최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of mechanical science and technology, v.32 no.12, 2018년, pp.5755 - 5765
Cho, A. Hyoun , Park, Kang , Kim, Gun In
초록이 없습니다.
Korean Journal of Computational Design and Engineering M. H. Nam 22 2 141 2017 10.7315/CDE.2017.141 M. H. Nam and K. Park, The vulnerability assessment of hydro-pneumatic suspension of ground combat vehicles using vulnerable area method and DMEA, Korean Journal of Computational Design and Engineering, 22 (2) (2017) 141-149.
Korean Journal of Computational Design and Engineering J. G. Shin 22 3 295 2017 10.7315/CDE.2017.295 J. G. Shin and K. Park, Numerical Analysis of Penetration Characteristics of 5.45mm and 7.62mm AP Bullet on Al 7075-T651 plate, Korean Journal of Computational Design and Engineering, 22 (3) (2017) 295-305.
National Defense and Technique G.C. Jine 166 48 1992 G.-C. Jine and C. Choe, The vulnerability analysis of the combat vehicle and reduction techniques, National Defense and Technique, 166 (1992) 48-55.
H.G. Hwang 2015 The Korea Institute of Information and Communication Engineering, 19 H.-G. Hwang, J.-W. Lee, J.-S. Lee and J.-S. Park, A development of 3D penetration analysis program for survivability analysis of combat system: Focused on tank model, The Korea Institute of Information and Communication Engineering, 19 (2015).
Korean Journal of Computational Design and Engineering C. Yoo 20 3 238 2015 10.7315/CADCAM.2015.238 C. Yoo and E.-S. Jang, The target modeling and the shot line analysis system to assess vulnerability of the ground combat vehicle, Korean Journal of Computational Design and Engineering, 20 (3) (2015) 238-245.
S. Ramon 1998 Autodyn theory manual S. Ramon, Autodyn theory manual, Century Dynamics Inc., California, USA (1998).
Composite Structures Z. Fawaz 63 3-4 387 2004 10.1016/S0263-8223(03)00187-9 Z. Fawaz and W. Wheng, Numerical simulation of normal and oblique ballistic impact on ceramic composite armours, Composite Structures, 63 (3-4) (2004) 387-395.
D. D. Lynch 1997 Army Research Laboratory D. D. Lynch, R. W. Kunkel and ·S. S. Juarascio, An analysis comparison using the vulnerability analysis for surface targets (VAST) computer code and the computation of vulnerable area and repair time (COVART III) computer code, Army Research Laboratory (1997).
J. A. Zook 1992 Terminal ballistics test and analysis guidelines for the penetration mechanics branch, Ballistic Research Laboratory J. A. Zook, K. Frank and G. F. Silsby, Terminal ballistics test and analysis guidelines for the penetration mechanics branch, Ballistic Research Laboratory (1992).
T. Deniz 2010 Ballistic penetration of hardened steel plate, A Thesis (submitted) T. Deniz, Ballistic penetration of hardened steel plate, A Thesis (submitted), Graduate School of Natural and Applied Sciences of Middle East Technical University (2010).
W. Kang 741 2014 The interpretation of Explosive bolt using analysis code W. Kang, D. Kim and G. Bang, The interpretation of Explosive bolt using analysis code, The Korean Society of Propulsion Engineering (2014) 741-744.
Journal of Mechanical Science and Technology M. Gwak 34 11 957 2010 M. Gwak and K. W. Kwon, Modeling of damage caused to injectors used in pulverized-coal-oxygen-combustion furnace, Journal of Mechanical Science and Technology, 34 (11) (2010) 957-964.
Journal of Mechanical Science and Technology J. H. Song 30 6 670 2006 J. H. Song and H. Huh, Dynamic material property of the sinter-Forged Cu-Cr alloys with the variation of chrome content, Journal of Mechanical Science and Technology, 30 (6) (2006) 670-677.
FEA modeling of orthogonal cutting of steel: A review F. C. Jula 3 2 98 2012 F. C. Jula and T. F. U Gent, FEA modeling of orthogonal cutting of steel: A review, Sustainable Construction and Design, 3 (2) (2012) 98-105.
Finite Elements in Analysis and Design Y. Ayed 92 72 2014 10.1016/j.finel.2014.08.006 Y. Ayed and G. Germain, Experimental and numerical study of laser-assisted machining of Ti6Al4V titanium alloy, Finite Elements in Analysis and Design, 92 (2014) 72-79.
Materials Science & Engineering: A A. Banerjee 640 200 2015 10.1016/j.msea.2015.05.073 A. Banerjee and S. Dhar, Determination of Johnson cook material and failure model constants and numerical modelling of Charpy impact test of armour steel, Materials Science & Engineering: A, 640 (2015) 200-209.
G. Ö R. K 2010 Numerical and experimental investigation of perforation of ST-37 steel plates by oblique impact, A Thesis (submitted) Gökhan Öztü R. K., Numerical and experimental investigation of perforation of ST-37 steel plates by oblique impact, A Thesis (submitted), Graduate School of Natural and Applied Sciences of Middle East Technical University (2010).
N. S. Brar 1195 2010 Constitutive model constants for Al7075-T651 and Al7075-T6, Proc. of AIP Conference N. S. Brar and V. S. Joshi, Constitutive model constants for Al7075-T651 and Al7075-T6, Proc. of AIP Conference (2010) 1195 (1).
Materials and Design N. Kılıc 44 35 2013 10.1016/j.matdes.2012.07.045 N. Kılıc and B. Ekici, Ballistic resistance of high hardness armor steels against 7.62mm armor piercing ammunition, Materials and Design, 44 (2013) 35-48.
Korean Journal of Computational Design and Engineering A. H. Cho 22 2 101 2017 10.7315/CDE.2017.101 A. H. Cho, K. Park and G. I. Kim, Numerical analysis approach to calculate the damage degree of the combat vehicle, Korean Journal of Computational Design and Engineering, 22 (2) (2017) 101-109.
Composites Part B: Engineering K. Krishnan 41 8 583 2010 10.1016/j.compositesb.2010.10.001 K. Krishnan and S. Sockalingam, Numerical simulation of ceramic composite armor subjected to ballistic impact, Composites Part B: Engineering, 41 (8) (2010) 583-593.
Journal of Computational Design and Engineering H.C. Lu 4 4 330 2017 10.1016/j.jcde.2017.05.001 H.-C. Lu and W. R. Guadros, Evaluation of user-guided semi-automatic decomposition tool for hexahedral mesh generation, Journal of Computational Design and Engineering, 4 (4) (2017) 330-338.
Journal of Computational Design and Engineering A. N. Chaudhury 4 3 178 2017 10.1016/j.jcde.2017.02.001 A. N. Chaudhury and D. Datta, Analysis of prismatic springs of non-circular coil shape and non-prismatic springs of circular coil shape by analytical and finite element methods, Journal of Computational Design and Engineering, 4 (3) (2017) 178-191.
Experimental Mechanics M. J. Forrestal 50 8 1245 2010 10.1007/s11340-009-9328-4 M. J. Forrestal and T. Børvik, Perforation of 7075-T651 Aluminum Armor Plate with 7.62mm APM2 Bullets, Experimental Mechanics, 50 (8) (2010) 1245-1251.
W. Gooch 2005 Ballistic analysis of bulgarian electroslag remelted dual hard steel armor plate W. Gooch and M. Burkins, Ballistic analysis of bulgarian electroslag remelted dual hard steel armor plate, Proc. of 22nd International Symposium on Ballistics, Vancouver (2005).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.