보고서 정보
주관연구기관 |
한국생산기술연구원 Korea Institute of Industrial Technology |
연구책임자 |
조영준
|
참여연구자 |
이호길
,
은탁
,
서효원
|
발행국가 | 대한민국 |
언어 |
한국어
|
발행년월 | 1994-06 |
주관부처 |
국무조정실 |
사업 관리 기관 |
한국생산기술연구원 Korea Institute of Industrial Technology |
등록번호 |
TRKO200200055177 |
DB 구축일자 |
2013-04-18
|
초록
▼
우리나라 중소기업의 공장자동화 수준은 아직 단위기기의 자동화 단계이지만 이 단계가 갖는 중요성은 매우 크다. 제조업에서 자동화가 가능한 공정의 자동화, 가령 가공물을 붙이고 떼내는 공정의 자동화, 그리고 보조기구의 도입, 또한 CAD 활용, 측정 및 검사의 자동화 및 간이 자동화는 노동 집약에의 의존에서의 탈피가 시급한 우리나라 여건 상 매우 중대한 비중을 갖고 있다. 자동화를 실현한다고 하여도 그 주요 요소기술이나 핵심부품, 가령, 볼스크류 및 써보모터 등을 대부분 수입하고 있다는 것을 생각 할 때, 자동화 공급업체, 예를 들어
우리나라 중소기업의 공장자동화 수준은 아직 단위기기의 자동화 단계이지만 이 단계가 갖는 중요성은 매우 크다. 제조업에서 자동화가 가능한 공정의 자동화, 가령 가공물을 붙이고 떼내는 공정의 자동화, 그리고 보조기구의 도입, 또한 CAD 활용, 측정 및 검사의 자동화 및 간이 자동화는 노동 집약에의 의존에서의 탈피가 시급한 우리나라 여건 상 매우 중대한 비중을 갖고 있다. 자동화를 실현한다고 하여도 그 주요 요소기술이나 핵심부품, 가령, 볼스크류 및 써보모터 등을 대부분 수입하고 있다는 것을 생각 할 때, 자동화 공급업체, 예를 들어 엔지니어링, 기기 및 설비 공급 업체와, 국산 설비를 사용하려는 수요업체에 대한 자금 지원을 포함하여, 나라가 정책적인 배려를 보다 활발히 해주어야 할 것이다. 또한 새로운 설비에 대한 투자 및 새 기술 도입에 따른 위험부담의 감소를 위해 나라가 재정지원을 하는 연구소나 관련기관이 이를 지원해 줄 수 있게끔 연구지원 체제가 강화 되어야 하며, 기술보험제도의 도입을 신중히 검토해야 한다. 그러나 아짇 중소기업을 위한 산업기술인력, 기술지도 기관의 숫자, 정보수집 및 제공 등의 산업 기반이 매우 뒤떨어져 있는 점을 생각할 때, 나라가 제조업체에 대한 기술지원을 오랜 관심으로 지속하여야 할 것이다. 단위 기기, 공장 그리고 회사 전체에서의 정보 통신에서의 공통성 확보를 위한 나라 사이 FA표준화 활동이 활발히 이루어 지고 있다. 아직 CIM을 경영 전략으로까지 채택하지 않은 기업에서는 표준화의 필요성이 절실하지 않을 수도 있으며, 현 싯점에서 표준화가 완성되지 않았기 때문에 표준화로 인한 혜택을 당장 받을 수는 없다해도 그 흐름을 따라올 수 있게끔 나라가 정책적으로 표준화를 잘 이끌어 나가야 할 것이다.
Abstract
▼
The factory automation of Korean mid and small size industry is at the level of unit machine automation. The level, however, has very large improtance. It is significant to realize the automation of unit process shch as loading/unloading of work piece, to introduce zig and fixture, to apply CAD, to
The factory automation of Korean mid and small size industry is at the level of unit machine automation. The level, however, has very large improtance. It is significant to realize the automation of unit process shch as loading/unloading of work piece, to introduce zig and fixture, to apply CAD, to automate measurement and inspection, and/or to accomplish simple automation in the view of the status of Korea where the break from the labor intensiveness is much urgent. The political concideration of government including fund support to supplying industry of the automation, shch as engineering company, and manufacturer of part or facility, and to the user industry which are to equip with the domestic facilities, should be given to mid and small size industry to enhance the self supporting ability in the circumstances that the major facilities and technology are imported in spite of the endevour for the factory automation. Also the thchncal support via the R&D institutes or other related utilities which are fund supported by government, should be strengthened, and technological insurance system should be reviewd carefully to reduce the risk bearing expected in case of introducing new techonolgy and facilities requring high cost. It is desirable to maintain the supporting policy in long term concern, since the industrial basis such as technical manpower, information, and the number of supporting facilities is not sufficient to help the mid and small size industry. The international activities for the standardization of FA is under vigorous progess which aims establishment of commonness in the information exchange and networking for unit machine, factory and the whole company. The necessity for standard, however, may not be sincere to the industry which has not yet adopted the CIM as a management strategy, and at this point it is not gauranteed to have benifit of standardization since the international FA standardization is not completed. In this regards, the government has the responsibilities to lead the standardization by achiving the follow-up of the industry itself.
목차 Contents
- 제 1 장 서 론...10
- 제 2 장 나라 안 제조업 자동화의 현황...11
- 제 1 절 자동화의 현 수준과 전망...11
- 제 2 절 나라 안 공장 자동화 현황...13
- 1. 자동화 산업 기기의 비중...13
- 2. 자동화 기기 수요 공급 규모...14
- 3. 공장자동화율...16
- 제 3 장 자동화와 관련한 주요 나라의 기술개발 동향...18
- 제 1 절 기술개발 정책...18
- 1. 일 본...18
- 2. 유 럽...19
- 3. 미 국...21
- 제 2 절 나라 사이 FA 표준화의 흐름...23
- 제 4 장 자동화 추진 현황 및 방안...27
- 제 1 절 지금 까지의 자동화 추진 현황...27
- 제 2 절 사업 추진을 위한 요인 분석...27
- 1. 배경 분석...27
- 2. 수요업체의 기술 및 기술 외의 문제점...28
- 3. 공급업체의 기술 및 기술 외의 문제점...30
- 4. 지원 기관의 현황...31
- 5. 자금면 분석...32
- 제 3 절 추진방법...33
- 1. 추진사업 내용...33
- 2. 추진 체계...34
- 3. 발전 계획...35
- 제 5 장 자동화 및 정보 통합시스템 개발...38
- 제 1 절 필요성...38
- 제 2 절 지금까지의 현황...38
- 1. 자동화/정보화 추진 현황...38
- 2. 통합시스템 추진의 문제점...39
- 3. 자동화 시장 규모...39
- 제 3 절 기술개발 내용...40
- 1. 통신 프로토콜...40
- 2. 데이타 표준화...42
- 3. 시스템 개발...43
- 4. 광역 통신망 접속...44
- 붙임 자료...45
- 제 6 장 결 론...49
※ AI-Helper는 부적절한 답변을 할 수 있습니다.