다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Metals, v.8 no.10, 2018년, pp.791 -
Čiripová, Lucia (Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, 04001 Koš) , Falat, Ladislav (ice, Slovakia) , Ševc, Peter (Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, 04001 Koš) , Vojtko, Marek (ice, Slovakia) , Džupon, Miroslav (Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, 04001 Koš)
AI-Helper
The present work is focused on the investigation of isothermal ageing effects on room-temperature tensile properties and the failure of quenched and tempered martensitic/austenitic weldments between T92 and TP316H heat-resistant steels. The dissimilar weldments were produced by gas tungsten arc weld...
Parker The high-temperature performance of nickel-based transition joints II. Fracture behaviour Mater. Sci. Eng. A 2001 10.1016/S0921-5093(00)01375-7 299 174
Anand Effectiveness of Ni-based diffusion barriers in preventing hard zone formation in ferritic steel joints J. Mater. Sci. 2009 10.1007/s10853-008-3052-9 44 257
Kim High-temperature tensile and creep deformation of cross-weld specimens of weld joint between T92 martensitic and Super304H austenitic steels Mater. Charact. 2014 10.1016/j.matchar.2014.09.011 97 161
Mittal Microstructures and mechanical properties of dissimilar T91/347H steel weldments J. Mater. Process. Technol. 2015 10.1016/j.jmatprotec.2015.01.008 220 76
Silwal Effect of postweld heat treatment on the toughness of heat-affected zone for Grade 91 steel Weld. J. 2013 92 80
Creep properties in similar weld joint of a thick-walled P92 steel pipe Mater. Charact. 2016 10.1016/j.matchar.2016.06.033 119 1
Pandey Dissimilar joining of CSEF steels using autogenous tungsten-inert gas welding and gas tungsten arc welding and their effect on δ-ferrite evolution and mechanical properties J. Manuf. Process. 2018 10.1016/j.jmapro.2017.11.020 31 247
Zhang Microstructure evolution of P92 steel weld metal after service for 8000 h Kovove Mater. 2017 10.4149/km_2017_2_115 55 115
Wu Microstructure characteristics and temperature-dependent high cycle fatigue behavior of advanced 9% Cr/CrMoV dissimilarly welded joint Mater. Sci. Eng. A 2014 10.1016/j.msea.2014.07.067 615 98
Cao Microstructure and mechanical properties of dissimilar materials joints between T92 martensitic and S304H austenitic steels Mater. Des. 2011 10.1016/j.matdes.2011.01.008 32 2763
Chen High-temperature short-term tensile test and creep rupture strength prediction of the T92/TP347H dissimilar steel weld joints Eng. Fail. Anal. 2012 10.1016/j.engfailanal.2012.05.024 26 220
Wang Failure analysis of dissimilar steel welded joints in a 3033t/h USC boiler Procedia Mater. Sci. 2014 10.1016/j.mspro.2014.06.275 3 1706
Rathod Experimental analysis of dissimilar metal weld joint: Ferritic to austenitic stainless steel Mater. Sci. Eng. A 2015 10.1016/j.msea.2015.05.011 639 259
Wang Fracture mechanism of a dissimilar metal welded joint in nuclear power plant Eng. Fail. Anal. 2013 10.1016/j.engfailanal.2012.10.005 28 134
Li Structural, mechanical and corrosion studies of Cr-rich inclusions in 152 cladding of dissimilar metal weld joint J. Nucl. Mater. 2018 10.1016/j.jnucmat.2017.10.012 498 9
Cao Microstructural analysis on creep properties of dissimilar materials joints between T92 martensitic and HR3C austenitic steels Mater. Sci. Eng. A 2011 10.1016/j.msea.2011.04.057 528 6103
Falat The influence of PWHT regime on microstructure and creep rupture behaviour of dissimilar T92/TP316H ferritic/austenitic welded joints with Ni-based filler metal Kovove Mater. 2011 10.4149/km_2011_6_417 49 417
Falat Correlation between microstructure and creep performance of martensitic/austenitic transition weldment in dependence of its post-weld heat treatment Eng. Fail. Anal. 2014 10.1016/j.engfailanal.2014.02.018 40 141
Falat The effects of postweld heat treatment and isothermal aging on T92 steel heat-affected zone mechanical properties of T92/TP316H dissimilar weldments J. Mater. Res. 2016 10.1557/jmr.2016.134 31 1532
Nhung The relationship between continuous cooling rate and microstructure in the heat affected zone (HAZ) of the dissimilar weld between carbon steel and austenitic stainless steel Acta Metall. Slovaca 2017 10.12776/ams.v23i4.1002 23 363
10.20944/preprints201805.0412.v1 Lee, S.-H., Na, H-S., Lee, K-W., Lee, J-Y., and Kang, C.Y (2018). Effect of austenite-to-ferrite phase transformation at grain boundaries on PWHT cracking susceptibility in CGHAZ of T23 steel. Metals, 8.
10.3390/ma11050787 Kral, P., Dvorak, J., Sklenicka, V., Masuda, T., Horita, Z., Kucharova, K., Kvapilova, M., and Svobodova, M. (2018). The effect of ultrafine-grained microstructure on creep behaviour of 9% Cr steel. Materials, 11.
Zhao Experimental study on creep damage evolution process of Type IV cracking in 9Cr-0.5Mo-1.8W-VNb steel welded joint Eng. Fail. Anal. 2012 10.1016/j.engfailanal.2011.09.003 19 22
Barbadikar Effect of normalizing and tempering temperatures on microstructure and mechanical properties of P92 steel Int. J. Press. Vessels Pip. 2015 10.1016/j.ijpvp.2015.07.001 132-133 97
Blach Fracture characteristics of thermally exposed 9Cr-1Mo steel after tensile and impact testing at room temperature Eng. Fail. Anal. 2009 10.1016/j.engfailanal.2008.09.003 16 1397
Blach The influence of thermal exposure and hydrogen charging on the notch tensile properties and fracture behaviour of dissimilar T91/TP316H weldments High Temp. Mater. Process. 2014 10.1515/htmp-2013-0053 33 329
Falat The influence of isothermal ageing and subsequent hydrogen charging at room temperature on local mechanical properties and fracture characteristics of martensitic-bainitic weldments for power engineering J. Min. Metall. Sect. B-Metall. 2017 10.2298/JMMB170515033F 53 373
Cottrell Theory of dislocations Prog. Met. Phys. 1953 10.1016/0502-8205(53)90018-5 4 205
Cahn, R.W., and Haasen, P. (1996). Dislocations. Physical Metallurgy, Elsevier Science. [4th ed.].
Shin Transition of creep damage region in dissimilar welds between Inconel 740H Ni-based superalloy and P92 ferritic/martensitic steel Mater. Charact. 2018 10.1016/j.matchar.2018.02.039 139 144
Pavan Development and evaluation of SUS304H-IN 617 welds for advanced ultrasupercritical boiler applications Mater. Sci. Eng. A 2015 10.1016/j.msea.2015.06.065 642 32
Choi Fusion boundary precipitation in thermally aged dissimilar metal welds studied by atom probe tomography and nanoindentation J. Nucl. Mater. 2016 10.1016/j.jnucmat.2015.12.047 471 8
Dong Microstructure and intergranular stress corrosion crackingsusceptibility of a SA508-52M-316L dissimilar metal weld joint in primary water J. Mater. Sci. Technol. 2018 10.1016/j.jmst.2017.11.051 34 1281
Yoo Effects of thermal aging on the microstructure of Type-II boundaries in dissimilar metal weld joints J. Nucl. Mater. 2015 10.1016/j.jnucmat.2015.01.009 459 5
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.