참고문헌 (20)

1. Journal of Physics D: Applied Physics Mahrle 42 17 175507 2009 10.1088/0022-3727/42/17/175507 Theoretical aspects of fibre laser cutting 

   상세보기

2. Modeling and Simulation: Three Keys Towards Mastering the Cutting Process with Fiber, Disk and Diode Lasers, Physics Procedia Petring 39 186 2012 Diagnostics 

3. 10.1016/j.phpro.2014.08.104 Karel Kellens, Goncalo Costa Rodrigues, Wim Dewulf, Energy and Resource Efficiency of Laser Cutting Processes, 8th International Conference on Photonic Technologies, LANE, 2014, pp. 854？864. 

   상세보기

4. 18th CIRP Conference on Electro Physical and Chemical Mashining, ISEM？2016, Tokio, Procedia CIRP Kochergin 42 470 2016 Surface manufacturing under pulse fiber laser 

5. Izvestiya MGTU “MAMI” Saushkin 2 242 2012 Prospects for further development and use of physical and chemical methods and technologies in engine manufacture 

6. Proceedings of ISEM - XVI - International Symposium on Electro- Machining Kovalenko 443 2010 Research on Laser Micromachining at Medical Stents Manufacturing 

7. Proceedings of ISEM-XV - International Symposium on Electro-Machining Vasco 427 2007 Processing Conditions of Laser Micro-Milling 

8. T. Dobrev, D. Pham, S. Dimov, A simulation model for crater formation in laser milling, Multi-Materials Micro Manufacture, Elsevier Ltd., 2005, pp. 1-4. 

9. J. Phys. D: Appl. Phys Ben-Yakar 40 1447 2007 10.1088/0022-3727/40/5/021 Thermal and fluid processes of a thin melt zone during femtosecond laser ablation of glass: the formation of rims by single laser pulses 

   상세보기

10. CIRP Annals - Manufacturing Technology Meijer 51 531 2002 10.1016/S0007-8506(07)61699-0 Laser Machining by short and ultrashort pulses, state of the art and new opportunities in the age of the photons 

    상세보기

11. Vaks 696 2013 The practice of precision laser processing 

12. Morgunov 928 2013 High-technology engineering production 

13. Science and Research journal “STIN” Kochergin 10 33 2015 Features of dross formation under the pulse laser cutting of thin-walled workpieces 

14. Russian Engineering Research Kochergin 36 414 2016 10.3103/S1068798X16050087 Flash Formation in the Pulsed Laser Cutting of Thin-Walled Workpieces 

    상세보기

15. Journal of Hardening and coating technology Kochergin 12 37 2015 Forming features of the single crater under the influence of the impulse of laser radiation on the material 

16. PIMM Laboratory (Arts et Metiers Paris Tech-CNRS), Paris, France Hirano 44 10 105502 2011 Experimental investigation of hydrodynamics of hydrodynamics of melt layer during laser cutting of steel 

17. 2 International Conference on Advanced Design and Manufacture (ADM 2009) Run 419 409 2012 Flow field analysis of gas jest from nozzles for gas-assisted laser cutting 

18. A.P.Husu, Yu.G.Vittenberg, V.A. Palmov, The surface roughness (theoretical probabilistic approach), Science, 1975, 344 p. 

19. Engineering magazine Kochergin 2 3 2016 Research of process of the laser cutting of stainless steel Cr18Ni10Ti: Reference book 

20. Naukoyomkie tekhnologii v mashinostroenii Kochergin 55 43 2016 High Tech reduction of dross formation under the pulse laser cutting of sheet material