선택한 단어 수는 입니다.
최소 단어 이상 선택하여야 합니다.
최소 단어 이상 선택하여야 합니다.
선택한 단어 수는 30입니다.
최대 10 단어까지만 선택 가능합니다.
최대 10 단어까지만 선택 가능합니다.
제안 방법
- In this study, tensile and shear properties with small deformation and various seam characteristics with finishing, seaming and sealing processes were investigated.
- The specimens used in this study were prepared by coating and laminating processes, and classified according to the coagulation method, shape of knife, and the number of laminating layer. The pre-finished fabrics of coating and laminating methods were also used to compare with finished ones in this study.
- The specimens used in this study were prepared by coating and laminating processes, and classified according to the coagulation method, shape of knife, and the number of laminating layer. The pre-finished fabrics of coating and laminating methods were also used to compare with finished ones in this study.
이론/모형
- Measurement of seam performances was carried out on a constant-rate-of extension (CRE) type of machine capable of jaw separation rate of 305± lOmm/min in accordance with ASTM D 1683. During application of the force to the sewn seam specimen, the seam rupture was observed and recorded whether it was caused by (1) fabric yam rupture, (2) sewing thread rupture, and (3) sewn seam yam slippage.
- Tensile properties and shear properties with small deformation were measured with breathable waterproof finishing, seaming, and sealing by using Kawabata evaluation system (KES-FB). From this system, the various mechanical parameters can be calculated.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.