최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Science and technology of welding and joining, v.20 no.4, 2015년, pp.313 - 318
Tan, W. (Center for Laser Based Manufacturing, Purdue University, West Lafayette, IN, 47907, USA) , Shin, Y. C. (Center for Laser Based Manufacturing, Purdue University, West Lafayette, IN, 47907, USA)
An investigation based on both experimental and numerical approaches is presented in this paper on laser keyhole welding processes to join stacks consisting of multiple stainless steel plates. The welding parameters are shown to be decisive factors for weld penetration depth and welding productivit...
Department of Energy: ‘Roadmap on Manufacturing R&D for the Hydrogen Economy’. available at http://www.hydrogen.energy.gov/pdfs/roadmap_manufacturing_hydrogen_economy.pdf (accessed 2 December 2011).
Fuel Cell Gabzdyl J. 34 7 2007
Caiazzo, F., Curcio, F., Daurelio, G., Memola Capece Minutolo, F.. Ti6Al4V sheets lap and butt joints carried out by CO2 laser: mechanical and morphological characterization. Journal of materials processing technology, vol.149, no.1, 546-552.
Kim, C., Kim, J., Lim, H., Kim, J.. Investigation of laser remote welding using disc laser. Journal of materials processing technology, vol.201, no.1, 521-525.
Benasciutti, D., Lanzutti, A., Rupil, G., Fraenkel Haeberle, E.. Microstructural and mechanical characterisation of laser-welded lap joints with linear and circular beads in thin low carbon steel sheets. Materials & design, vol.62, 205-216.
Tan, W., Bailey, N.S., Shin, Y.C.. A novel integrated model combining Cellular Automata and Phase Field methods for microstructure evolution during solidification of multi-component and multi-phase alloys. Computational materials science, vol.50, no.9, 2573-2585.
Tan, Wenda, Bailey, Neil S, Shin, Yung C. Investigation of keyhole plume and molten pool based on a three-dimensional dynamic model with sharp interface formulation. Journal of physics. D, applied physics, vol.46, no.5, 055501-.
Tan, Wenda, Shin, Yung C. Analysis of multi-phase interaction and its effects on keyhole dynamics with a multi-physics numerical model. Journal of physics. D, applied physics, vol.47, no.34, 345501-.
Comput. Mater. Sci Tan W. 2014
Lambert, M. A., Fletcher, L. S.. Review of Models for Thermal Contact Conductance of Metals. Journal of thermophysics and heat transfer, vol.11, no.2, 129-140.
Yovanovich, M.M.. Four decades of research on thermal contact, gap, and joint resistance in microelectronics. IEEE transactions on components and packaging technologies : a publication of the IEEE Components, Packaging, and Manufacturing Technology Society, vol.28, no.2, 182-206.
Antunes, R.A., Oliveira, M.C.L., Ett, G., Ett, V.. Corrosion of metal bipolar plates for PEM fuel cells: A review. International journal of hydrogen energy, vol.35, no.8, 3632-3647.
Mele, C., Bozzini, B.. Localised corrosion processes of austenitic stainless steel bipolar plates for polymer electrolyte membrane fuel cells. Journal of power sources, vol.195, no.11, 3590-3596.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.