참고문헌 (20)

1. J. E. Soo 2016 2D numerical analysis methodology for the penetration determination of the combat ground vehicle J. E. Soo, 2D numerical analysis methodology for the penetration determination of the combat ground vehicle, Mechanical Engineering of Myongji University (2016). 

2. Journal of Mechanical Science and Technology J. J. Hyun 37 9 1083 2013 J. J. Hyun, L. Y. Shin, K. J. Hoon and B. Y. Woon, Study on penetration characteristics of tungsten cylindrical penetrator, Journal of Mechanical Science and Technology, 37 (9) (2013) 1083-1091. 

3. International Journal of Impact Engineering C. E. Anderson Jr. 80 24 2015 10.1016/j.ijimpeng.2014.12.009 C. E. Anderson Jr. and J. (Jack) P. Riegel, A penetration model for metallic targets based on experimental data, International Journal of Impact Engineering, 80 (2015) 24-35. 

   상세보기

4. A. Karpenko 1413 2007 Experimental simulation of fragmentation effects of an improvised explosive device A. Karpenko and M. Ceh, Experimental simulation of fragmentation effects of an improvised explosive device, Proc. of 23rd International Symposium on Ballistics Tarragona, Spain (2007) 1413-1420. 

5. W. Walters 2005 Alekseevski-Tate Penetration Equation 10.21236/ADA443657 W. Walters and C. Williams, A solution of the Alekseevski-Tate Penetration Equation, Army Research Laboratory (2005). 

   

6. T. Deniz 2010 Ballistic penetration of hardened steel plates, Mechanical Engineering of Middle East Technical University T. Deniz, Ballistic penetration of hardened steel plates, Mechanical Engineering of Middle East Technical University (2010). 

7. Journal of Computational Design and Engineering P. Cavaliere 3 1 71 2016 10.1016/j.jcde.2015.08.002 P. Cavaliere, A. Perrone and A. Silvello, Steel nitriding optimization through multi-objective and FEM analysis, Journal of Computational Design and Engineering, 3 (1) (2016) 71-90. 

   원문보기 상세보기

8. Engineering Mechanics P. Pěchouček 18 5/6 353 2011 P. Pěchouček, S. Rolc and J. Buchar, Fragment simulating projectile penetration into layered targets, Engineering Mechanics, 18 (5/6) (2011) 353-361. 

9. Bulletin of The Polish Academy of Sciences Technical Sciences P. Chabera 63 2 363 2015 10.1515/bpasts-2015-0040 P. Chabera, A. Boczkowska and A. Morka, Comparison of numerical and experimental study of armour system based on alumina and silicon carbide ceramics, Bulletin of The Polish Academy of Sciences Technical Sciences, 63 (2) (2015) 363-367. 

   상세보기

10. Spain C. G. Fountzoulas 2 873 2007 C. G. Fountzoulas, B. A. Cheeseman, P. G. Dehmer and J. M. Sands, A computational study of laminate transparent armor impacted by FSP, Proc. of 23rd International Symposium on Ballistics Tarragona, Spain, 2 (2007) 873-881. 

11. Journal of Mechanical Science and Technology L. S. Won 2013 12 3697 2013 L. S. Won, L. Y. Shin and K. J. Hoon, An impact characteristics of tungsten penetrator with composite target, Journal of Mechanical Science and Technology, 2013 (12) (2013) 3697-3700. 

12. Multidiscipline Modeling in Materials and Structures M. Grujicic 3 3 287 2007 10.1163/157361107781389562 M. Grujicic, B. Pandurangan, U. Zecevic, K. L. Koudela and B. A. Cheeseman, Ballistic performance of alumina/S-2 glass reinforced polymer-matrix composite hybrid lightweight armor against armor piercing (AP) and non-AP projectiles, Multidiscipline Modeling in Materials and Structures, 3 (3) (2007) 287-312. 

    상세보기

13. International Journal of Impact Engineering M. A. G. Silva 31 3 289 2005 10.1016/j.ijimpeng.2004.01.011 M. A. G. Silva, C. Cismasiu and C. G. Chiorean, Numerical simulation of ballistic impact on composite laminates, International Journal of Impact Engineering, 31 (3) (2005) 289-306. 

    상세보기

14. G. Öztürk 2010 Numerical and experimental investigation of perforation of ST-37 steel plates by oblique impact, Mechanical Engineering of Middle East Technical University G. Öztürk, Numerical and experimental investigation of perforation of ST-37 steel plates by oblique impact, Mechanical Engineering of Middle East Technical University (2010). 

15. W. Goldsmith 1985 Normal and oblique impact of cylindro-conical projectiles on metallic plates 10.21236/ADA328643 W. Goldsmith and S. A. Finnegan, Normal and oblique impact of cylindro-conical projectiles on metallic plates, Naval Weapons Center, China Lake, CA 93555-6001 (1985). 

    

16. S. Ramon 1998 Autodyn theory manual S. Ramon, Autodyn theory manual, Century Dynamics Inc., California, USA (1998). 

17. Engineering Fracture Mechanics G. R. Johnson 21 1 31 1985 10.1016/0013-7944(85)90052-9 G. R. Johnson and W. H. Cook, Fracture characteristics of three metals subjected to various strains, strain rates and temperatures, Engineering Fracture Mechanics, 21 (1) (1985) 31-48. 

    상세보기

18. J. A. Zukas 1990 High velocity impact dynamics J. A. Zukas, High velocity impact dynamics, John Wiley and Sons Ltd, New York, USA (1990). 

19. Journal of Computational Design and Engineering I. Otomo 1 2 96 2014 10.7315/JCDE.2014.010 I. Otomo, M. Onosato and F. Tanaka, Direct construction of a four-dimensional mesh model, Journal of Computational Design and Engineering, 1 (2) (2014) 96-102. 

    원문보기 상세보기

20. Korean Journal of Computational Design and Engineering S. Jugyeong 22 3 295 2017 10.7315/CDE.2017.295 S. Jugyeong, P. Kang and K. Gun-in, Numerical analysis of penetration characteristics of 5.45 mm and 7.62 mm AP bullet on Al7075-T651 plate, Korean Journal of Computational Design and Engineering, 22 (3) (2017) 295-305. 

    상세보기