U시 H정수장 고도정수처리에서 오존(O₃) 주입량에 따른 활성탄 흡착특성 변화에 대한 연구 The Effect of Ozone-Dose Variation on Adsorption of Activated Carbon in H Advanced Water Treatment Plant in U City원문보기
일반적으로 사용되는 고도정수처리공정은 오존/생물활성탄, 그리고 입상활성탄 또는 분말 활성탄을 이용한 공정이 주로 이용되며, 오존+GAC(Granular Activated Carbon) 처리방법은 음용수 처리 시 유기물질을 제거하는데 효과적인 것으로 밝혀져 있다. 오존처리는 ...
일반적으로 사용되는 고도정수처리공정은 오존/생물활성탄, 그리고 입상활성탄 또는 분말 활성탄을 이용한 공정이 주로 이용되며, 오존+GAC(Granular Activated Carbon) 처리방법은 음용수 처리 시 유기물질을 제거하는데 효과적인 것으로 밝혀져 있다. 오존처리는 용존유기물질을 일부 감소시키고, 농약 잔류물을 파괴하는 능력이 있을 뿐만 아니라, 유기물질의 생물 분해능을 증가시킨다. 입상활성탄은 미생물들이 부착, 성장할 수 있는 많은 표면적을 제공하며, 미생물들이 안전하게 성장할 수 있도록 보호하여 준다. 상수원수중에 있는 생물학적으로 분해 가능한 유기물질들이 활성탄에 존재하는 미생물에 의하여 제거가 되어 활성탄의 수명을 연장시킬 수도 있다. 현재 우리나라에서 주로 사용되고 있는 공정은 오존과 생물활성탄을 이용한 공정이 16곳에 설치?운영 중이며, 입상 및 분말 활성탄 공정을 적용하여 5개소의 정수장에서 운영하고 있다. U시 소재 H 정수장의 경우도 1999년 후 오존 및 생물활성탄에 의한 고도정수처리시설이 설치?운영되고 있다. 본 연구에서는 오존+GAC(Granular Activated Carbon)공정 중에서 오존 주입량을 서로 달리하였을 때 GAC(Granular Activated Carbon)흡착공정 처리효율에 대해서 주로 비교?검토하였다. 연구대상 원수는 H 정수장의 모래여과지 여과수를 사용하였으며, 모래여과수를 유입수로 고도정수처리 Pilot Plant를 설치하여 연구하였다. 오존 접촉공정에서는 오존주입량을 각각 0.5(㎎/ℓ), 1.5(㎎/ℓ), 3(㎎/ℓ)로 달리하여 주입하였으며, 주입농도를 달리한 접촉유출수를 석탄계 신탄으로 채운 활성탄칼럼을 통과시켜 유출된 유출수를 분석하여 처리특성을 조사하였다. 오존접촉공정에 의한 처리수와 활성탄 흡착 공정에 의한 처리수의 분석항목별 평균농도 및 평균 제거율은 다음과 같았다. ◁표 삽입▷(원문을 참조하세요)
일반적으로 사용되는 고도정수처리공정은 오존/생물활성탄, 그리고 입상활성탄 또는 분말 활성탄을 이용한 공정이 주로 이용되며, 오존+GAC(Granular Activated Carbon) 처리방법은 음용수 처리 시 유기물질을 제거하는데 효과적인 것으로 밝혀져 있다. 오존처리는 용존유기물질을 일부 감소시키고, 농약 잔류물을 파괴하는 능력이 있을 뿐만 아니라, 유기물질의 생물 분해능을 증가시킨다. 입상활성탄은 미생물들이 부착, 성장할 수 있는 많은 표면적을 제공하며, 미생물들이 안전하게 성장할 수 있도록 보호하여 준다. 상수원수중에 있는 생물학적으로 분해 가능한 유기물질들이 활성탄에 존재하는 미생물에 의하여 제거가 되어 활성탄의 수명을 연장시킬 수도 있다. 현재 우리나라에서 주로 사용되고 있는 공정은 오존과 생물활성탄을 이용한 공정이 16곳에 설치?운영 중이며, 입상 및 분말 활성탄 공정을 적용하여 5개소의 정수장에서 운영하고 있다. U시 소재 H 정수장의 경우도 1999년 후 오존 및 생물활성탄에 의한 고도정수처리시설이 설치?운영되고 있다. 본 연구에서는 오존+GAC(Granular Activated Carbon)공정 중에서 오존 주입량을 서로 달리하였을 때 GAC(Granular Activated Carbon)흡착공정 처리효율에 대해서 주로 비교?검토하였다. 연구대상 원수는 H 정수장의 모래여과지 여과수를 사용하였으며, 모래여과수를 유입수로 고도정수처리 Pilot Plant를 설치하여 연구하였다. 오존 접촉공정에서는 오존주입량을 각각 0.5(㎎/ℓ), 1.5(㎎/ℓ), 3(㎎/ℓ)로 달리하여 주입하였으며, 주입농도를 달리한 접촉유출수를 석탄계 신탄으로 채운 활성탄칼럼을 통과시켜 유출된 유출수를 분석하여 처리특성을 조사하였다. 오존접촉공정에 의한 처리수와 활성탄 흡착 공정에 의한 처리수의 분석항목별 평균농도 및 평균 제거율은 다음과 같았다. ◁표 삽입▷(원문을 참조하세요)
Generally altitude essence control processes are the processes that mainly use ozone/Biological activated carbon, granular activated carbon (GAC) and powder activated carbon (PAC). The Ozone+GAC (Granular Activated Carbon) treatment has become popular in the drinking water treatment, with a great ef...
Generally altitude essence control processes are the processes that mainly use ozone/Biological activated carbon, granular activated carbon (GAC) and powder activated carbon (PAC). The Ozone+GAC (Granular Activated Carbon) treatment has become popular in the drinking water treatment, with a great effect in enhancing the removal of organic matters. The treatment with ozone destroys the agricultural chemical residues and increases organic matter decomposition, thereby decreasing the concentration of dissolved organic matter. The micro-organisms can grow around the entire surface of GAC. Biological decomposition of organic matter in the raw water is possible to remove excess dissolved organics and in this process, the life of the activated carbon also increases. Currently this process is widely accepted and used in many places of Korea. During the operation both GAC and PAC are used in 5 different purification plants. In 1999, for H purification in U city, the altitude essence control facility by ozone and the biological activated carbon has been established and is in operation now. In ozone+GAC process, the efficiency of dissolved organics removal was investigated by different ozone concentration and GAC dosage, each in process. In this research, H purification sand filtrate water was used. It has been established in an altitude essence control Pilot Plant. Ozonated water with the dosage of 0.5 mg/L, 1.5 mg/L and 3 mg/L are poured into column filled with activated carbon and subsequently the effluent quality was analyzed. The average concentration and average removal rate of the analyzed items in each process are shown in Table 4.11~4.12.
Generally altitude essence control processes are the processes that mainly use ozone/Biological activated carbon, granular activated carbon (GAC) and powder activated carbon (PAC). The Ozone+GAC (Granular Activated Carbon) treatment has become popular in the drinking water treatment, with a great effect in enhancing the removal of organic matters. The treatment with ozone destroys the agricultural chemical residues and increases organic matter decomposition, thereby decreasing the concentration of dissolved organic matter. The micro-organisms can grow around the entire surface of GAC. Biological decomposition of organic matter in the raw water is possible to remove excess dissolved organics and in this process, the life of the activated carbon also increases. Currently this process is widely accepted and used in many places of Korea. During the operation both GAC and PAC are used in 5 different purification plants. In 1999, for H purification in U city, the altitude essence control facility by ozone and the biological activated carbon has been established and is in operation now. In ozone+GAC process, the efficiency of dissolved organics removal was investigated by different ozone concentration and GAC dosage, each in process. In this research, H purification sand filtrate water was used. It has been established in an altitude essence control Pilot Plant. Ozonated water with the dosage of 0.5 mg/L, 1.5 mg/L and 3 mg/L are poured into column filled with activated carbon and subsequently the effluent quality was analyzed. The average concentration and average removal rate of the analyzed items in each process are shown in Table 4.11~4.12.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.