최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Applied mechanics and materials, v.401/403, 2013년, pp.867 - 870
Xu, Wu Jiao (Chongqing University) , Zhai, Chun Hai (Chongqing University) , Li, Wu Hua (Chongqing University)
In this article, the influence of different process parameters on the bottom thickness of CNG container during the deep drawing and ironing process has been analyzed by simulation. The bottom die fillet R, the spacer height H between blank holder and bottom die and the friction coefficient μ betw...
F. Yoshida. Deformation and fracture of sheet metal laminates in plastic forming, J. Proceedings of 4th international conference on composite engineering. (1997) 61-64.
J. Cao, X. Wang, F.A. Mills. Characterization of sheet buckling phenomenon subjected to controlled boundary con-straints, J. ASME J Manuf Sci Eng. 124 (2002) 493-501. 10.1115/1.1475990
J. Gresham, W. Cantwell, M.J. Cardew-Hall, P. Compston, S. Kalyanasundaram. Drawing behaviour of metal-composite sandwich structures, J. Compos Struct. 75 (2006) 305-312. 10.1016/j.compstruct.2006.04.010
H.I. Demirci, C. Esner, M. Yasar. Effect of the blank holder force on drawing of aluminum alloy square cup: theoretical and experimental investigation, J. J Mater Process Technol. 206 (2008) 152-160. 10.1016/j.jmatprotec.2007.12.010
S.H. Kim, H. Huh. Tool design in a multi-stage drawing and ironing process of a rectangular cup with a large aspect ratio using finite element analysis, J. Int J Mach Tools Manuf. 42 (2002) 863-875. 10.1016/s0890-6955(02)00003-2
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.