Abstract ▼ AI-Helper

The optical structure of edge-lit LED backlight has been optimized via simulation study in order to remove bright spots appearing on the entrance region of the light guide plate (LGP) and thus to improve the luminance uniformity. The density of scattering dots located on the back surface of LGP was ...

The optical structure of edge-lit LED backlight has been optimized via simulation study in order to remove bright spots appearing on the entrance region of the light guide plate (LGP) and thus to improve the luminance uniformity. The density of scattering dots located on the back surface of LGP was adjusted according to the location of LED's. In addition, lenticular lenses or a diffuse transmissive surface were formed on the side surface of LGP facing the LED's, and the density of lenticular lenses was optimized for redistributing rays emitted from LED's into wider angles. The bright spots which could be seen from conventional LED backlight were removed by the combination of these two optical structures. The application of diffuse surface to the entrance face gave better uniformity than the application of lenticular lenses. However, dark regions still appear on the entrance region of LGP, which should be removed by more appropriate optical design for achieving better luminance uniformity on the LED backlight.