다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
IEEE transactions on components, packaging, and manufacturing technology, v.9 no.1, 2019년, pp.28 - 38
Wu, Bulong (Mechanical Engineering Department, University of Maryland at College Park, College Park, MD, USA) , Kim, Dae-Suk (Mechanical Engineering Department, University of Maryland at College Park, College Park, MD, USA) , Han, Bongtae (Mechanical Engineering Department, University of Maryland at College Park, College Park, MD, USA) , Palczynska, Alicja (Robert Bosch GmbH, Reutlingen, Germany) , Prisacaru, Alexandru (Robert Bosch GmbH, Reutlingen, Germany) , Gromala, Przemyslaw Jakub (Robert Bosch GmbH, Reutlingen, Germany)
AI-Helper
A model/sensor hybrid approach is implemented to conduct failure prognostics of an automotive electronic control unit (ECU). A 3-D finite-element model simulating a complex ECU is built, and its predictability is calibrated and verified by an optical displacement measurement technique called moir&#x...
IEEE Trans Compon Packag Manuf Technol A Determination of an effective coefficient of thermal expansion of electronic packaging components: A whole-field approach han 1996 10.1109/95.506110 19 240
10.1177/001448519803800405
Cho, S., Cho, S., Han, B.. OBSERVING REAL-TIME THERMAL DEFORMATIONS IN ELECTRONIC PACKAGING. Experimental techniques, vol.26, no.3, 25-29.
Han, Bongtae. THERMAL STRESSES IN MICROELECTRONICS SUBASSEMBLIES: QUANTITATIVE CHARACTERIZATION USING PHOTOMECHANICS METHODS. Journal of thermal stresses, vol.26, no.6, 583-613.
Cho, Seungmin, Han, Bongtae, Joo, Jinwon. Temperature Dependent Deformation Analysis of Ceramic Ball Grid Array Package Assembly Under Accelerated Thermal Cycling Condition. Journal of electronic packaging, vol.126, no.1, 41-47.
Ifju, P.G., Han, B.. Recent Applications of Moiré Interferometry. Experimental mechanics, vol.50, no.8, 1129-1147.
Dorey, Anthony P.. A high sensitivity semiconductor strain sensitive circuit. Solid-state electronics, vol.18, no.4, 295-299.
Palczynska, A., Gromala, P.J., Mayer, D., Han, B., Melz, T.. In-situ investigation of EMC relaxation behavior using piezoresistive stress sensor. Microelectronics reliability, vol.62, 58-62.
Palczynska, Alicja, Prisacaru, Alexandru, Gromala, Przemyslaw Jakub, Han, Bongtae, Mayer, Dirk, Melz, Tobias. Towards prognostics and health monitoring: The potential of fault detection by piezoresistive silicon stress sensor. Microelectronics reliability, vol.74, 165-172.
10.1109/ICEPT.2015.7236616
Yonggang Chen, Jaeger, R. C., Suhling, J. C.. CMOS Sensor Arrays for High Resolution Die Stress Mapping in Packaged Integrated Circuits. IEEE sensors journal, vol.13, no.6, 2066-2076.
Proc 16th Int Conf Therm Mech Multi-Phys Simulation Experim Microelectron Microsyst (EuroSimE) Thermal deformation analysis of automotive electronic control units subjected to passive and active thermal conditions wu 2015 1
Lall, P., Islam, M.N., Rahim, M.K., Suhling, J.C.. Prognostics and Health Management of Electronic Packaging. IEEE transactions on components and packaging technologies : a publication of the IEEE Components, Packaging, and Manufacturing Technology Society, vol.29, no.3, 666-677.
Doelle, M., Peters, C., Ruther, P., Paul, O.. Piezo-FET stress-sensor arrays for wire-bonding characterization. Journal of microelectromechanical systems : a joint IEEE and ASME publication on microstructures, microactuators, microsensors, and microsystems, vol.15, no.1, 120-130.
Guo, Y., Lim, C. K., Chen, W. T., Woychik, C. G.. Solder Ball Connect (SBC) assemblies under thermal loading: I. Deformation measurement via moiré interferometry, and its interpretation. IBM journal of research and development, vol.37, no.5, 635-648.
Texas Instrum Tech J DMDTM package model calibration using interferometry han 2001 1
Proc 15th Int Conf Therm Mech Multi-Phys Simulation Experim Microelectron Microsyst (EuroSimE) Electronic control package model calibration using moiré interferometry kim 2014 1
High Sensitivity Moir Experimental Analysis for Mechanics and Materials post 2012
10.1109/EuroSimE.2013.6529894
Proc 7th Int Conf Integr Power Electron Syst (CIPS) Reliability of power electronics under thermal loading mccluskey 2012 1
Onuki, J., Koizumi, M., Suwa, M.. Reliability of thick Al wire bonds in IGBT modules for traction motor drives. IEEE transactions on advanced packaging : a publication of the IEEE Components, Packaging, and Manufacturing Technology Society and the Lasers and Electro Optics Society, vol.23, no.1, 108-112.
Li Yang, Agyakwa, P. A., Johnson, C. M.. Physics-of-Failure Lifetime Prediction Models for Wire Bond Interconnects in Power Electronic Modules. IEEE transactions on device and materials reliability : a publication of the IEEE Electron Devices Society and the IEEE Reliability Society, vol.13, no.1, 9-17.
10.1115/IMECE2003-42007
Hu, Jun Ming, Pecht, Michael, Dasgupta, Abhijit. A Probabilistic Approach for Predicting Thermal Fatigue Life of Wire Bonding in Microelectronics. Journal of electronic packaging, vol.113, no.3, 275-285.
10.1109/ISPSD.2008.4538928
10.1109/ESIME.2006.1644022
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.