An electrically operated propellant is configured to ignite and extinguish over a range of pressures. In examples, the electrically operated propellant is included in a gas generation system having a combustion chamber and at least two electrodes coupled with the propellant. The electrically operate
An electrically operated propellant is configured to ignite and extinguish over a range of pressures. In examples, the electrically operated propellant is included in a gas generation system having a combustion chamber and at least two electrodes coupled with the propellant. The electrically operated propellant is configured to ignite at an ignition condition and extinguish under an extinguishing condition. In the ignition condition an electrical input is applied across the electrodes to ignite the electrically operated propellant. In the extinguishing condition the electrical input is interrupted while the pressure within the combustion chamber is greater than 200 psi, and the ignited electrically operated propellant extinguishes.
대표청구항▼
1. A gas generation system with an electrically operated propellant comprising: a combustion chamber;at least two electrodes configured for coupling with an electrical power source;an electrically operated propellant within the combustion chamber, the electrically operated propellant is configured t
1. A gas generation system with an electrically operated propellant comprising: a combustion chamber;at least two electrodes configured for coupling with an electrical power source;an electrically operated propellant within the combustion chamber, the electrically operated propellant is configured to extinguish at pressures greater than 200 psi, the at least two electrodes are coupled with the electrically operated propellant; andwherein the electrically operated propellant is configured to ignite at an ignition condition and extinguish under an extinguishing condition, in the ignition condition an electrical input is applied across the electrodes to ignite the electrically operated propellant, andin the extinguishing condition the electrical input is interrupted, the pressure within the combustion chamber is greater than 200 psi, and the electrically operated propellant transitions from ignited to extinguished. 2. The gas generation system of claim 1, wherein the electrically operated propellant is configured to extinguish at pressures of between 200 and 2000 psi, and in the extinguishing condition the pressure within the combustion chamber is between 200 and 2000 psi. 3. The gas generation system of claim 1, wherein the electrically operated propellant includes: a liquid perchlorate based oxidizer,a binder, anda fuel. 4. The gas generation system of claim 3, wherein the fuel is a metal based fuel, and the metal based fuel in cooperation with the liquid perchlorate based oxidizer provides the electrically operated propellant with a specific energy of 600 to 1100 Joules per gram at ambient pressure. 5. The gas generation system of claim 3, wherein the fuel includes a metal based fuel in a ratio of 5 to 30 percent by mass of the electrically operated propellant. 6. The gas generation system of claim 5, wherein the metal based fuel includes tungsten in a ratio of around 10 to 25 percent by mass of the electrically operated propellant. 7. The gas generation system of claim 1, wherein the electrically operated propellant has an elastic modulus of 300 psi or greater at room temperature. 8. The gas generation system of claim 1 comprising at least one nozzle in communication with the combustion chamber. 9. The gas generation system of claim 1 comprising a controller coupled with an electrical power source coupled with the at least two electrodes, the controller is configured to control ignition, extinguishing and throttling of the electrically operated propellant, and the controller includes: an ignition module configured to control the application of the electrical input to the electrodes at the ignition condition,an extinguishing module configured to interrupt the application of the electrical input to the electrodes at the extinguishing condition, anda throttling module configured to adjust the application of the electrical input to change a burn rate of the electrically operated propellant. 10. The gas generation system of claim 9, wherein the controller includes a pressure monitoring module, and one or more of the ignition, extinguishing and throttling modules communicate with the pressure monitoring module to control one or more of the ignition, extinguishing and throttling of the electrically operated propellant according to a monitored pressure. 11. An electrically operated propellant comprising: a liquid perchlorate based oxidizer of approximately 50 to 90 percent of the mass of the electrically operated propellant;a binder of approximately 10 to 30 percent of the mass of the electrically operated propellant;a metal based fuel of approximately 5 to 30 percent of the mass of the electrically operated propellant; andwherein the electrically operated propellant is configured to ignite and extinguish according to the respective application and interruption of an electrical input to the electrically operated propellant. 12. The electrically operated propellant of claim 11, wherein the liquid perchlorate based oxidizer is an aqueous solution having an oxidizer concentration of at least 70 to 90 percent. 13. The electrically operated propellant of claim 11, wherein the metal based fuel in cooperation with the liquid perchlorate based oxidizer provides the electrically operated propellant with a specific energy of around 600 to 1100 joules per gram at ambient pressure. 14. The electrically operated propellant of claim 11, wherein the metal based fuel includes tungsten in a ratio of around 20 percent by mass of the electrically operated propellant. 15. The electrically operated propellant of claim 11, wherein the electrically operated propellant has an initial total impulse value at an initial time, and a mature impulse value at a second time after storage for at least 30 days at a temperature of around 140 degrees Fahrenheit, and the mature total impulse value is substantially the same as the initial impulse value. 16. The electrically operated propellant of claim 11, wherein the electrically operated propellant is configured to extinguish while subject to pressures of greater than 200 psi to around 2000 psi with the interruption of an electrical input. 17. The electrically operated propellant of claim 11, wherein the liquid perchlorate based oxidizer is configured to ignite the electrically operated propellant after the electrically operated propellant is stored for at least 30 days at a temperature of around 140 degrees Fahrenheit. 18. A method of using an electrically operated propellant located within a combustion chamber comprising: igniting an electrically operated propellant by applying an electrical input to the electrically operated propellant;generating pressurized gas within the combustion chamber from the combustion of the ignited electrically operated propellant, pressure in the combustion chamber reaching more than 200 psi; andextinguishing the electrically operated propellant with the interruption of the electrical input while the electrically operated propellant is subject to the pressure of more than 200 psi. 19. The method of claim 18 comprising directing the pressurized gas through at least one nozzle extending from the combustion chamber. 20. The method of claim 19, wherein igniting and extinguishing of the electrically operated propellant are repeated at one or more stages during launch or flight of a launch vehicle. 21. The method of claim 19, wherein directing the pressurized gas through at least one nozzle includes selectively directing the pressurized gas through two or more nozzles according to an attitude control instruction. 22. The method of claim 18 comprising changing the electrical input applied to the electrically operated propellant to change a burn rate of the electrically operated propellant and correspondingly change a rate of generation of the pressurized gas from a first rate to a second rate different from the first rate. 23. The method of claim 18 comprising igniting a second propellant with the generated pressurized gas. 24. The method of claim 18 comprising storing the electrically operated propellant for at least 30 days at a temperature of around 140 degrees Fahrenheit, the electrically operated propellant has an initial total impulse value before storage and a mature total impulse value after storage, wherein the initial and mature total impulse values are substantially the same. 25. The method of claim 18 comprising compressing a second gas with the pressurized gas. 26. The method of claim 18 comprising controlling a shape of the electrically operated propellant according to a propellant elastic modulus of at least 300 psi at room temperature during one or more of launch and flight of a launch vehicle including the electrically operated propellant therein. 27. The method of claim 18, wherein extinguishing the electrically operated propellant includes extinguishing the electrically operated propellant with the interruption of the electrical input while the electrically operated propellant is subject to the pressure of more than 200 psi to 2000 psi.
연구과제 타임라인
LOADING...
LOADING...
LOADING...
LOADING...
LOADING...
이 특허에 인용된 특허 (3)
Reed ; Jr. Russell (Ridgecrest CA) Cornia Richard P. (Logan UT), Extinguishable propellant composition.
Petersen, Eric L.; Seal, Sudipta; Stephens, Matthew; Reid, David L.; Carro, Rodolphe; Sammet, Thomas; Lepage, Alex, Solid propellant rocket motor having self-extinguishing propellant grain and systems therefrom.
Villarreal, James K.; Deppert, Thomas M.; Langhenry, Mark T.; Summers, Matt H., Electrically controlled variable force deployment airbag and inflation.
Summers, Matt H.; Villarreal, James K.; Langhenry, Mark T.; Danforth, Jeremy C.; Walter, John W., Electrode ignition and control of electrically operated propellants.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.