보고서 정보
주관연구기관 |
동신대학교 산학협력단 DongShin University |
보고서유형 | 2단계보고서 |
발행국가 | 대한민국 |
언어 |
한국어
|
발행년월 | 2011-03 |
과제시작연도 |
2010 |
주관부처 |
교육과학기술부 Ministry of Education and Science Technology(MEST) |
등록번호 |
TRKO201300012898 |
과제고유번호 |
1345123923 |
사업명 |
원자력연구기반확충사업 |
DB 구축일자 |
2013-07-29
|
키워드 |
중합.콘택트렌즈.함수율.산소전달률.전자빔.Polymerization.Contact lens.Water content.Oxygen transmissibility.Electron beam.
|
DOI |
https://doi.org/10.23000/TRKO201300012898 |
초록
▼
Ⅲ. 연구개발의 내용 및 범위
본 연구 개발은 첫째, 전자빔을 이용하여 콘택트렌즈 제조에 이용되는 하이드로겔 폴리머를 합성하였으며 이 합성반응에 요구되는 최적의 전자빔 조사조건을 도출하였다. 둘째, 열중합 방법에 의해 합성된 폴리머를 이용하여 제조된 콘택트렌즈와 현재 시판되고 있는 상업용 콘택트렌즈에 전자빔을 조사(irradiation)하여 표면개질을 시도하였다. 이와 같이 전자빔에 의해 표면처리된 콘택트렌즈의 물리화학적 특성을 규명하고자 다음과 같은 내
용을 수행하였다.
(1차년도: 2009년)
- HEMA(
Ⅲ. 연구개발의 내용 및 범위
본 연구 개발은 첫째, 전자빔을 이용하여 콘택트렌즈 제조에 이용되는 하이드로겔 폴리머를 합성하였으며 이 합성반응에 요구되는 최적의 전자빔 조사조건을 도출하였다. 둘째, 열중합 방법에 의해 합성된 폴리머를 이용하여 제조된 콘택트렌즈와 현재 시판되고 있는 상업용 콘택트렌즈에 전자빔을 조사(irradiation)하여 표면개질을 시도하였다. 이와 같이 전자빔에 의해 표면처리된 콘택트렌즈의 물리화학적 특성을 규명하고자 다음과 같은 내
용을 수행하였다.
(1차년도: 2009년)
- HEMA(2-hydroxyl ethylmethacrylate)를 모노머로 이용하여 가교제와 개시제 없이 일정 선량의 전자빔만을 이용하여 콘택트렌즈 제조용 폴리머(polymer) 합성
- 전자빔에 의한 중합반응에 대해 전자빔의 에너지와 선량에 따라 폴리머의 합성 정도를 측정하여 최적의 전자빔 조사 조건 도출
: 0.8, 1.5, 2 MeV에서 10, 20, 50, 80, 100, 120 kGy의 선량으로 전자빔 조사
- 전자빔에 의해 중합되고 제조된 콘택트렌즈의 표면과 물리화학적 및 광학적 특성을 살펴보기 위해 FT-IR, FE-SEM, UV-Visible spectrophotometer 등의 분석기기를 사용하였으며, 함수율, 산소전달률(Dk/t), 등의 렌즈의 물리적특성을 값을 측정
(2차년도: 2010년)
- HEMA(2-hydroxyl ethylmethacrylate)와 TRIS(3-(trimethoxysilyl)propyl methacrylate), MMA(methylmethacrylate) 등의 모노머(monomer)를 이용하여 열중합 방법에 의해 폴리머를 합성한 후 콘택트렌즈 제작
- 열중합방법에 의해 합성된 폴리머로 제작된 콘택트렌즈와 시판되고 있는 상용 콘택트렌즈에 0.8 MeV 전자빔 에너지에서 10, 20, 50, 80, 100 kGy의 전자빔선량을 조사
- 전자빔 조사된 콘택트렌즈의 물리화학적 특성 및 광학적 특성 변화를 분석하기 위해 FT-IR, XPS, UV-Visible spectrophotometer 등의 분석기기를 이용함
- 렌즈 표면의 화학적 작용기(functional group)와 광투과율 변화를 추적하였으며, 렌즈의 함수율(%), 산소전달률(Dk/t), 접촉각(contact angle) 등의 물리적특성을 분석함
Abstract
▼
Ⅲ. CONTENT AND EXTENT
In this work, first we synthesized hydrogel polymer which can be used in contact lens using electron beam(EB) irradiation without any cross-linker and initiator. We also provided the best reaction conditions for applying the electron beam irradiation.
Secondary, electron
Ⅲ. CONTENT AND EXTENT
In this work, first we synthesized hydrogel polymer which can be used in contact lens using electron beam(EB) irradiation without any cross-linker and initiator. We also provided the best reaction conditions for applying the electron beam irradiation.
Secondary, electron beam was irradiated to the contact lens surface which was synthesized thermal polymerization method and commercial contact lens to modify physical and/or chemical properties. To investigate the effects of EB irradiation on the physical properties of the contact lens, we performed following experiments:
(1st year: 2009)
- Poly-HEMA which can be used for the soft contact lens was synthesized by using EB without any cross-linker and initiator contact lens.
- The degree of polymerization was measured depending on the EB dose to provide the best synthetic condition under the EB irradiation.
: 10, 20, 50, 80, 100, 120 kGy of absorbed dose was introduced to the lens at 0.8, 1.5, 2 MeV energy.
- To characterize the physical and/or chemical and optical property of the contact lens polymerized by EB irradiation, FT-IR, FE-SEM, UV-vis spectrophotometer were used and water content(%), oxygen transmissibility(Dk/t) were measured.
(2nd year: 2010)
- Fabricate the contact lens using the polymer synthesized by the thermal polymerization method using the monomers : MMA(methyl-methacrylate), HEMA(2-hydroxylethyl methacrylate), TRIS(tris-(trimethylsiloxsil)).
- Electron beam was irradiated to the contact lens surface which was synthesized thermal polymerization method and commercial contact lens to modify physical and/or chemical properties. The dosage of EB was 10, 20, 50, 80, 100 kGy at 0.8 MeV energy in the atmosphere.
- FT-IR, FE-SEM, UV-vis spectrophotometer were used to characterize the surface state, physical and/or chemical and optical property of the contact lens treated with EB.
- Various chemical functional groups on the lens surface were monitored, and several physical properties of the contact lens such as the water content(%), oxygen transmissibility(Dk/t) were measured.
목차 Contents
- 제출물 ... 1
- 보고서 요약서 ... 2
- 요약문 ... 3
- SUMMARY ... 6
- CONTENRS ... 9
- 목차 ... 10
- 제1장 연구개발과제의 개요 ... 11
- 1. 연구개발의 목적 ... 11
- 2. 연구개발의 필요성 ... 11
- 제2장 국내 · 외 기술개발현황 ... 14
- 1. 국내의 기술개발현황 ... 14
- 2. 국외의 기술개발현황 ... 15
- 제3장 연구개발 수행 내용 및 결과 ... 16
- 1. 연구개발 내용 ... 16
- 2. 연구개발 결과 ... 30
- 제4장 연구개발 목표 달성도 및 관련분야에의 기여도 ... 81
- 1. 최종목표 ... 81
- 2. 당해단계목표 및 달성도 ... 81
- 제5장 연구개발결과의 활용계획 ... 83
- 제6장 연구개발과정에서 수집한 해외 과학기술정보 ... 84
- 제7장 참고문헌 ... 86
※ AI-Helper는 부적절한 답변을 할 수 있습니다.