최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Engineering fracture mechanics, v.185, 2017년, pp.227 - 240
Pessoa, D.F. (Institut fü) , Herwig, P. (r Werkstoffwissenschaft, Technische Universitä) , Wetzig, A. (t Dresden, 01069 Dresden, Germany) , Zimmermann, M. (Fraunhofer-Institut fü)
Abstract Austenitic steels are among the stainless steels the most common used type of material to produce sheet metal parts which can be manufactured by laser beam cutting in a useful manner. However, the use of this technique to manufacture structural thick parts is restricted due to the creation...
Caristan 2004 Laser cutting guide for manufacturing
Ion 2005 Laser processing of engineering materials
Gabzdyl vol. 1 161 1989 Proceedings of the 2nd nordic laser materials processing conference Quality and performance in laser cutting
Eng Struct Cicero 111 152 2016 10.1016/j.engstruct.2015.12.004 Fatigue behaviour of structural steels with oxy-fuel, plasma and laser cut straight edges. Definition of eurocode 3 FAT classes
Mat Test Mateo 57 136 2015 10.3139/120.110686 Influence of laser cutting on the fatigue limit of two high strength steels
Dittmann vol. 1 37 2015 Advances in materials testing for research and practice Influence of the cutting edge condition on the fatigue behavior of steel sheets under strain controlled loading
J Constr Steel Res Thomas 121 40 2016 10.1016/j.jcsr.2016.01.013 Optimizing laser cut-edge durability for steel structures in high stress applications
Eng Struct Lara 213 1908 2013 Effect of the cutting process on the fatigue behaviour of press hardened and high strength dual phase steels
J Laser Appl Manohar 18 101 2006 10.2351/1.2193173 CO2 laser beam cutting of steels: materials issues
J Laser Appl Manohar 17 211 2005 10.2351/1.2080327 Effect of steel composition on the laser cutting behavior of 25-mm-thick plates
Phys Procedia Orishich 56 875 2014 10.1016/j.phpro.2014.08.106 Experimental comparison of laser cutting of steel with fiber and CO2 lasers on the basis of minimal roughness
J Mater Process Technol Yilbas 155-156 2106 2004 10.1016/j.jmatprotec.2004.04.194 Laser cutting quality assessment and thermal efficiency analysis
Phys Procedia Goppold 56 892 2014 10.1016/j.phpro.2014.08.108 Experimental analysis for improvements of process efficiency and cut edge quality of fusion cutting with 1μm laser radiation
Opt Laser Technol Eltawahni 44 1068 2012 10.1016/j.optlastec.2011.10.008 Effectof CO2 laser cutting process parameters on edge quality and operating cost of AISI316L
Eguchi 2000 International congress on applications of lasers and electro-optics (ICALEO) Experimental study on high-speed cutting of thick stainless steel 4kW CO2 laser
Caristan 2003 International congress on applications of lasers and electro-optics (ICALEO) Laser beam propagation caustics through bifocal lenses
J Mater Process Technol Thomas 211 263 2011 10.1016/j.jmatprotec.2010.09.018 The influence of mechanical and CO2 laser cut-edge characteristics on the fatigue life performance of high strength automotive steels
Phys Procedia Stelzer 41 399 2013 10.1016/j.phpro.2013.03.093 Experimental investigations on fusion cutting stainless steel with fiber and CO2 laser beams
ISO 9013:2002 2002 Classification of thermal cutting: geometrical product specification and quality tolerances
Int J Fatigue Cremer 57 120 2013 10.1016/j.ijfatigue.2012.10.012 High-frequency cyclic testing of welded aluminium alloy joints in the region of very high cycle fatigue (VHCF)
Pilkey 2008 Stress concentration factors
Marshall 1984 Austenitic stainless steels: microstructure and mechanical properties
Mater Sci Eng A Stolarz 319-321 521 2001 10.1016/S0921-5093(01)01072-3 Fatigue short crack behaviour in metastable austenitic stainless steels with different grain sizes
Bollenhagen 2011 Deformation-induced martensite transformation by multi-stage deformation and its utilization to optimize the HCF and VHCF properties of austenitic stainless steel sheets
Mater Sci Eng A Krupp 481-482 713 2008 10.1016/j.msea.2006.12.211 Deformation-induced martensite formation during cyclic deformation of metastable austenitic steel: influence of temperature and carbon content
J Am Stat Assoc Dixon 43 108 1948 10.1080/01621459.1948.10483254 A method for obtaining and analyzing sensitivity data
EN 10088-1:2014 2014 Stainless steels - Part 1: list of the stainless steels
J Iron Steel Inst Cook 171 345 1952 The constitution of iron-nickel-chromium alloys at 550-800°C
Pickering 2 1984 Proceedings of the conference on stainless steels Physical metallurgical development of stainless steels
Murakami 2002 Metal fatigue: effects of small defects and nonmetallic inclusions
Procedia Eng Pessoa 160 175 2016 10.1016/j.proeng.2016.08.878 Influence of notch effects created by laser cutting process on fatigue behavior of metastable austenitic stainless steel
Wetzig vol. 1 4 2015 Proceedings of the 3rd international conference on laser and plasma application in materials science, Kolkata New progress in laser cutting
Birkett vol. 1 63 1985 Proceedings of the 2nd International conference lasers in manufacturing Prevention of dross attachment during laser cutting
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.