폭포의 성인과 발달과정에 따른 유형 분류 : 설악산, 제주도, 한탄강 유역 폭포를 중심으로 A study on waterfall classification by form and process:Focusing on waterfall of Seoracksan, Jeju Island, Hantan River basin원문보기
폭포(瀑布)는 하나의 하천단위(channelunit)이며, 소규모 급경사 산지하천 중 기반암하상(bedrock bed)의 종단면이 급경사인 지점에 물이 흐르는 것으로 아직까지 절대적인 높이, 경사, 유량에 대한 기준은 없다. 우리나라에서 폭포를 하천지형으로 인식하고 연구한 사례가 없으며, 이번 연구를 필두로 장기적인 경관변화의 전개양상까지 알 수 있는 심도 있는 연구가 요구된다. 본 연구의 목적은 폭포의 성인과 발달과정을 통해 지형적 형상으로 표출되는 유형을 분류하는 것이다. 폭포의 성인과 발달과정은 폭포침식의 특징에 의해 결정된다. 침식에 영향을 주는 요인을 폭포의 높이, 경사도, 구성암석, 하천력(stream power)으로 간주하고 이들 요인에 따라 폭포의 유형이 상이하게 나타날 것이라는 가설을 검증하고자 하였다. 연구대상으로 선정한 설악산 폭포 23개, 제주도 폭포 4개, 한탄강 유역 폭포 3개, 총 30개에 임의대로 번호를 붙였다. 실외에서 폭포의 높이, 경사도, 계곡의 주방향, 유수의 방향, 폭호너비, 구성암석을 조사했으며 실내조사에서 구성암석과 폭포가 위치한 고도를 파악하였다. 화강암과 현무암지역의 폭포는 다양한 절리계에 따른 경사도에 의해 폭포가 발달하고 있음을 관찰할 수 있었다. 조사 결과, 세 가지 범주로 폭포유형을 분류하였고 결과는 다음과 같다. 1. 형성원인을 절리계와 경사도로 간주하고 분류한 결과 나타나는 유형이다. 1) 절리발달에 의해 형성된 폭포유형은 사면에 발달한 절리계를 따른 유로 변경형, 판상절리부분의 분리에 의한 돌출형, 굴식(plucking)작용에 의한 돌출형, 수직절리에 의한 수직형, 절리면을 따른 암괴의 분리에 의한 계단형, 절리에 의해 분리된 암괴가 유로를 막아 형성된 암괴형이 있다. 2) 하상 경사도에 의해 발달되는 폭포는 수평이거나 수평에 가까운 사면(20° 이하의 경사도), 하류기반형 사면(20~60°), 수직적이거나 수직에 가까운 사면(60°이상) 총 3가지 유형이 있다. 2. 침식의 유형에 따른 폭포 분류에서 설악산 폭포는 뒤로 후퇴하면서 천이점에서 상단의 각을 이루는 부분이 완만해지고 높이도 낮아지는 침식유형인 ‘대체후퇴형’을 보였으며 제주도와 한탄강 유역의 폭포는 경사도와 높이의 변화 없이 평행하게 수직절리를 따라 뒤로 후퇴하는 ‘평행후퇴형’을 보였다. 3. 지형적 특색에 따라 폭포를 분류할 때는 하류경사형(슬라이드 폭포, 유로 변경형 폭포), 계단형(...
폭포(瀑布)는 하나의 하천단위(channelunit)이며, 소규모 급경사 산지하천 중 기반암하상(bedrock bed)의 종단면이 급경사인 지점에 물이 흐르는 것으로 아직까지 절대적인 높이, 경사, 유량에 대한 기준은 없다. 우리나라에서 폭포를 하천지형으로 인식하고 연구한 사례가 없으며, 이번 연구를 필두로 장기적인 경관변화의 전개양상까지 알 수 있는 심도 있는 연구가 요구된다. 본 연구의 목적은 폭포의 성인과 발달과정을 통해 지형적 형상으로 표출되는 유형을 분류하는 것이다. 폭포의 성인과 발달과정은 폭포침식의 특징에 의해 결정된다. 침식에 영향을 주는 요인을 폭포의 높이, 경사도, 구성암석, 하천력(stream power)으로 간주하고 이들 요인에 따라 폭포의 유형이 상이하게 나타날 것이라는 가설을 검증하고자 하였다. 연구대상으로 선정한 설악산 폭포 23개, 제주도 폭포 4개, 한탄강 유역 폭포 3개, 총 30개에 임의대로 번호를 붙였다. 실외에서 폭포의 높이, 경사도, 계곡의 주방향, 유수의 방향, 폭호너비, 구성암석을 조사했으며 실내조사에서 구성암석과 폭포가 위치한 고도를 파악하였다. 화강암과 현무암지역의 폭포는 다양한 절리계에 따른 경사도에 의해 폭포가 발달하고 있음을 관찰할 수 있었다. 조사 결과, 세 가지 범주로 폭포유형을 분류하였고 결과는 다음과 같다. 1. 형성원인을 절리계와 경사도로 간주하고 분류한 결과 나타나는 유형이다. 1) 절리발달에 의해 형성된 폭포유형은 사면에 발달한 절리계를 따른 유로 변경형, 판상절리부분의 분리에 의한 돌출형, 굴식(plucking)작용에 의한 돌출형, 수직절리에 의한 수직형, 절리면을 따른 암괴의 분리에 의한 계단형, 절리에 의해 분리된 암괴가 유로를 막아 형성된 암괴형이 있다. 2) 하상 경사도에 의해 발달되는 폭포는 수평이거나 수평에 가까운 사면(20° 이하의 경사도), 하류기반형 사면(20~60°), 수직적이거나 수직에 가까운 사면(60°이상) 총 3가지 유형이 있다. 2. 침식의 유형에 따른 폭포 분류에서 설악산 폭포는 뒤로 후퇴하면서 천이점에서 상단의 각을 이루는 부분이 완만해지고 높이도 낮아지는 침식유형인 ‘대체후퇴형’을 보였으며 제주도와 한탄강 유역의 폭포는 경사도와 높이의 변화 없이 평행하게 수직절리를 따라 뒤로 후퇴하는 ‘평행후퇴형’을 보였다. 3. 지형적 특색에 따라 폭포를 분류할 때는 하류경사형(슬라이드 폭포, 유로 변경형 폭포), 계단형(cascade), 돌출형(돌출형, 돌출선반형 폭포, 원형극장형 폭포, 암괴형 폭포), 수직형 등 크게 4가지 유형이 나타난다. 최종적으로 사례지역을 연구할 때 침식유형을 제외한 형성원인과 그에 따라 발달한 지형적인 형상을 기준으로 하여 분류방법을 개발하였다. A(수평:20° 이하), B(하류경사: 20~60°), C(수직: 60° 이상) 총 3가지의 범위의 경사도를 갖는 사면 형상과 1(하류경사형), 2(계단형), 3(돌출형) 총 3개의 지형적 형상을 결합하여 9개 유형으로 30개의 폭포를 분류한 결과이다. 1. 1/B형(하류경사형, 20~60°)의 폭포가 15개로 50%를 차지하고 제일 많은 유형이다. 2. 1/C형(하류경사형, 60°이상)과 3/C형(돌출형, 60°이상)은 각각 4개씩의 폭포가 해당되고 두 번째로 많은 유형이다. 3/C형이 많이 나타나는 이유는 수직절리가 잘 발달한 현무암 폭포하단이 분리되는 발달과정을 거쳤기 때문이다. 3. 1/A형(하류경사형, 20°이하), 2/B형(계단형, 20~60°), 3/B형(돌출형, 20~60°)은 각각 두개의 폭포가 해당되는데 세 번째로 많은 유형이며, 모두 설악산에 분포한다. 4. 2/C형(계단형, 60°이상)에는 제주도의 천제연폭포 하나만이 이 유형에 해당된다. 연구 결과, 폭포의 발생과 발달과정에 영향을 가장 많이 주는 요인은 절리유형이다. 절리유형은 암석의 종류에 따라 다른 양상을 보인다. 결국 폭포의 유형을 결정하는 가장 큰 요인은 ‘구성암석’이다. 폭포가 형성될 때부터 구성암석에서 발달한 절리에 따라 폭포의 침식의 방향과 유형이 결정되고 이는 폭포의 높이, 하상의 경사도에도 영향을 미친다. 가시적으로 절리유형은 경사도로 반영되고 절리유형과 경사도, 높이 등은 지형적인 형상으로 표출되기 때문에 본 연구에서 개발한 방법에 이 두 항목을 적용한 것이다.
폭포(瀑布)는 하나의 하천단위(channel unit)이며, 소규모 급경사 산지하천 중 기반암하상(bedrock bed)의 종단면이 급경사인 지점에 물이 흐르는 것으로 아직까지 절대적인 높이, 경사, 유량에 대한 기준은 없다. 우리나라에서 폭포를 하천지형으로 인식하고 연구한 사례가 없으며, 이번 연구를 필두로 장기적인 경관변화의 전개양상까지 알 수 있는 심도 있는 연구가 요구된다. 본 연구의 목적은 폭포의 성인과 발달과정을 통해 지형적 형상으로 표출되는 유형을 분류하는 것이다. 폭포의 성인과 발달과정은 폭포침식의 특징에 의해 결정된다. 침식에 영향을 주는 요인을 폭포의 높이, 경사도, 구성암석, 하천력(stream power)으로 간주하고 이들 요인에 따라 폭포의 유형이 상이하게 나타날 것이라는 가설을 검증하고자 하였다. 연구대상으로 선정한 설악산 폭포 23개, 제주도 폭포 4개, 한탄강 유역 폭포 3개, 총 30개에 임의대로 번호를 붙였다. 실외에서 폭포의 높이, 경사도, 계곡의 주방향, 유수의 방향, 폭호너비, 구성암석을 조사했으며 실내조사에서 구성암석과 폭포가 위치한 고도를 파악하였다. 화강암과 현무암지역의 폭포는 다양한 절리계에 따른 경사도에 의해 폭포가 발달하고 있음을 관찰할 수 있었다. 조사 결과, 세 가지 범주로 폭포유형을 분류하였고 결과는 다음과 같다. 1. 형성원인을 절리계와 경사도로 간주하고 분류한 결과 나타나는 유형이다. 1) 절리발달에 의해 형성된 폭포유형은 사면에 발달한 절리계를 따른 유로 변경형, 판상절리부분의 분리에 의한 돌출형, 굴식(plucking)작용에 의한 돌출형, 수직절리에 의한 수직형, 절리면을 따른 암괴의 분리에 의한 계단형, 절리에 의해 분리된 암괴가 유로를 막아 형성된 암괴형이 있다. 2) 하상 경사도에 의해 발달되는 폭포는 수평이거나 수평에 가까운 사면(20° 이하의 경사도), 하류기반형 사면(20~60°), 수직적이거나 수직에 가까운 사면(60°이상) 총 3가지 유형이 있다. 2. 침식의 유형에 따른 폭포 분류에서 설악산 폭포는 뒤로 후퇴하면서 천이점에서 상단의 각을 이루는 부분이 완만해지고 높이도 낮아지는 침식유형인 ‘대체후퇴형’을 보였으며 제주도와 한탄강 유역의 폭포는 경사도와 높이의 변화 없이 평행하게 수직절리를 따라 뒤로 후퇴하는 ‘평행후퇴형’을 보였다. 3. 지형적 특색에 따라 폭포를 분류할 때는 하류경사형(슬라이드 폭포, 유로 변경형 폭포), 계단형(cascade), 돌출형(돌출형, 돌출선반형 폭포, 원형극장형 폭포, 암괴형 폭포), 수직형 등 크게 4가지 유형이 나타난다. 최종적으로 사례지역을 연구할 때 침식유형을 제외한 형성원인과 그에 따라 발달한 지형적인 형상을 기준으로 하여 분류방법을 개발하였다. A(수평:20° 이하), B(하류경사: 20~60°), C(수직: 60° 이상) 총 3가지의 범위의 경사도를 갖는 사면 형상과 1(하류경사형), 2(계단형), 3(돌출형) 총 3개의 지형적 형상을 결합하여 9개 유형으로 30개의 폭포를 분류한 결과이다. 1. 1/B형(하류경사형, 20~60°)의 폭포가 15개로 50%를 차지하고 제일 많은 유형이다. 2. 1/C형(하류경사형, 60°이상)과 3/C형(돌출형, 60°이상)은 각각 4개씩의 폭포가 해당되고 두 번째로 많은 유형이다. 3/C형이 많이 나타나는 이유는 수직절리가 잘 발달한 현무암 폭포하단이 분리되는 발달과정을 거쳤기 때문이다. 3. 1/A형(하류경사형, 20°이하), 2/B형(계단형, 20~60°), 3/B형(돌출형, 20~60°)은 각각 두개의 폭포가 해당되는데 세 번째로 많은 유형이며, 모두 설악산에 분포한다. 4. 2/C형(계단형, 60°이상)에는 제주도의 천제연폭포 하나만이 이 유형에 해당된다. 연구 결과, 폭포의 발생과 발달과정에 영향을 가장 많이 주는 요인은 절리유형이다. 절리유형은 암석의 종류에 따라 다른 양상을 보인다. 결국 폭포의 유형을 결정하는 가장 큰 요인은 ‘구성암석’이다. 폭포가 형성될 때부터 구성암석에서 발달한 절리에 따라 폭포의 침식의 방향과 유형이 결정되고 이는 폭포의 높이, 하상의 경사도에도 영향을 미친다. 가시적으로 절리유형은 경사도로 반영되고 절리유형과 경사도, 높이 등은 지형적인 형상으로 표출되기 때문에 본 연구에서 개발한 방법에 이 두 항목을 적용한 것이다.
Waterfall is rather a channel unit, which flows over a steep bedrock channel bed. There is no criteria for height, water volume, gradient to define a waterfall. Moreover, there are no such studies to explain waterfall as a fluvial landform. This study is a starting point to go further to understand ...
Waterfall is rather a channel unit, which flows over a steep bedrock channel bed. There is no criteria for height, water volume, gradient to define a waterfall. Moreover, there are no such studies to explain waterfall as a fluvial landform. This study is a starting point to go further to understand long-term landscape evolution surrounding mountain streams. The goal of this study is to classify waterfalls based on morphological characteristics which are the outcomes of developmental processes. The genesis and process of waterfall depend upon erosional properties of waterfall. The height, gradient, bedrocks and stream power of waterfalls are regarded as the main factors, by which waterfalls can be classified. 23 waterfalls in Seoraksan National Park, 4 waterfalls in Jeju Island, and 3 waterfalls in Hantan River basin are studied and the height, direction of flow and valleys, width of plunge pools and basal rocks of these waterfalls are measured. The findings of this study are as follows: 1. Based on developmental processes such as joint system and gradient, 1) flow path changing type, ledge type caused by sheeting joint, protruding type formed by plucking process, vertical type caused by vertical joint, and step type following joint plane and block type can be detected. 2) depending on gradient, 3 types of waterfalls can be classified, they are horizontal and near horizontal type(under 20 degree), downstream-dipping bedrock type(20~60 degree), vertical and near-vertical type. 2. Based on erosional style, waterfalls in Seoraksan belong to the replacement retreating type and waterfalls in basalt bedrock belong to vertically retreating type. 3. Based on morphology, downward sloping type (sliding waterfall, path changing waterfall), cascading waterfall, protruding (protruding, ledge, amphitheater, block), and vertical types are 4 mail types of waterfalls. During the field investigation, classification scheme based on morphological form has been developed. Combining two schemes such as A type (horizontal: under 20 degree), B type (downstream-dipping: 20~60 degree), and C type (vertical: over 60 degree) solely based on gradient with 1(down sloping), 2(step), and 3(protruding), total 9 types of waterfalls are classified. Findings are as follows: 1. 15 waterfalls belong to the 1/B type(down sloping, 20~60 degree). 2. 1/C and 3/C groups have 4 waterfalls in each group. Vertical joint system in basalt bedrock are the reason for the 3/C type dominance. 3. 1/A, 2/B, and 3/B groups have 2 waterfalls in each group. 4. 2/C group has only one waterfall, which is Chonjeyoun waterfall in Jeju Island. This study finds out that the most important factor for the development of waterfalls is joint system. Development of joint system varies depending on bedrocks. Flow directions and erosional types are decided by the density and direction of joint system in the bedrock, which also decide the height and gradient of stream bed. Joint type decides the gradients of the bed, joint type, gradient and height of waterfalls, therefore, decides morphological characteristics, to which newly-developed scheme can be applied.
Waterfall is rather a channel unit, which flows over a steep bedrock channel bed. There is no criteria for height, water volume, gradient to define a waterfall. Moreover, there are no such studies to explain waterfall as a fluvial landform. This study is a starting point to go further to understand long-term landscape evolution surrounding mountain streams. The goal of this study is to classify waterfalls based on morphological characteristics which are the outcomes of developmental processes. The genesis and process of waterfall depend upon erosional properties of waterfall. The height, gradient, bedrocks and stream power of waterfalls are regarded as the main factors, by which waterfalls can be classified. 23 waterfalls in Seoraksan National Park, 4 waterfalls in Jeju Island, and 3 waterfalls in Hantan River basin are studied and the height, direction of flow and valleys, width of plunge pools and basal rocks of these waterfalls are measured. The findings of this study are as follows: 1. Based on developmental processes such as joint system and gradient, 1) flow path changing type, ledge type caused by sheeting joint, protruding type formed by plucking process, vertical type caused by vertical joint, and step type following joint plane and block type can be detected. 2) depending on gradient, 3 types of waterfalls can be classified, they are horizontal and near horizontal type(under 20 degree), downstream-dipping bedrock type(20~60 degree), vertical and near-vertical type. 2. Based on erosional style, waterfalls in Seoraksan belong to the replacement retreating type and waterfalls in basalt bedrock belong to vertically retreating type. 3. Based on morphology, downward sloping type (sliding waterfall, path changing waterfall), cascading waterfall, protruding (protruding, ledge, amphitheater, block), and vertical types are 4 mail types of waterfalls. During the field investigation, classification scheme based on morphological form has been developed. Combining two schemes such as A type (horizontal: under 20 degree), B type (downstream-dipping: 20~60 degree), and C type (vertical: over 60 degree) solely based on gradient with 1(down sloping), 2(step), and 3(protruding), total 9 types of waterfalls are classified. Findings are as follows: 1. 15 waterfalls belong to the 1/B type(down sloping, 20~60 degree). 2. 1/C and 3/C groups have 4 waterfalls in each group. Vertical joint system in basalt bedrock are the reason for the 3/C type dominance. 3. 1/A, 2/B, and 3/B groups have 2 waterfalls in each group. 4. 2/C group has only one waterfall, which is Chonjeyoun waterfall in Jeju Island. This study finds out that the most important factor for the development of waterfalls is joint system. Development of joint system varies depending on bedrocks. Flow directions and erosional types are decided by the density and direction of joint system in the bedrock, which also decide the height and gradient of stream bed. Joint type decides the gradients of the bed, joint type, gradient and height of waterfalls, therefore, decides morphological characteristics, to which newly-developed scheme can be applied.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.