많은 무선통신 응용 시스템에서 다양한 종류의 마이크로스트립 안테나들이 사용되고 있다. 본 논문에서는 이중급전된 광대역적층형마이크로스트립 패치 안테나의 설계 방법을 연구하였다. 임피던스대역폭을 개선하기 위하여 주 방사패치 및 기생패치의 크기, 패치 간 거리, 인셋 급전의 길이 등을 조정하였다. 시뮬레이션을 통해 2.3-2.7 GHz 대역의 안테나를 설계하고 반사손실, 이득, 방사패턴 등의 안테나 특성을 확인하였다.
많은 무선통신 응용 시스템에서 다양한 종류의 마이크로스트립 안테나들이 사용되고 있다. 본 논문에서는 이중급전된 광대역 적층형 마이크로스트립 패치 안테나의 설계 방법을 연구하였다. 임피던스 대역폭을 개선하기 위하여 주 방사패치 및 기생패치의 크기, 패치 간 거리, 인셋 급전의 길이 등을 조정하였다. 시뮬레이션을 통해 2.3-2.7 GHz 대역의 안테나를 설계하고 반사손실, 이득, 방사패턴 등의 안테나 특성을 확인하였다.
Various types of microstrip antennas can be used for many applications in wireless communication systems. In this paper, we studied a design method for a broadband dual-fed stacked microstrip patch antenna. The impedance bandwidth is improved by adjusting the sizes of main radiating patch and parasi...
Various types of microstrip antennas can be used for many applications in wireless communication systems. In this paper, we studied a design method for a broadband dual-fed stacked microstrip patch antenna. The impedance bandwidth is improved by adjusting the sizes of main radiating patch and parasitic patch, the distance between the patches, the length of inset feed line, etc. The antenna is designed by simulation for an operation in the frequency range of 2.3-2.7 GHz, and the antenna characteristics such as return loss, gain, radiation patterns are examined.
Various types of microstrip antennas can be used for many applications in wireless communication systems. In this paper, we studied a design method for a broadband dual-fed stacked microstrip patch antenna. The impedance bandwidth is improved by adjusting the sizes of main radiating patch and parasitic patch, the distance between the patches, the length of inset feed line, etc. The antenna is designed by simulation for an operation in the frequency range of 2.3-2.7 GHz, and the antenna characteristics such as return loss, gain, radiation patterns are examined.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
문제 정의
본 논문에서는 이중급전방식의 광대역 적층형 마이크로스트립 패치 안테나 설계에 대해 연구하였다. 급전선에 연결된 주 패치 안테나는 인셑급전 방식에 의해 임피던스 정합을 얻고 별도의 정합회로를 부가하지 않으며, 주 패치 위에 기생패치를 적층하여 광대역 특성과 이득 및 효율을 개선시킨 안테나이다.
제안 방법
5 GHz)에서 공진되도록 패치의 폭과 길이를 결정하였다. 공진 주파수에 부합하는 180도 위상차를 갖는 전력 분배기를 설계하고, 정합을 위해 인셑급전의 길이를 조절하였다. 이득과 대역폭을 개선하기 위해 주 패치로부터 8 mm 정도의 위치에 기생패치를 부가하였다.
안테나의 특성을 상용 전자기문제 해석툴인 CST社의 Microwave Studio를 이용하여 시뮬레이션하였으며, 많은 시뮬레이션을 통해 2.3-2.7GHz 대역에 적합한 파라미터 값들을 얻을 수 있었다. 목표 주파수 대역에 부합하도록 설계된 안테나의 주파수 대역은 2.
공진 주파수에 부합하는 180도 위상차를 갖는 전력 분배기를 설계하고, 정합을 위해 인셑급전의 길이를 조절하였다. 이득과 대역폭을 개선하기 위해 주 패치로부터 8 mm 정도의 위치에 기생패치를 부가하였다. 기판은 크기가 80 mm×80 mm이고 주패치는 1.
대상 데이터
기판은 크기가 80 mm×80 mm이고 주패치는 1.6 mm, 기생패치는 0.8 mm의 두께의 FR4 기판(비유전율 = 4.4, 손실탄젠트 = 0.025)에 설계하였다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.