최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of alloys and compounds, v.749, 2018년, pp.146 - 154
Arthanari, Srinivasan (Corresponding author.) , Jang, Jae Cheol , Shin, Kwang Seon
Abstract Corrosion behavior of high pressure die-cast Al-Si-Ni alloys (Al-3Si-1Ni (SN31) and Al-3Si-3Ni (SN33)) with and without copper (Cu) addition has been investigated. Corrosion behavior was assessed in 3.5 wt% NaCl by electrochemical and immersion corrosion techniques. The presence of single ...
J. Mater. Eng. Performance Pramod 24 6 2185 2015 10.1007/s11665-015-1424-2 Aluminum-based cast in-situ composites: a review
Int. J. Sci. Res. Rana 2 6 1 2012 Reviews on the influences of alloying elements on the microstructure and mechanical properties of Aluminum alloys and Aluminum alloy composites
J. Alloys Compd. Aversa 695 1470 2017 10.1016/j.jallcom.2016.10.285 A study of the microstructure and the mechanical properties of an Al-Si-Ni alloy produced via selective laser melting
Met. Mater. Int. So 21 5 842 2015 10.1007/s12540-015-5247-3 Effects of T6-treatment on the defect susceptibility of tensile strength to microporosity variation in low pressure die-cast A356 alloy
Mater. Sci. Eng. Lee 599 223 2014 10.1016/j.msea.2014.01.091 Constitutive prediction of the defect susceptibility of tensile properties to microporosity variation in A356 aluminum alloy
Wear Das 264 47 2008 10.1016/j.wear.2007.01.039 Synergic effect of reinforcement and heat treatment on the two body abrasive wear of an Al-Si alloy under varying loads and abrasive sizes
Mater. Des. Zamani 86 361 2015 10.1016/j.matdes.2015.07.084 High temperature tensile deformation behavior and failure mechanisms of an Al-Si-Cu-Mg cast alloy-The microstructural scale effect
Mater. Des. Ceschini 83 626 2015 10.1016/j.matdes.2015.06.031 Effect of microstructure and overaging on the tensile behavior at room and elevated temperature of C355-T6 cast aluminum alloy
Trans. Nonferrous Metals Soc. China Zeren 21 1698 2011 10.1016/S1003-6326(11)60917-5 Influence of Cu addition on microstructure and hardness of near-eutectic Al-Si-xCu alloys
Mater. Res. Prieto 19 Suppl. 1 59 2016 10.1590/1980-5373-mr-2015-0673 Evolution of microstructure in Al-Si-Cu system modified with a transition element addition and its effect on hardness
Mater. Sci. Eng. A Jiang 597 237 2014 10.1016/j.msea.2014.01.009 Effects of rare earth elements addition on microstructures, tensile properties and fractography of A357 alloy
Mater. Sci. Eng. A Zamani 693 42 2017 10.1016/j.msea.2017.03.084 The role of transition metal additions on the ambient and elevated temperature properties of Al-Si alloys
Dieter vol. 3 1986
J. Mater. Process. Technol. Shabestari 153 193 2004 10.1016/j.jmatprotec.2004.04.302 Effect of copper and solidification conditions on the microstructure and mechanical properties of Al-Si-Mg alloys
Mater. Sci. Appl. Seifeddine 4 171 2013 On the role of copper and cooling rates on the microstructure, defect formations and mechanical properties of Al-Si-Mg alloys
Adv. Eng. Mater. Rakhmonov 18 7 1096 2016 10.1002/adem.201500468 The effect of transition elements on high-temperature mechanical properties of Al-Si foundry alloys - a review
Davis 351 2001 Light Metals and Alloys, Alloying: Understanding the Basics
Mater. Sci. Eng. Wang 528 18 5764 2011 10.1016/j.msea.2011.03.102 Microstructure and mechanical properties of Al-Si-Ni-Ce alloys prepared by gas-atomization spark plasma sintering and hot-extrusion
Trans. Nonferrous Metals Soc. China Donatus 27 55 2017 10.1016/S1003-6326(17)60006-2 Corrosion pathways in aluminium alloys
Corros. Sci. Liang 76 119 2013 10.1016/j.corsci.2013.06.035 General aspects related to the corrosion of 6xxx series aluminium alloys: exploring the influence of Mg/Si ratio and Cu
Electrochim. Acta Kairy 190 92 2016 10.1016/j.electacta.2015.12.098 Exploring the electrochemistry of 6xxx series aluminium alloys as a function of Si to Mg ratio, Cu content, ageing conditions and microstructure
Electrochim. Acta Huang 199 242 2016 10.1016/j.electacta.2016.03.125 Dependence on temperature, pH, and Cl? in the uniform corrosion of aluminum alloys 2024-T3, 6061-T6, and 7075-T6
Mater. Sci. Forum Mendez 691 10 2011 10.4028/www.scientific.net/MSF.691.10 Effect of Nickel addition on microstructure and mechanical properties of Aluminum-based alloys
Croat. Chem. Acta Peric 67 289 1994 Studies of corrosion resistance of passive layers on Al-Ni alloys in the presence of chloride ions
Electrochem. Acta Osorio 55 4078 2010 10.1016/j.electacta.2010.02.029 Electrochemical corrosion characterization of Al-Ni alloys in a dilute sodium chloride solution
J. Alloys Compd. Wen 695 2424 2017 10.1016/j.jallcom.2016.11.138 Effect of phase composition and microstructure on the corrosion resistance of Ni-Al intermetallic compounds
Corros. Sci. Technol. Arthanari 16 3 100 2017 Corrosion behavior of high pressure die-cast Al-Ni and Al-Ni-Ca alloys in 3.5% NaCl solution
Fabrichnaya vol. 11A3 1 2005 Aluminium - nickel - silicon
Prince vol. 11A2 1 2005 Aluminium - copper - nickel
Acta Mater. Yu 51 12 3445 2003 10.1016/S1359-6454(03)00165-4 Formation of nanostructured eutectic network in α-Al2O3 reinforced Al-Cu alloy matrix composite
Corros. Sci. Little 49 347 2007 10.1016/j.corsci.2006.04.024 An electrochemical framework to explain the intergranular stress corrosion behavior in two Al-Cu-Mg-Ag alloys as a function of aging
Scripta Mater. Aburada 58 623 2008 10.1016/j.scriptamat.2007.11.041 Effect of Ni as a minority alloying element on the corrosion behavior in Al-Cu-Mg-(Ni) metallic glasses
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.