보고서 정보
주관연구기관 |
강원대학교 Kangwon National University |
연구책임자 |
최예환
|
참여연구자 |
최용관
,
장태연
,
김성순
,
최동순
,
지경용
,
이용섭
|
보고서유형 | 최종보고서 |
발행국가 | 대한민국 |
언어 |
한국어
|
발행년월 | 1996-11 |
주관부처 |
농림부 |
사업 관리 기관 |
강원대학교 Kangwon National University |
등록번호 |
TRKO200200019287 |
DB 구축일자 |
2013-04-18
|
초록
▼
기존에 설치되어 있는 농업용 수리구조물은 대부분 시멘트 콘크리트로 건설되어 건설재료, 시공, 사용·환경, 구조·외력 요인 등에 따라 많은 문제점을 내포하고 있다.
현재 국내에서 시공되고 있는 농업용 수리구조물의 건설재료는 시멘트 콘크리트이고, 보수·보강 재료는 대부분 외국제품에 의존하고 있으며, 보수·보강 시공방법도 역학적 성능의 검토없이 외국 기술업체의 추천에 따라 그대로 도입하거나 경험에 기초를 둔 구조설계자의 판단에 의해 이루어지고 있다.
따라서 국내의 경우 보강재료의 기준, 선정방법 및 이를 사용하여 수리구조물을
기존에 설치되어 있는 농업용 수리구조물은 대부분 시멘트 콘크리트로 건설되어 건설재료, 시공, 사용·환경, 구조·외력 요인 등에 따라 많은 문제점을 내포하고 있다.
현재 국내에서 시공되고 있는 농업용 수리구조물의 건설재료는 시멘트 콘크리트이고, 보수·보강 재료는 대부분 외국제품에 의존하고 있으며, 보수·보강 시공방법도 역학적 성능의 검토없이 외국 기술업체의 추천에 따라 그대로 도입하거나 경험에 기초를 둔 구조설계자의 판단에 의해 이루어지고 있다.
따라서 국내의 경우 보강재료의 기준, 선정방법 및 이를 사용하여 수리구조물을 보강한 경우의 구조적 성능에 대한 규명 기술은 매우 취약하다. 특히, 국내에서 수리구조물의 보수 및 보강에 대한 수요가 급증하고 있음에 비추어, 새로운 보수보강재의 개발 및 보수보강 공법에 대한 평가기술의 개발은 시급한 단계에 와 있다.
폴리머 콘크리트는 시멘트 콘크리트 또는 강재로 시공이 불가능한 구조물에 효과적으로 이용될 수 있기 때문에, 신건설재료인 폴리머 콘크리트를 구조물에 응용하기 위한 연구가 다각적으로 이루어지고 있다. 외국의 경우 과거에는 방식 라이닝재, 보수재나 접착재로 이용되었으나, 최근에는 저장용 탱크, 건축물 기초, 수리구조물, 터널용 등에 적극적으로 이용되고 있다.
본 연구에서 수행할 주요 연구내용 및 범위는 다음과 같다.
가. 보수·보강재의 특성연구
보수·보강 재료의 기초적 성능평가를 위한 준비단계로서, 기존의 시멘트 콘크리트에 비해 폴리머 콘크리트가 가진 우수한 특성인 경화속도의 조절가능, 조기강도의 발현, 높은 압축·휨·인장 강도, 내구성, 내약품성, 피로강도, 충격저항성, 방수성 등에 대한 기초적 성질의 구명이 완료되었으며, 폴리머 시멘트계 및 폴리머계 보수보강재의 성능평가에 대한 연구를 하였다. 또한 보수·보강 구조물의 진단을 위하여 조사를 실시하였다.
나. 보수·보강 기법의 응용연구
농업용 수리구조물의 구체적 보수·보강 기법에 관한 연구는 1차년도의 보수보강재의 기초적 성질 및 성능평가, 보수·보강 구조물의 진단을 행한 후, 2차년도에서 실용성을 검토하였다. 사전 준비단계로 실제 현장 적용성 검토를 위해 보수 보강재의 성능 평가와 산업현장에서의 경제적 가치 여부 파악을 하는 등 실제 보수·보강에 대비하였다.
2차년도는 농업수리구조물 보수·보강 기법의 응용연구 단계로서 구체적 연구내용은 다음과 같다.
(1) 보수보강재의 성능평가 : 농업용 수리구조물의 보수·보강 재료에 대한 물리-역학적 성능을 평가하였음.
(가) 보수·보강재의 선정
(나) 보수·보강재의 성능평가
(다) 보수·보강재의 적용방법
(2) 보수·보강 구조물의 진단 : 농업용 수리구조물에 발생한 파손원인을 구명하여 보수·보강 대책을 수립코자 함.
(가) 구조물의 손상현황 조사
(나) 구조물의 손상원인 구명
(다) 보수·보강 대책 강구
(3) 개발된 보수보강재의 현장적용 : 본 연구진이 개발한 보수보강재를 손상된 농업용 수리구조물에 적용하여 범용성을 검토하였음.
(가) 보수보강재의 특성 평가
(나) 보수보강재의 현장적용성 평가
Abstract
▼
Most of existing agricultural hydraulic structures were built with cement concrete. Almost every structures have more or less damaged because of various reasons such as material used, construction methods, conditions when constructed, structure and external load condition, water quality, and managem
Most of existing agricultural hydraulic structures were built with cement concrete. Almost every structures have more or less damaged because of various reasons such as material used, construction methods, conditions when constructed, structure and external load condition, water quality, and management methods. The damaged structures have posed huge problems in effectively managing and maintaining the system and demanded to repair and reinforce before use in season.
Now, construction material of agricultural hydraulic structures being used in our country is cement concrete. Most of materials for repairing and reinforcing are imported from foreign countries. Also, methods for repairing and reinforcing are directly introduced according to an advice from foreign industry of technology without investigation of dynamic performance or the decision of designer for structure on the basis of experience.
Therefore, criterion for repairing and reinforcing materials, selection methods, and evaluation methods for repaired and reinforced structures do not exist. In addition, existing methods and materials for repair and reinforcement are too difficult or expensive to apply to agricultural hydraulic structures. However, by considering that repairing and reinforcing demands for hydraulic structures are rapidly increasing, development of new but economic technique to repair and reinforce the damaged hydraulic structure is urgent. Also, evaluation methods for the repair and reinforcement works need to be developed.
Because polymer concrete can be effectively used in structures, which can not be constructed by cement concrete and steel materials, the study for applying polymer concrete as new construction material to structures has been diversely carried out. In past days, other countries use it as repamng or bonding material, but recently they use it as storage tank. foundation of building, hydraulic structure, material for tunnel, etc.
The contents and scope of this research are as follow:
1) Study on characteristics of repmr and reinforcement materials
As the first stage of developing a technique for repair and reinforcement, basic engineering characteristics of polymer concrete are exploded. Data are collected and analyzed. Specific topics that were studied are as follow:
A. Evaluation of repair and reinforcement material
Characteristics of repair and reinforcement material for agricultural hydraulic structures were evaluated.
① Selection of repair and reinforcement matelial
② Evaluation for performance of the material
③ Application methods of repair and reinforcement material
B. Examination and diagnosis of damaged structures
Damaged structures al"e carefully examined to find reasons why they were damaged.
① Status of damaged hydraulic structures
② Examination of damaged hydraulic structures
③ Development of repairing and reinforcing methods.
C. Field application of developed repair and reinforcement material
① Evaluation for characteristics of repair and reinforcement material
② Evaluation on capability for field application of repair and reinforcement material
2) Study on polymer concrete application methods
In the first year of the two year project, engineering characteristics of polymer concrete was studied. In the second year, field application tests and evaluations and economic assessments were preformed at various structures that have damages.
목차 Contents
- 표지...1
- 제출문...2
- 요약문...3
- Summary...9
- CONTENTS...17
- 목차...19
- 제1장 서론...21
- 제1절 연구개발의 필요성...22
- 제2절 연구내용 및 범위...27
- 제2장 농업용 수리구조물의 실태분석...39
- 제1절 서론...39
- 제2절 구조물의 손상실태...40
- 제3절 농업용 수리구조물의 실태분석...44
- 제4절 결론...59
- 제3장 보수보강재의 성능평가...61
- 제1절 서론...61
- 제2절 재료 및 연구방법...63
- 제3절 결과 및 고찰...74
- 제4절 결론...100
- 제4장 보수보강재의 현장적용 평가...103
- 제1절 서론...103
- 제2절 보수보강 대상지역 선정...105
- 제3절 재료 및 연구방법...109
- 제4절 보수보강 현장시공...116
- 제5절 결론...134
- 제5장 사례별 보수보강 적용기법 연구...137
- 제1절 서론...137
- 제2절 구조물 손상원인 분석...138
- 제3절 보수보강공법 조사...140
- 제4절 사례별 보수보강 공법...155
- 제5절 결론...166
- 제6장 종합결론 및 건의 사항...168
- 제1절 종합결론...168
- 제2절 종합평가...172
- 제3절 실용화를 위한 제언...173
- 참고문헌...178
※ AI-Helper는 부적절한 답변을 할 수 있습니다.