrication of fine-structured components by selective laser melting
Advanced Materials Research Xinsong 287-290 2456 2011 Auto-Control of Defocus distance during Filling Laser Welding of Ti-Alloy with Wire
Advanced Materials Research Sun 287-290 2419 2011 Effect of defocus distance on Layer Quality in Insider-Laser Coaxial Powder Feeding Laser Cladding
Optics and Lasers in Engineering Zhao 59 11 2014 10.1016/j.optlaseng.2014.02.010 Effect of defocusing distance on the contaminated surface of brass ring with nanosecond laser in a 3D laser scanning system
Material Research Chuenarrom 12 473 2009 10.1590/S1516-14392009000400016 Effect of indentation load and time on Knoop and Vickers microshardness tests for Enamel and Dentin
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.