보고서 정보
주관연구기관 |
(주)이쓰리 |
연구책임자 |
차승훈
|
참여연구자 |
정인성
,
박영준
,
지찬수
,
천효창
,
성낙근
,
김수진
,
허재훈
,
전준영
,
배재근
|
보고서유형 | 최종보고서 |
발행국가 | 대한민국 |
언어 |
한국어
|
발행년월 | 2016-09 |
과제시작연도 |
2015 |
주관부처 |
환경부 Ministry of Environment |
등록번호 |
TRKO201700003983 |
과제고유번호 |
1485013315 |
사업명 |
환경정책기반공공기술개발사업 |
DB 구축일자 |
2017-09-20
|
키워드 |
생활폐기물.원가산정.시스템.수집/운반.표준화.Municipal solid waste.Cost estimating.System.Collection and Conveyance.Standardization.
|
DOI |
https://doi.org/10.23000/TRKO201700003983 |
초록
▼
개발 목적 및 필요성
현행 수집·운반비용 원가산정 과정(전문업체 용역발주, 매년 약 2,000만원의 예산 사용)을 표준화하고 정형화하여 S/W로 개발한다. 이를 통해 별도의 용역 발주 없이 원가를 산출하여 막대한 지방비와 행정력 절감이 가능하다.
연구개발 결과
생활폐기물 수집·운반 원가산정 방법 표준화 모델을 개발하여 원가산정 지원시스템 구축 완료. 구축된 시스템은 전용 홈페이지 또는 프로그램을 보급하는 방안으로 지방자치단체에 보급할 계획이다. 시스템 구성요소로는 결과를 도출하는 리포트 기능 및 사용자가 원하는 방식
개발 목적 및 필요성
현행 수집·운반비용 원가산정 과정(전문업체 용역발주, 매년 약 2,000만원의 예산 사용)을 표준화하고 정형화하여 S/W로 개발한다. 이를 통해 별도의 용역 발주 없이 원가를 산출하여 막대한 지방비와 행정력 절감이 가능하다.
연구개발 결과
생활폐기물 수집·운반 원가산정 방법 표준화 모델을 개발하여 원가산정 지원시스템 구축 완료. 구축된 시스템은 전용 홈페이지 또는 프로그램을 보급하는 방안으로 지방자치단체에 보급할 계획이다. 시스템 구성요소로는 결과를 도출하는 리포트 기능 및 사용자가 원하는 방식으로 저장이 가능한 기능, 저장 된 정보의 이력 및 DB 관리 기능으로 구성된다.
성능사양 및 기술개발 수준
본 연구를 통해 구축된 시스템은 웹 표준 및 웹 호환성을 준수하였으며, UX 분석을 통한 사용자 중심 인터페이스로 구성되었다. 현행 원가산정 과정을 표준화 및 정형화하여 소프트웨어로 개발하였다.
활용계획
본 시스템의 모의원가산정 기능을 활용해 현행 지방자치단체의 생활폐기물 수집·운반비용 원가를 검증하는 용도로 사용하며, 향후 폐기물관리법 개정을 통해 본 시스템을 활용해 작성된 원가산정 보고서를 활용할 수 있다면, 전용 홈페이지 또는 프로그램 배포 등을 통해 지방자치단체에 보급하여 활용할 계획이다.
(출처 : 요약서)
Abstract
▼
Ⅳ. Results
1. Development of standardized model of cost calculation method of collection and transportation of daily waste
To develope standardized model, it deduced the influence factors stage by stage such as generation source by daily waste kind, collection, transportation, vertical differe
Ⅳ. Results
1. Development of standardized model of cost calculation method of collection and transportation of daily waste
To develope standardized model, it deduced the influence factors stage by stage such as generation source by daily waste kind, collection, transportation, vertical difference, and etc., and as it tied each influence factor and weighted influences by each index, it developed a standardized model that has difference that appears less than ±5 compared to development of algorithm and actual service calculated value that cost per a ton is calculated.
Also, analyzing deduced the vehicle move time and amount of collected waste from field investigation data, it deduced unit waste collection time required (min/ton). After calculating time required of collection and transportation of waste, optimal supply scale (number of vehicle and employee) is calculated based on previously calculated data.
Blending with deduced result as above and rules regarding the cost calculation for agency contract for collection and transportation according to a notification No. 2016-108 of Ministry of Environment, it developed a standardized model that calculates the cost of collection and transportation
2. Development of cost calculation supporting system for collection and transportation of daily waste
The system consists of introduction, cost calculation method, mock cost calculation, requesting cost calculation, and community function, and introduction consists of introduction of the system, and cost calculation method consists of use contents of guidance about method of each function.
Mock cost calculation is the function that user may confirm cost calculation result after directly registering input information, and the result may be used as reference material. After inputting basic information, the result may be confirmed immediately. After choosing priority waste kind (general waste, food waste, recycle waste), it progresses as "input information -> check input information -> check supply scale of collecting vehicle and collector -> check cost of collection and transportation -> save the result".
Cost calculation request is the function to request a report for preparing basis about cost calculation amount of local government, and there are total two methods: the function requesting with clicking the cost calculation request button and the function that is not going through mock cost calculation process. User may request as user inputs basic information and fills in what to request.
The community consists of contents about notification, user questionnaire, and etc. about system operation, and it is constructed as general bulletin form.
3. Supply system to local government and plan management plan
If development of this system is completed, the organization that may do maintenance of the system and support business to local government is required. It temporally calls the operational organization of this system as 'the cost calculation supporting center for collection and transportation of daily waste (hereinafter supporting center)' and ‘Solid Waste Collection Transportation Cost Estimating Support Center (SWSC)'. Supporting center manages and maintains 'cost calculation system for collection and transportation of daily waste' from the Ministry of Environment and supports mock cost calculation task of local government, and it performs to submit as it fills out detail report of the cost calculation if there is request of local government.
Before supplying the cost calculation system to local government, demo-business and pre-test are conducted in order to increase reliability and accuracy about the system. When system construction is completed, it selects a part of government and conducts demo-business about mock cost calculation system or reflects it by checking what to supplement. After completion of demo-business, it extends user to local government of all parts of nation and conducts pre-test of mock cost calculation system for certain period (about 3 months). From local government that participated in test, it collects problem and improving opinion and finally supplement.
If system demo-business and test are completed, it progresses maintenance control about system use to local government of all parts of nation from 2017. System maintenance control is conducted in service contracted type about maintenance from the Ministry of Environment, and the Ministry of Environment offers server operation and system maintenance cost.
Maintenance organization performs tasks such as system management, offering cost calculation method information, mock cost calculation system use and satisfaction investigation, compensating the defect, and etc., it should report to the Ministry of Environment every year.
(출처 : SUMMARY)
목차 Contents
- 표지 ... 1제 출 문 ... 3요 약 서 ... 4요 약 문 ... 7SUMMARY ... 13목차 ... 19표목차 ... 21그림목차 ... 241. 서론 ... 27 1-1. 연구개발과제의 개요 ... 272. 국내외 기술개발 현황 ... 30 2-1. 국내 현황 ... 30 2-2. 국외 현황 ... 313. 연구수행 내용 및 결과 ... 32 3-1. 연구개발의 내용(범위) 및 최종목표 ... 32 3-2. 연구개발 결과 및 토의 ... 34 3-3. 연구개발 결과 요약 ... 2214. 목표 달성도 및 관련분야 기여도 ... 226 4-1. 목표달성도 ... 226 4-2. 관련분야 기여도 ... 2285. 연구결과의 활용계획 ... 230 5-1. 연구개발 결과의 활용계획 ... 2306. 연구과정에서 수집한 해외과학기술정보 ... 2347. 연구개발결과의 보안등급 ... 2348. NTIS에 등록한 연구시설·장비현황 ... 2349. 연구개발과제 수행에 따른 연구실 등의 안전조치 이행실적 ... 23410. 연구개발과제의 대표적 연구실적 ... 23411. 기타사항 ... 23512. 참고문헌 ... 235끝페이지 ... 236
※ AI-Helper는 부적절한 답변을 할 수 있습니다.