본 연구의 목적은 삼차원 CBCT 데이터로부터 파노라마 영상을 재구성하는 방법에대해 살펴보고 CBCT-재구성 파노라마를 하악골 비대칭의 진단에 응용할 수 있는지 조사하는 것이다.
삼차원 CBCT 영상, 파노라마방사선사진, CBCT-재구성 파노라마 영상에서 수직적 하악골 길이 계측과 각도 계측을 비교하였다-하악과두 길이, 하악지 길이, 하악각. 또한 비대칭 지수를 다음과 같은 공식을 사용하여 산출하였다: (menton deviated side-contralateral side)/(menton deviated side + contralateral side)×100%. 다음과 같은 결과를 얻었다.
1. CBCT 데이터로부터 파노라마 영상을 재구성하는 ...
본 연구의 목적은 삼차원 CBCT 데이터로부터 파노라마 영상을 재구성하는 방법에대해 살펴보고 CBCT-재구성 파노라마를 하악골 비대칭의 진단에 응용할 수 있는지 조사하는 것이다.
삼차원 CBCT 영상, 파노라마방사선사진, CBCT-재구성 파노라마 영상에서 수직적 하악골 길이 계측과 각도 계측을 비교하였다-하악과두 길이, 하악지 길이, 하악각. 또한 비대칭 지수를 다음과 같은 공식을 사용하여 산출하였다: (menton deviated side-contralateral side)/(menton deviated side + contralateral side)×100%. 다음과 같은 결과를 얻었다.
1. CBCT 데이터로부터 파노라마 영상을 재구성하는 프로토콜을 제시하였다.
2. 파노라마방사선사진에서 하악과두 길이의 평균적인 확대율은 하악골의 편위에 관계 없이 각각 130%와 120%를 보였다. 그러나 CBCT-재구성 파노라마 영상에서는 약 평균 100%를 나타내었다.
3. 비대칭 지수는 세 영상에서 유의한 차이를 보이지 않았다.
4. 하악각은 세 영상에서 유의한 차이를 보이지 않았다.
이상의 결과로 CBCT 삼차원 데이터로부터 파노라마 영상을 재구성하는 프로토콜을 제시하였고, CBCT 삼차원 영상과 CBCT-재구성 파노라마 영상에서의 하악골 수직 길이 정량적 계측에서 유의한 차이를 보이지 않았다. 따라서, CBCT-재구성 파노라마를 사용하여 하악골 비대칭을 정량적 진단에 응용할 수 있음을 시사한다.
본 연구의 목적은 삼차원 CBCT 데이터로부터 파노라마 영상을 재구성하는 방법에대해 살펴보고 CBCT-재구성 파노라마를 하악골 비대칭의 진단에 응용할 수 있는지 조사하는 것이다.
삼차원 CBCT 영상, 파노라마방사선사진, CBCT-재구성 파노라마 영상에서 수직적 하악골 길이 계측과 각도 계측을 비교하였다-하악과두 길이, 하악지 길이, 하악각. 또한 비대칭 지수를 다음과 같은 공식을 사용하여 산출하였다: (menton deviated side-contralateral side)/(menton deviated side + contralateral side)×100%. 다음과 같은 결과를 얻었다.
1. CBCT 데이터로부터 파노라마 영상을 재구성하는 프로토콜을 제시하였다.
2. 파노라마방사선사진에서 하악과두 길이의 평균적인 확대율은 하악골의 편위에 관계 없이 각각 130%와 120%를 보였다. 그러나 CBCT-재구성 파노라마 영상에서는 약 평균 100%를 나타내었다.
3. 비대칭 지수는 세 영상에서 유의한 차이를 보이지 않았다.
4. 하악각은 세 영상에서 유의한 차이를 보이지 않았다.
이상의 결과로 CBCT 삼차원 데이터로부터 파노라마 영상을 재구성하는 프로토콜을 제시하였고, CBCT 삼차원 영상과 CBCT-재구성 파노라마 영상에서의 하악골 수직 길이 정량적 계측에서 유의한 차이를 보이지 않았다. 따라서, CBCT-재구성 파노라마를 사용하여 하악골 비대칭을 정량적 진단에 응용할 수 있음을 시사한다.
The purpose of this study is to generate panoramic view from Cone Beam Computed Tomography(CBCT) data and to examine the application of CBCT-generated panoramic view to the evaluation of mandibular asymmetry.
3 Dimensional measurements in CBCT images, panoramic radiograph and CBCT-generated panora...
The purpose of this study is to generate panoramic view from Cone Beam Computed Tomography(CBCT) data and to examine the application of CBCT-generated panoramic view to the evaluation of mandibular asymmetry.
3 Dimensional measurements in CBCT images, panoramic radiograph and CBCT-generated panoramic view were compared in some vertical mandibular heights and angular measurements-Condylar height, ramal height, gonial angle. In addition, asymmetric index was calculated with the formula: (menton deviated side-contralateral side)/(menton deviated side + contralateral side)×100%. The results obtained were as follows.
1. Protocols that generate panoramic view from CBCT data are suggested.
2. The mean magnification rate of condylar height and ramal height on panoramic radiograph was about 130% and 120% regardless of side of chin deviation. By contrast in CBCT-generated panoramic view, mean magnification was about 100%.
3. The asymmetric indexes of CBCT images, panoramic radiograph, and CBCT-generated panoramic view were not significantly different.
4. Comparison of gonial angle. There were no significant different in three different images.
As a result, we suggested protocols that generate panoramic view from 3D CBCT datas and in the CBCT-generated panoramic view, quantitative measurements of vertical mandibular height were not significant different from measurements of 3D CBCT images. It is possible to diagnose the mandibular asymmetry using CBCT-generated panoramic view.
The purpose of this study is to generate panoramic view from Cone Beam Computed Tomography(CBCT) data and to examine the application of CBCT-generated panoramic view to the evaluation of mandibular asymmetry.
3 Dimensional measurements in CBCT images, panoramic radiograph and CBCT-generated panoramic view were compared in some vertical mandibular heights and angular measurements-Condylar height, ramal height, gonial angle. In addition, asymmetric index was calculated with the formula: (menton deviated side-contralateral side)/(menton deviated side + contralateral side)×100%. The results obtained were as follows.
1. Protocols that generate panoramic view from CBCT data are suggested.
2. The mean magnification rate of condylar height and ramal height on panoramic radiograph was about 130% and 120% regardless of side of chin deviation. By contrast in CBCT-generated panoramic view, mean magnification was about 100%.
3. The asymmetric indexes of CBCT images, panoramic radiograph, and CBCT-generated panoramic view were not significantly different.
4. Comparison of gonial angle. There were no significant different in three different images.
As a result, we suggested protocols that generate panoramic view from 3D CBCT datas and in the CBCT-generated panoramic view, quantitative measurements of vertical mandibular height were not significant different from measurements of 3D CBCT images. It is possible to diagnose the mandibular asymmetry using CBCT-generated panoramic view.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.