최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Applied thermal engineering, v.164, 2020년, pp.114465 -
Shi, Hongyan , Wu, Jianhua
Abstract Thermal analysis of the oil sump and compression unit in a hermetic rotary compressor is important for enhancing its performance and reliability. In this study, the temperature distribution, heat-transfer mechanism, and heat balance of the oil sump and compression unit in a rotary compress...
Int. J. Refrig. Padhy 17 400 1994 10.1016/0140-7007(94)90075-2 Heat transfer analysis of a rolling-piston rotary compressor
Liu 1993 Simulation of a Variable Speed Compressor with Special Attention to Supercharging Effects
Ishiil 1423 2000 International Compressor Engineering Conference Calculations for compression efficiency caused by heat transfer in compact rotary compressors
Liu 441 1984 Proceedings of International Compressor Engineering Conference Heat transfer between gas and cylinder wall of refrigerating reciprocating compressor
Int. J. Refrig Chen 25 751 2002 10.1016/S0140-7007(01)00072-X Mathematical modeling of scroll compressors-part II: overall scroll compressor modeling
Appl. Therm. Eng. Ooi 23 1931 2003 10.1016/S1359-4311(03)00150-9 Heat transfer study of a hermetic refrigeration compressor
Kara 1993 2010 Proceedings of International Compressor Engineering Conference Thermal analysis of a small hermetic reciprocating compressor
Goossens 2406 2016 Proceedings of International Compressor Engineering Conference Integral and Differential Model of Hermetical Compressor Heat Losses Including Experimental Validation
Posch 2429 2016 Proceedings of International Compressor Engineering Conference Thermal Analysis of a Hermetic Reciprocating Compressor Using Numerical
Almbauer 1794 2006 Proceedings of International Compressor Engineering Conference 3-Dimensional simulation for obtaining the heat transfer correlations of a thermal network calculation for a hermetic reciprocating compressor
Int. J. Refrig. Raja 26 652 2003 10.1016/S0140-7007(03)00041-0 A numerical model for thermal mapping in a hermetically sealed reciprocating refrigerant compressor
Sanvezzo 2210 2012 Proceedings of International Compressor Engineering Conference A heat transfer model combining differential and integral formulations for thermal analysis of reciprocating compressors
Nakano 1326 2008 International Compressor Engineering Conference at Purdue CFD Applications for Development of Reciprocating Compressor
Kara 1307 2010 International Compressor Engineering Conference at Purdue Thermal Analysis of a Small Hermetic Reciprocating Compressor
Colmek 1186 2014 The improvement of the Compressor Efficiency by Reduceing Heat Transfer
Int. J. Therm. Sci. Hsieh 50 7 1271 2011 10.1016/j.ijthermalsci.2011.02.006 Calculation of temperature distributions in the rotors of oil-injected screw compressors
Int. J. Heat Mass Transf. Shen 55 7278 2012 10.1016/j.ijheatmasstransfer.2012.07.057 3-D finite element simulation of the cylinder temperature distribution in boil-off gas (BOG) compressors
Int. J. Therm. Sci. Ooi 43 677 2004 10.1016/j.ijthermalsci.2003.11.005 Convective heat transfer in a scroll compressor chamber: a 2-D simulation
Pereira 1314 2016 International Compressor Engineering Conference at Purdue A Heat Transfer Correlation for the Suction and Compression Chambers of Scroll Compressors
Appl. Therm. Eng. Wu 61 425 2013 10.1016/j.applthermaleng.2013.07.047 Numerical study on oil supply system of a rotary compressor
Appl. Therm. Eng. Wu 95 365 2016 10.1016/j.applthermaleng.2015.11.036 Numerical analysis of temperature distribution of motor-refrigerant in a R32 rotary compressor
Adair 86 1972 Proceedings of the International Compressor Engineering Conference Instantaneous heat transfer to the cylinder wall in reciprocating compressors
J. Basic Eng. Atesmen 93 461 1971 10.1115/1.3425280 The dispersion of matter in turbulent pipe flows
Recktenwald 1989 A Study of Heat Transfer Between the Walls and Gas Inside the Cylinder of a Reciprocating Compressor
J. Refrig. Shi 13 2017 Physical property models of R32 and POE and PVE oil
Hayano 620 1988 Proceedings of International Compressor Engineering Conference An analysis of losses in scroll compressor
Shi 2016 Numerical Simulation and Experimental Research for the Cooling of Compressor Motor and the Heating of Suction Gas on R410A Low back-pressure Roling Piston Compressor Applied to High Temperature Environment
Yang 2006 Heat Transfer (4th)
Study on performance and dynamics of inverter controlled rotary compressors Wu 2000
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.