다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Journal of manufacturing processes, v.32, 2018년, pp.625 - 634
Mugada, Krishna Kishore (Corresponding author.) , Adepu, Kumar
AI-Helper
Abstract In the present paper, the flow of stirred material under ridges shoulder combined with various polygonal pin profiles during friction stir welding (FSW) of 6082 aluminum alloy was investigated through marker insert technique. The marker inserts (copper) were placed in ‘parallel to/al...
Olson vol. 6 2016 ASM handbook
Mater Des Thomas 18 269 1997 10.1016/S0261-3069(97)00062-9 Friction stir welding for the transportation industries
Prog Mater Sci Nandan 53 980 2008 10.1016/j.pmatsci.2008.05.001 Recent advances in friction-stir welding - process, weldment structure and properties
Mishra 368 2007 Friction stir welding processing
Model Simul Mater Sci Eng Schmidt 12 143 2004 10.1088/0965-0393/12/1/013 An analytical model for the heat generation in friction stir welding
J Mater Process Technol Galvao 213 129 2013 10.1016/j.jmatprotec.2012.09.016 Influence of tool shoulder geometry on properties of friction stir welds in thin copper sheets
Sci Technol Weld Join Cederqvist 14 178 2009 10.1179/136217109X400420 Improved process stability during friction stir welding of 5 cm thick copper canisters through shoulder geometry and parameter studies
Mater Des Scialpi 28 1124 2007 10.1016/j.matdes.2006.01.031 Influence of shoulder geometry on microstructure and mechanical properties of friction stir welded 6082 aluminium alloy
Mater Sci Eng A Leal 498 384 2008 10.1016/j.msea.2008.08.018 Material flow in heterogeneous friction stir welding of thin aluminium sheets: effect of shoulder geometry
Mater Des Elangovan 29 362 2008 10.1016/j.matdes.2007.01.030 Influences of tool pin profile and tool shoulder diameter on the formation of friction stir processing zone in AA6061 aluminium alloy
Mater Manuf Process Elangovan 23 251 2008 10.1080/10426910701860723 Effect of tool pin profile and tool rotational speed on mechanical properties of friction stir welded AA6061 aluminium alloy
Proc Inst Mech Eng Part B J Eng Manuf Biswas 226 641 2012 10.1177/0954405411424111 Friction stir welding of aluminum alloy with varying tool geometry and process parameters
Mater Des Khodaverdizadeh 45 265 2013 10.1016/j.matdes.2012.09.010 Effect of tool pin profile on microstructure and mechanical properties of friction stir welded pure copper joints
Mater Des Imam 44 23 2013 10.1016/j.matdes.2012.07.046 Effect of weld morphology on mechanical response and failure of friction stir welds in a naturally aged aluminium alloy
Sci Technol Weld Join Mehta 19 534 2014 10.1179/1362171814Y.0000000221 Material adhesion and stresses on friction stir welding tool pins
Def Technol Mehta 11 229 2015 10.1016/j.dt.2015.05.001 Numerical modeling of friction stir welding using the tools with polygonal pins
Def Technol Venkata Rao 11 123 2015 10.1016/j.dt.2014.10.003 Microstructure and pitting corrosion resistance of AA2219 Al-Cu alloy friction stir welds - effect of tool profile
Meas J Int Meas Confed Amirafshar 68 111 2015 10.1016/j.measurement.2015.02.051 Effect of tool pin design on the microstructural evolutions and tribological characteristics of friction stir processed structural steel
J Inst Eng Ser C Mugada 2018 Role of tool shoulder end features on friction stir weld characteristics of 6082 aluminum alloy
J Mater Eng Perform Ramanjaneyulu 22 2224 2013 10.1007/s11665-013-0512-4 Structure-Property correlation of AA2014 friction stir welds: role of tool pin profile
Sci Technol Weld Join Le 15 694 2010 10.1179/136217110X12813393169453 Effect of joint line remnant on fatigue lifetime of friction stir welded Al-Cu-Li alloy
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.