최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
DataON 바로가기다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
Edison 바로가기다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
Kafe 바로가기주관연구기관 | 한국표준과학연구원 Korea Research Institute of Standards and Science |
---|---|
보고서유형 | 1단계보고서 |
발행국가 | 대한민국 |
언어 | 한국어 |
발행년월 | 2011-10 |
과제시작연도 | 2011 |
주관부처 | 미래창조과학부 Ministry of Science, ICT and Future Planning |
등록번호 | TRKO201300015257 |
과제고유번호 | 1345165292 |
사업명 | 한국표준과학연구원연구운영비지원 |
DB 구축일자 | 2014-01-13 |
키워드 | 응용기술.국방응용.기반표준.측정표준.와트 저울.Application technology.military application.physical metrology.measurement standard.Watt balance. |
DOI | https://doi.org/10.23000/TRKO201300015257 |
Ⅲ. 연구개발의 내용 및 범위
■ 기반표준 산업응용기술 분야
•MEMS 기술을 활용한 열량형 질량유량계 센서 개발
- 유량 범위와 정확도가 개선된 열량형 질량 유량계 센서 설계
- 센서 제작을 위한 표준 MEMS 제작 공정 개발
- 센서 성능 평가를 위한 유량 특성 시험 수행
•미소적층 구조물 3D 형상 측정기술개발
- 고속 콘포컬 현미경 개발 (형상 반복도 < 1 ㎛)
- TSV 형상 측정 기술 개발 (공간 분해능 : 1 ㎛)
•위성카메라 성능평가용 적분구 광원 개발
- 위성카
Ⅲ. 연구개발의 내용 및 범위
■ 기반표준 산업응용기술 분야
•MEMS 기술을 활용한 열량형 질량유량계 센서 개발
- 유량 범위와 정확도가 개선된 열량형 질량 유량계 센서 설계
- 센서 제작을 위한 표준 MEMS 제작 공정 개발
- 센서 성능 평가를 위한 유량 특성 시험 수행
•미소적층 구조물 3D 형상 측정기술개발
- 고속 콘포컬 현미경 개발 (형상 반복도 < 1 ㎛)
- TSV 형상 측정 기술 개발 (공간 분해능 : 1 ㎛)
•위성카메라 성능평가용 적분구 광원 개발
- 위성카메라의 분광 복사휘도 감응도 특성 시험 평가용 적분구 광원 개발
- 적분구 광원: 직경 50 ㎝, 구경 20.0 ㎝, 재질: PTFE
- 적분구 광원의 분광 복사휘도 및 휘도 분포균일도 측정 장치 개발
•압전재료를 이용한 동압센서 개발
- 최대 측정 범위 100 MPa, 감도 측정 오차 ± 2% 이내의 동압센서 고유모델 개발
•고온 압력센서 모듈 제작 및 기초성능 시험
- 구조해석 프로그램을 이용한 고온 압력센서 감지부 설계
- SiC 기반 고온 압력센서 감지부 제작을 위한 미소 공정 설계
- 고온 압력센서 팩키징 설계 및 제작
- 상온 성능평가 (감도/선형성/반복성)
•중전기기 산업체의 현장용 변성기 시스템 평가 기술
- CT 및 PT 부담 평가용 이동용 박스 제작
- CT 및 PT 부담의 현장 평가 기술
- 임의의 부담에서 PT 오차 계산 기술 및 유효성 검증
•전력선 기반 시각정보방송 송수신 시스템 개발
- 최적의 PLB 송 수신 플레트폼 연구
- 시연용 PLB 송 수신 시스템 제작 및 특성평가
■ 기반표준 국방응용기술 분야
•함정의 자기정숙화 기술 개발
- 국가표준에 소급된 함정의 소자/탈자 성능평가 기술개발(1 nT/h) 및 소자 기초 기술 개발
•전자기펄스(EMP) 센서 교정시스템 개발
- 시간영역 안테나측정시설 개선 및 성능평가
- D-dot sensor 교정시스템 개발(∼3 GHz, 불확도: 1.0 dB)
• 레이저를 이용한 수중 이동체 정밀 탐색
- 정밀 유동장 측정을 위한 광학 시스템 설계 (도플러 천이량 < 10 MHz)
- 유동 묘사를 위한 유동 시스템 설계 및 시뮬레이션 수행
- 광-유체 통합 실험 시스템 구현 (유속: 1 m/s, Re>10,000)
•원자중력계 개발
- 냉각된 원자를 이용해 원자 간섭계를 구성하고 그 간섭계를 사용하여 2x10-7 @1s 의 분해능을 가지는 중력계 개발
■ 질량신정의 실현 설계 분야
- 국외 NMI 와트저울 현황 및 장단점 분석
- 와트저울 사양 검토 및 자석부, 구동부, 광학부 기초 설계
Ⅲ. Contents and Scope
■ Application technologies for industry
•Development of MEMS based thermal mass flowmeter
- Design thermal mass flowmeter sensor with wide flow range and high sensitivity
- Development of standard fabrication process for MEMS sensor
- Experiment flowrate-characte
Ⅲ. Contents and Scope
■ Application technologies for industry
•Development of MEMS based thermal mass flowmeter
- Design thermal mass flowmeter sensor with wide flow range and high sensitivity
- Development of standard fabrication process for MEMS sensor
- Experiment flowrate-characteristics for performance evaluation of developed flowmeter sensors
•3D profile metrology for microscopic structures
- High speed confocal microscope (repeatability in profile measurement < 1 ㎛)
- Profile measurement of a TSV (spatial resolution: 1 ㎛)
•Development of the integrating sphere source for calibration of cameras used in space
- Development of the PTFE integrating sphere source for the calibration of spectral radiance responsivity of cameras used in space
- PTFE integrating sphere: 50 ㎝ in diameter with an aperture of 20 ㎝ diameter
- Development of the measurement system for characterization of the integrating sphere source
•Development of dynamic pressure sensors using piezoelectric materials
- Measurement range < 100 MPa,
- Measurement error < ± 2 %
•Development and performance evaluation of a high temperature pressure sensor
- Design of a sensing cell based on FEM numerical analysis results
- Microelectronic fabrication process development for the SiC sensing cell
- Development of a sensor packaging
- Preliminary performance tests at room temperature (sensitivity/linearity/repeatability)
•Evaluation technology of instrument transformer system on site for heavy electric industry
- Fabrication of travelling box containing shunt resistor for evaluation of current transformer burden
- Fabrication of travelling box containing resistor with negligible reactive component for evaluation of potential transformer burden
- Evaluation of current transformer burden using the shunt resistor at both 5 A and 1 A
- Evaluation of potential transformer burden using the resistor at 110 V
- PT error calculation technology at arbitrary burden and Verification
•Development of transceiver system for power line based time broadcasting
- Study on an optimal transceiver platform for PLB
- Implement and characteristic evaluation of a demonstration PLB transceiver system
■ Application technologies for defense
•Development of magnetic silencing techniques for naval vessels
- Development of vessel’s degaussing and deperm performance evaluation techniques traceable to the national standards and basic degaussing techniques
•Development of EMP sensor calibration system
- Improvement and evaluation of the time domain antenna range
- Development of d-dot sensor calibration system (∼3 GHz, uncertainty: 1.0 dB)
•Precision searching of submerged objects using a laser system
- Design of the optical system for flow measurement (Doppler shift: < 10 MHz)
- Design and numerical simulation of a water flow system
- Realization of a optics-fluid mechanics combined system (Velocity: 1 m/s, Re>10,000)
•Development of an atomic gravimeter
- Development of a gravimeter based on an atomic interference with resolution 2x10-7 @1s
■ watt balance
- By case study of watt balances being developed in other NMIs, We determined specifications, strategy, and basic designs for the KRISS watt balance.
과제명(ProjectTitle) : | - |
---|---|
연구책임자(Manager) : | - |
과제기간(DetailSeriesProject) : | - |
총연구비 (DetailSeriesProject) : | - |
키워드(keyword) : | - |
과제수행기간(LeadAgency) : | - |
연구목표(Goal) : | - |
연구내용(Abstract) : | - |
기대효과(Effect) : | - |
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.