최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of applied sciences, v.11 no.3, 2011년, pp.549 - 554
Rahman, M.M. , Khan, M.A.R. , Kadirgama, K. , Noor, M.M. , Bakar, R.A.
초록이 없습니다.
Bojorquez, B., Marloth, R.T., Es-Said, O.S.. Formation of a crater in the workpiece on an electrical discharge machine. Engineering failure analysis, vol.9, no.1, 93-97.
Chow, H.M., Yang, L.D., Lin, C.T., Chen, Y.F.. The use of SiC powder in water as dielectric for micro-slit EDM machining. Journal of materials processing technology, vol.195, no.1, 160-170.
Kansal, H.K., Singh, S., Kumar, P.. Effect of Silicon Powder Mixed EDM on Machining Rate of AISI D2 Die Steel. Journal of manufacturing processes, vol.9, no.1, 13-22.
Kiyak, M., Cakir, O.. Examination of machining parameters on surface roughness in EDM of tool steel. Journal of materials processing technology, vol.191, no.1, 141-144.
Mandal, D., Pal, S.K., Saha, P.. Modeling of electrical discharge machining process using back propagation neural network and multi-objective optimization using non-dominating sorting genetic algorithm-II. Journal of materials processing technology, vol.186, no.1, 154-162.
Mohan, B., Rajadurai, A., Satyanarayana, K.G.. Electric discharge machining of Al–SiC metal matrix composites using rotary tube electrode. Journal of materials processing technology, vol.153, 978-985.
Puertas, I., Luis, C.J.. A study on the machining parameters optimisation of electrical discharge machining. Journal of materials processing technology, vol.143, 521-526.
Singh, Shankar, Maheshwari, S., Pandey, P.C.. Some investigations into the electric discharge machining of hardened tool steel using different electrode materials. Journal of materials processing technology, vol.149, no.1, 272-277.
Theisen, W, Schuermann, A. Electro discharge machining of nickel–titanium shape memory alloys. Materials science & engineering. properties, microstructure and processing. A, Structural materials, vol.378, no.1, 200-204.
Tsai, Y.Y., Tseng, C.H., Chang, C.K.. Development of a combined machining method using electrorheological fluids for EDM. Journal of materials processing technology, vol.201, no.1, 565-569.
Wang, Pei-Jen, Tsai, Kuo-Ming. Semi-empirical model on work removal and tool wear in electrical discharge machining. Journal of materials processing technology, vol.114, no.1, 1-17.
Wu, Kun Ling, Yan, Biing Hwa, Lee, Jyh-Wei, Ding, Chun Gian. Study on the characteristics of electrical discharge machining using dielectric with surfactant. Journal of materials processing technology, vol.209, no.8, 3783-3789.
Wu, Kun Ling, Yan, Biing Hwa, Huang, Fuang Yuan, Chen, Shin Chang. Improvement of surface finish on SKD steel using electro-discharge machining with aluminum and surfactant added dielectric. International journal of machine tools & manufacture, vol.45, no.10, 1195-1201.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.